2002 2013 toyota camry Matrix Rav4 Highlander Lexus 2.4 Timing Chain Replacement step by step part2

Рет қаралды 62,839

Күн бұрын

Пікірлер

@BeaverSmashing Жыл бұрын

Super clear when explaining everything, and very detailed. Really helped me out when I'm second guessing my timing marks, man! Thanks!

@JM-AUTO Жыл бұрын

thanks for your kind comment and taking the time to watch this video.

@xESPplayer500x Жыл бұрын

Your video prevemted me from pulling the engine to check the timing. Thank you

@JM-AUTO Жыл бұрын

Glad it helped, thanks for sharing and for your valuable time on the channel.

@Skylar71 Жыл бұрын

Thank You for the best video for how to do this work.. your washer idea really helped me get things correctly lined up..

@JM-AUTO Жыл бұрын

thanks for sharing and also for watching this video.

@michaelfunk5951 Жыл бұрын

You're a very good instructor. Thank you.

@JM-AUTO Жыл бұрын

I appreciate that! thanks for visiting this channel.

@michaelsekiya5291 3 ай бұрын

1st, your tip with the washers to hold the cams in place was great. 2nd, I searched other videos for the information on the 3 marks on the exhaust cam gear. Used the Middle mark. Muchos gracias hermano.

@JM-AUTO 3 ай бұрын

Glad it helped tand hanks for sharing

@joejones9944 Жыл бұрын

Great video. Very informative and I clearly understand everything You are saying and explaining. I have 2006 Camry, same engine, 213,000 miles. I'm not sure if Timing Chain has ever been replaced. Thinking about trying to replace it Myself, or find someone like You I can trust to replace it. How much do You think a shop would charge for this job? I'm in Huntsville Alabama. Thanks for the Video

@JM-AUTO Жыл бұрын

hi and thanks for the visit, may be around $500 but it will depend on the area, it is a big job, if you can do it then you would save some money it is not hard at all it just takes some time to do it and do it right, God bless you and your Family as well.

@ericsheehan1521 6 ай бұрын

Thanks nice clear video awesome job keep up the great work

@JM-AUTO 6 ай бұрын

thank you

@ericsheehan1521 6 ай бұрын

@@JM-AUTO I’m waiting on my engine to come back from the machine shop had a head gasket leaking and some threads came out with studs so there gonna redue it 👍

@blockbizzlivin3039 Жыл бұрын

We’re do you get your instruction from if u don’t mind me asking compa gracias por su ayuda

@JM-AUTO Жыл бұрын

thanks for visiting my channel, I have alldata I have to pay every month for it.

@blockbizzlivin3039 Жыл бұрын

Np and oh I see thanks compa

@frankbrooks3348 8 ай бұрын

Good job my friend 😊

@JM-AUTO 8 ай бұрын

thank you appreciate it.

@Shaunsponds 8 ай бұрын

How did you adjust the slack from the oil pump ? Did you just turn the oil pump ?

@JM-AUTO 8 ай бұрын

yes turn it so the slack goes to the other side, it is almost nothing, thanks for sharing.

@sagolfer Жыл бұрын

What sealant did you use on the timing belt cover that you waited 24 hours before installing cover on engine? I was thinking about PERMATEX ULTRA BLACK RTV SILICONE GASKET MAKER - the instructions say to put the cover on immediately and other recommend letting it dry 15-30 minutes before installing.

@JM-AUTO Жыл бұрын

i used ultra black gasket maker, in my expewrience if you put it to soon after putting the gasket maker it might or it might not leak, if you lucky nothing is going to happen. i have seen some guys redoing the job again for not waiting enough time, also if it does not leak inmediately it might leak in near future.

@sagolfer Жыл бұрын

@@JM-AUTO Thanks. I was planning to just remove the Timing Chain Cover to get to a broken stud that I can't get to easily with the cover on - it's the bottom stud/nut that holds the strut Serpentine Belt Tensioner. However, the car (2004 Camry) has 351,000 miles on it so I was thinking about replacing the timing chain since I'm in there. Is there a way to tell if by looks or measurement if it should be replaced?

@jondudas2349 4 ай бұрын

I set mine from alldata and I'm getting compression coming through the throttle body when cranking, fuel smell is coming out of the throttlebody what did I do wrong. Please help

@JM-AUTO 4 ай бұрын

may be you are unlucky or this is a coincedence because I don't see why the throttle b would have any thing to do with doing timing chain except if you took it out n did some thing wrong or there are leaky injectors or throttle b has gone bad, fuel pressure regulator.

