What BROKE On The Jeep During King Of The Hammers??

[@javas9126]

So great seeing you and Cass making videos together! She’s a great addition to the team.

[@jessehiggins509]

The other racer with the JB weld was Randal Holmes with Race mile one motorsports

[@Rooftroop]

Awesomeness! And good to see the Mrs in the shop

[@White.Elemant]

Hope you notice this: If you want to improve the heat dissipation from the transpan, you shoud at least "dull" the surface. Shiny metal is the worst surface when it comes to radiating heat.

[@JKGearandGadgets]

Thats a great idea! I didnt think of that

[@andrewsreviews4748]

That race Jeep is amazing! Feels like forever since we’ve seen some of the other Jeeps you have though. Can we see a short video showcasing the Jeep fleet? 😎

[@vavendano2000]

i like the number 5337 = jeep.

[@Thexkidd]

Too grease that on my jkur, I put the grease pin over the top of the exhaust pipe and straight across the that pita grease zerk. Lift your front tires so you can spin them as well as the drive shaft to get that zerk in the correct spot.

[@caminoracer7987]

Choosing a transmission pan has its disadvantages and advantages on both sides, on all our drag cars, we ran aluminum pans for the cooling and anything that we drove on the street. We ran steel pans because you’re eventually going to run over something and I’d rather it dent instead of crack or bust

[@anthonygendron9737]

Wait wait wait!! You didn’t have good skid plates during King of the Hammers?

[@JKGearandGadgets]

Yes we had good skid plates. They just weren't indestructible

[@tymekiller88]

How’d you lose your weight dude! I wanna congratulate you, you look healthier

[@carlpickins106]

She is a badass behind the wheel! Great video guys! Keep up the awesome videos!

[@richardagostino5085]

That’s the fever of koh every year you learn a weak spot or something you didn’t think of hope to see you back next year 👍

[@MIOffroadCustoms]

Northshore Raceworks are my local Buddies! Glad they got you fixed up!

[@texasrubicon392]

Not sure how you changed the motor mounts for the LS, but I’ll bet you can tie in a skid plate that starts in front of the oil pan and is supported at the same spot. The metalcloak skids that I installed to my 392 attach underneath the motor mounts, at the frame.

[@ITSCOOLJUSTLOVEALWAYSFAITH]

I really love the work you put into your Jeeps. I also love how both of you work great together. Awesome ❤!!

[@stevestone5903]

Was always impressed on the attention to details on that Jeep while you guys were bringing it to life.. great job! Also .. and I’m sure others have or will say it… it’s super fun to see Cassie in the mix..what a great talented wife / partner from what I’ve seen over the years.. keep the info vids coming you two!!!

[@ALongLongWaytoGO]

Sooo……Build Back Better ?…..Sounds like a plan I’ve heard before !!!!…….LMAO 😂

[@odddaysoff3356]

Could you go over the completed fuel system?

[@xTinBenderX]

Sucks that happened to the rig, but sounds like y'all have a good plan to make sure it never happens again. Stay safe from the storms coming in tonight!

[@StormbornJKU]

I need to grease all of my stuff up. Thanks for the tip on the double cardon. Didn’t know that!

[@Smokeroux]

Great Video!!!! Can’t wait to see the race video👍🏼🏁

[@coffeeblack2783]

It’s okay to make mistakes…just don’t make the same ones twice. Love the vid!

[@vavendano2000]

hahah. got a bit scared Cassie? saw ya flinch when the jeep started up. Great job as always, guys.

[@jdsoff-road6648]

Great recap, those weld on washers are pretty awesome.

[@aontiveros0713]

What are the fender/cowl side lights i been looking for something like that

[@jrmotorsports5532]

Lots of little things definitely add up.

[@caroleertel2961]

Y’all are a great team!!!

[@MrSrtman18]

So do you do that weld repair on trail? You have a welder in ur chase vehicle im guessing? Cassie just jumps in to work always. Love it. You can only weld where you can get at. Do what you can. Good work! Cassie why did you jump when rig fired up? You were ready to run for cover huh? Lol

[@timmuscarella8299]

What pillar light are you running that shine to the side not the yellow flood ones

[@JKGearandGadgets]

D and C design lights, just made a video on them! kzbin.info/www/bejne/oXq3dXWre8mpqNUsi=b-dqeMHrvZt1Z4YL

[@discover4x4]

I want to take it for a spin. 😊

[@jamesmoore2007]

Welcome to racing. Lol

[@gilhernandez605]

Whats wrong, is there a problem - why is your wife NOT wearing crocs?!?!?!?

[@FredieFarmer60]

👍🏽🇺🇸👍🏽

[@codgod7724]

Great.. Back to Race Jeep Content for the next 9 months 🫤🫤🫤