2008 2012 honda accord 2.4 codes p1009 p0341 p0301 p0302 p0303 p0304 fixed solved any honda

test components first before replacing them so diagnosing the problem will tell you a lot

[@jamescorless8283]

Man, you explain everything,i like that. Very very good video. God bless you too.

[@JM-AUTO]

thanks and same for you

[@jorgeantoniobenitez2496]

Excelente, video lo vi y me ayudo a resolver el codigo p1009 con una crv , saludos

[@JM-AUTO]

me alegra mucho Amigo gracias por compartir

[@jennymacca9856]

I’m very happy you show the process wonderful.thank you so much 😊

[@JM-AUTO]

thank you, I really appreciate it.

[@HotRod-wv4vm]

just came across your channel , awesome as I have a 2004 Honda Element with the 2.4

[@JM-AUTO]

thanks for sharing, that is very nice.

[@puccipalace]

Dude. I wish you were my mechanic. I don't even have a Mazda but I had the code issue

[@JM-AUTO]

thank you and God bless you and your Family as well.

[@joebosques]

Que buen video!!! Gracias por compartir la información!!!

[@JM-AUTO]

gracias a usted por visitar mi canal y por su comentario.

[@haroldedmundoherrera7244]

Muy bien explicado y filmado

[@JM-AUTO]

gracias por visitar este su canal deberas se aprecia mucho.

[@oldschool4388]

👆This guy is on a different level. Just WOW!!! What a great mechanic! Great video!

[@JM-AUTO]

thanks for coming to my channel and for your beautiful comment stay bless.

[@fastacker2]

Great video!

[@JM-AUTO]

thanks for your comment, it is very appreciated,

[@drkdncr]

Thanks so much for such a very informative video. I have a Honda Accord Euro CU2 2009 (Acura TSX), initially was getting P0339, I replaced CKP under engine, now I get P0341. I have ordered a replacement Cam Angle Sensor and Cam Position Sensor. Do I need to Camshaft Relearn with an OBD tool or just drive the car to relearn?

[@JM-AUTO]

thanks for sharing, no you dont, just drive like you normally do.

[@verdellhayes1305]

I love this mechanic

[@JM-AUTO]

thank you.

[@verdellhayes1305]

@@JM-AUTO you are welcome I have a 2003 Honda coupe 2.4 it started miss fire will ck tomorrow

[@javiermoreno7746]

to do this repair do you have to drain motor oil and antifreeze? Thank you

[@JM-AUTO]

No not at all, thanks for sharing.

[@linovera7070]

Hola Amigo admiro el trabajo que hizo en este vehículo, tengo un accord 2007 y el scanner me pidió reemplazar el sensor del camshaft y lo hice pero sigue marcando el mismo código

[@JM-AUTO]

gracias por visitar este su canal, chekee los componentes sospechosos con datos en vivo y tambien la valvula de aceite, si la luz se va y viene osea intermitente, normalmente es la computadora del carro, y sino checar cables primero d valvula d aceite y del camshaft sensor para determinar si el problema es electrico o mecanico.

[@JM-AUTO]

y recuerde q el scanner nunca pide reemplazar un componente sino le da pistas por donde empezar pero para eso estan las pruebas antes d remplzar algo, espero esto le ayude.

[@javigarcia4074]

@@JM-AUTO amigo tengo un problema con mi k24z7 2013 despues de las 5500rpm cuando deberia de entrar vtc a veces activa y a veces no y cuando llega activar me falla me tira misfire en los 4 cilindro y se sienta olor a pura gasolina cruda y parpadea el check me paro y lo apago y lo enciendo y el carro esta normal solo es cuando llega activar el vtc

[@florenbaron7111]

I already replaced the cam sensors. My code is P0346 because the problem is on the other side. It's a 2014 Ford Mustang V6 3.7 with dual overhead cams. I also replaced the VVT solenoids. Please tell me what I should try next. There is no check engine light but when I drive and scan at the same time I get the code on my scanner. I do have the symptoms.

[@JM-AUTO]

thanks for the visit, if you have or get a timing light, there is a timing pointer next to the crankshaft pulley put the engine on time and make a mark if the one in the crankshaft is not that visible, turn on the engine, keep timing light steady on the mark you made same direction of the timing pointer, if the light bounces back and forth if it is not steady then you have timing chain problem. also sensors from online are not that good.

[@alexsantana5377]

Buenos videos tio.. una pregunta tengo un 2005 accord 2.4 y en el scanner dice p1009 pero tambien gasta un poco de aciete. No leaks no hay humo las abujias nomas tienen carbon build up? Ya le cambie vtec solenoid, puede hacer el vvt actuator que queme aciente porque cuando salio check engine light el caro comienso con rough idle y casi baila el motor😂 gracias

[@JM-AUTO]

ola Amigo, si cambio el solenod y oil pressure switch entonces lo mas problable es q sea el vtc actuator el del problema, si no tiene codigos d tiempo, entonces chekee el vtc actuator con las repectivas pruevas antes d reempazar cuaquier parte, gracias por su visita a este su canal.

[@dnevek6227]

hola tengo una pregunta tengo un 2012 honda accord lx y tiene los códigos p1009 y p0341 cree que si le digo a mi mecánico que agá todo lo que hico usted se va componer ? el carro tiembla cuando se prende

[@JM-AUTO]

chekee la valvula d aceite talvez este sucia o defectuosa, mayormente este es el problema cuando tienes estos codigo

[@harrycorea4316]

Good morning I was wondering what do u check if ur #1 pin only shows 2.40 volts on ur intake cam sensor

[@JM-AUTO]

hi, in that case you have to follow the wire to the pcm, you might have resistence at certain point or poor connection or bad pcm or you have to update the pcm.

[@JoseRamirez-qt1ee]

Muy buen video amigo, gracias por la información, cuál es el número de parte de el empaquito que remplazaste. O el nombre por favor

[@JM-AUTO]

ola Amigo y gracias por venir a mi canal, numero de parte: 917-269 nombre: vtec gasket o junta para el vtec

[@JoseRamirez-qt1ee]

@@JM-AUTO gracias por contestar mi pregunta, muy humilde de tu parte.

[@manuelromero1844]

Disculpe donde está su taller ubicado ?

[@JM-AUTO]

ola Amigo, estoy en New York.

[@jamescorless8283]

Honda's are good cars, but everything is packed tight.

[@florenbaron7111]

I replaced the cam sensor with after market ones on Amazon. I purchased two different times to make sure I didnt get a defective one. Still have the code.

[@gagzman1]

Hello my cam shaft connector signal giving 12v with instead of 5v. Car starts fine but a lot of hesitation when engines has warmed up. I also get code P0341

[@JM-AUTO]

are you getting 12v on wire number 3? if this is the case then that is fine but on wire num 2 you get 5v if not then there is resintance somewhere.

[@gagzman1]

@JMAutoRepairnum1 yes I'm getting 12v on num 2 wire and number 3 wire

[@azharrazzaq4629]

Have ur problem solved?

[@JM-AUTO]

@@azharrazzaq4629 yes it was

[@gagzman1]

@azharrazzaq4629 yes I replaced the camshaft position sensor and the problem went away

[@gagan2929]

Where u located? I’d like for u to check my car out

[@JM-AUTO]

hi and thanks for the interest, im in The State of New York, if you are here then we can talk about locations. thnks for the visit to my channel.

[@user-rv6sv4jb2w]

Where in ny?

[@user-xz8us1su9e]

Code PO 848