@jondudas2349 4 ай бұрын

When cranking the engine, naturally the intake will suck air into the throttle body. But it's pushing air out. Took oil cap off and set it on top without twisting it back in, and while cranking it blew the oil cap up and off

@edrake1989 Жыл бұрын

Well done Sir!

@JM-AUTO Жыл бұрын

thanks for your time on the channel that is very appreciated.

@arnaldoventura2 Жыл бұрын

Hello, very well explained, I want to know if you can tell me how to calibrate and if you give me the values for each exhaust valve as for intake of this three-cylinder TOYOTA YARIS second series 2° XP9 (2005/2011)

@mendezavala4817 Жыл бұрын

Good job my friend u speak good English what are you from end where are you

@JM-AUTO Жыл бұрын

hi and thanks for visiting this channel, Im in NY. I really appreciate your comment.

@JoseRodriguez-vw5mo 6 ай бұрын

Hermano gracias por tu video me es de mucha ayuda…tengo una pregunta espero puedas darme tú opinión…mi carro cascabelea al acelerarle y me dijeron que en donde está la bomba del aceite lleva una parte que se quiebra y eso lo hace cascabelear…has tenido alguna experiencia con este problema del cascabeleo?…si puedes darme tu opinión te lo agradecería mucho

@JM-AUTO 6 ай бұрын

ola gracias por compartir, en esa area d bomba d aceite no lo creo, en el engranaje del vvt si hacen eso cuando ya estan malos, nose enque area escuachas el cascabeleo.

@JoseRodriguez-vw5mo 6 ай бұрын

@@JM-AUTO muchas gracias por tu respuesta…en verdad es un poco difícil poder saber exactamente de dónde viene el cascabeleo…pasa al acelerar cuando va en marcha lenta…tienes algún video cambiando ese engrane del que hablas?

@ibcrypto6139 10 ай бұрын

On my 2002 Camry 2.4 the crank timing mark using the chain when lined up with the dot to the seem on the crank case. When that is lined up the piston is not at TDC, (just by looking at the piston with the head removed). When I install the Timing chain cover and Pulley the pulley mark when lined up with 0 degree TDC then the piston is at TDC. Any thoughts what would cause this? Thank You

@JM-AUTO 10 ай бұрын

remember when piston #1 is at tdc, it will always have some play that you can play back and forward, you can live the piston within that blank space even if you dont see it exactly at 0 degrees at tdc but that is fine, since piston one is still within the blank space at tdc, may be that is your issue othere wise every thing should lineup. you can move the piston back n forward within that blank space n you will see that the crankshaft will not move but once u pull the piston out of the small blank space then the crankshaft will start moving toghether with the piston.

@Hjones1973 7 күн бұрын

Good job buddy

@JM-AUTO 5 күн бұрын

Thanks 👍

@chrisneil3588 5 ай бұрын

I have some slack in the chain in-between the two camshaft gears after I remove the washers, is this normal? All my timing marks line up

@JM-AUTO 5 ай бұрын

not really, if it is very very minimum you can get a way with it but other than that it is better to double check, unless cam gears are kind of worn out or timing chain is after market n it has some discrepancy but very very minimum should be ok with all timing marks lining up

@kurshatbil 2 ай бұрын

The question is what was the problem with the car , why did you change timing chain ?

@JM-AUTO 2 ай бұрын

the vvt-i timing gear sprocket actuator was a little bit noisy at start up

@jondavis8571 Жыл бұрын

very good 🙏🏽

@JM-AUTO Жыл бұрын

thank you I appreciate it very much.

@fernandoruiz7693 2 ай бұрын

How much in labor this usually cost as well replace the oil pump

@JM-AUTO 2 ай бұрын

about $700 and thanks for sharing

@jonathangarzon2798 9 ай бұрын

Timing chain tensioner?? When was that put on?????

@JM-AUTO 9 ай бұрын

tensioner was installed on the timing cover before installing the timing cover, it can be seen on the cover already installed.

@jaimepena6438 9 ай бұрын

How do I separate one?

@EzeHenry-e7g 6 ай бұрын

Very interesting

@JM-AUTO 6 ай бұрын

Glad you think so!

@xierxu 6 ай бұрын

Did you drain any fluids?

@JM-AUTO 6 ай бұрын

yes I did thanks for sharing

@priscripzionz 2 жыл бұрын

Isn't the hydraulic gear to be released before installation ?

@JM-AUTO Жыл бұрын

Yes it has to be unlocked before installing it and lock it once is installed before putting the timing chain. At that point I had unlocked it already n show it in the other video. Thanks for the visit appreciate it.