F-35B RC-Jetprint build series | Fuselage | Ludicrous Mode On The Bambulab X1 Carbon?!?

Let’ start some build series, this Is the Fuselage chaptor, i hope you like the printeble model😎
Dowload here:
rc-jetprint.de...
► SPONSOR ◀︎
A huge thank you to Collorfabb for providing filiaments for me to use for this model Check out their stock
colorfabb.com/....
bambulab.com/n...
👍 SUPPORT THE F-35B BUILDS 👍
/ joelvlashof
🎬 CHECK OUT THESE VIDEOS! 🎬
www.youtube.co....
www.youtube.co....
🕶 SOCIAL MEDIA 🕶
/ joel.vlashof
/ joelvlashof

[@renerosentraeger]

Fantastic job mate! Can't wait to see you again and fly our 3D-Print VTOL Jets!

[@Joelmelanie]

We need to put all our models on your headquarters ❤❤❤❤❤❤❤ and fly together 😊😊😊

[@TheGreatBooger]

Just ordered it and excited to build it and 🤞I can take a pic of it finished next to a real one.

[@Joelmelanie]

Awesome!!

[@collinw24]

so exciting, thanks so much guys!

[@Joelmelanie]

please do share the videos;)

[@sammydev8007]

Thanks Joel & Melanie. This is amazing. Prints beautifully on my X1C😀

[@andrejradulovic5666]

You and Rene nailed it!

[@Joelmelanie]

Don’t forget our third member, our siggi😃

[@andrejradulovic5666]

@@Joelmelanie Sure, sorry for missing someone :)

[@WerkplaatsvlogF35]

Awesome!

[@azdronedude]

Great video guys I am getting ready to start the print again thanks for sharing

[@BharathwajK]

Wow really a great experience and explanation for amateurs who want to start an innovative business 👍👍👍👏👏👏

[@DavidsTV]

This is amazing. I have 3 x X1C and a P1P. Do you provide all the bambu lab settings with the files?

[@Joelmelanie]

I will try too but I am still learning

[@forthwithtx5852]

Very cool stuff!

[@jwc4520]

You have come far with this, can only imagine the hours involved. I must however admit to the frailty of age and sadly admit that even with instructions it seems beyond my abilities to build . Still I shall watch and enjoy learning something new. Hey I watch rocket launches , but shall never be an astronaut. Each step solving problems I miss such adventure ... take care

[@Joelmelanie]

Thankyou John, I will write your name in side the fuselage and bring you up in the air;)

[@jesusgjchuza6491]

Wooow, so cool 🤝😎

[@uh.videosig8515]

Its amazing and I already want one but, would it be possible to smooth/make flush the wing or leading edge with the fuselage?

[@KevinMardirossian]

I would have hoped you would make a proper 3BSM, larger F-35B before you moved on to the X-32. But if the sales of these files are helping you toward that goal, it makes sense

[@Joelmelanie]

Exactly

[@Joelmelanie]

All projects are really expansive

[@KevinMardirossian]

I figured that was the case. I’m so happy to hear that these projects are successful because I know they will help you do even bigger and better work in the future.

[@basberend]

Ziet er geweldig uit. vraag me wel af, waarom zijn er geen aligners aangebracht ? zou het monteren en goed uitlijnen van de verschillende onderdelen toch een stuk makkelijker en eventueel gladder/beter laten aansluiten ??? #durf te vragen #geniet verder van je video's, Top werk man

[@Joelmelanie]

#durf te luisteren😍 goede vraag, en een dikke tip voor de volgende keer! Aligners met Carbon buisje geeft extra veel gewicht, en aligners met gleufjes zeg maar is lastig met foaming filaments, dat is nooit super nauwkeurig en je krijg onnodig veel support…maar je hebt wel gelijk. Mocht deze vraag vaker komen dan voeren wij hebben door in versie 2. Wij hebben alle contact gegevens van klanten die wij een update sturen😃

[@3dcubed]

How does one get the full .3mf file of your build, pictured right at 2 minutes into this video? Bought the files from 3djetprint, but getting your .3mf with all your Bambu settings, supports, alignment on the separate plates like that would be huge.

[@Joelmelanie]

Search for collorfabb settings they made also printing profiles for the bambulab

[@MikeMillerDrones]

I have a question on the wing EDF's. Do they need to be CW and CCW rotation? Or can they be the same rotation?

[@Joelmelanie]

Same rotation

[@patrickdepaepe2035]

Beste, Ik volg u al een geruime tijd.Prachtig werk en van een zeer hoog niveau wat u levert Doe zeker zo voort. Met mijn Ender 3 Pro heb ik al met succes een aantal planes geprint.Gewoon prachtig.Maar deze zijn niet van hetzelfde niveau als die van u. Nu zou ik een nieuwe printer willen aanschaffen. Alleen twijfel ik tussen de Ender K1 en de Bambu lab die u gebruikt. Wat is uw ervaring over de Bambu Lab?Is de hoge aankoopprijs de moeite waard? Gr. Van uw buurlandje

[@Joelmelanie]

De bambulab is top! Dankjewel voor een prachtige comment, ik baal ervan dat youtube niet alle comments waar ik nog niet op heb gereageerd eruit filterd. Succes met keuze

[@Meteor122]

but when I buy the plane on the site what do I get? because I didn't find it written anywhere

[@MikeMillerDrones]

Can you please create a shopping list of the non-printable parts with links where to buy them? I have no idea where to get the motors and servos and the sheet doesn't really give good details.

[@Joelmelanie]

The list on RC jet print as explained in the video😉

[@MikeMillerDrones]

@@Joelmelanie I'm sorry, I know I am going to be a pain, but I am building this plane, and there are some confusions. For example, on the 5th line of the parts list there is the Main ducting-JP 70 mm - 4 - 6S - 2250Kv (CCW rotation), but then on the 23rd line there is The front EDF-JP 70 mm - 6S (CW rotation). So does this mean it take 2 of the same motors, just different rotation directions? This is a $200 motor, and I don't want to order the wrong one. IF the list had links to sites where we could see the parts, it would help a lot in getting the correct ones. A lot of the parts are not available in the US. When I have completed my shopping list, I would be happy to send you a list with links so you can share it with your US customers.

[@aerosol4024]

@@MikeMillerDrones Yes, you will need two of the same EDFs with just different rotating directions

[@MikeMillerDrones]

@@aerosol4024 Thanks, Do you know if this also applies to the wing EDF's? Do they need to be one-CW and one CCW?

[@aerosol4024]

@@MikeMillerDrones For wing EDFs it's OK both rotating in same direction. You will only be able to by them as CCW anyway 😉

[@Lotus-wv3kp]

What's the infill setting? 5% in video, but 7% in Cura_printprofiles folder.

[@Joelmelanie]

I should go for 5, 7 is a bit stronger

[@itzjoeylo4501]

Could you increase the scale to fit 80mm EDFs, or even 90mm EDFs…?

[@Joelmelanie]

Would you buy it than? You can start trying to scale up in your slicer

[@itzjoeylo4501]

@@Joelmelanie yeah…. Scaled up RC aircraft fly better on a larger scale than the smaller ones. 100mm EDF’s would be slightly closer to scale and would have a lot more performance. I hope you are joking about the shredder, I take aircraft and engineering pretty seriously lol Keep’m Flyin’

[@oliviermismer]

Bonjour,quels sont les paramètres d’impression pla lw bambulab x1c Pas d’infos sur le site jet3d. Cordialement

[@serkanaydogdu5158]

Hello, can you add Turkish subtitles to your videos?

[@Joelmelanie]

I will try

[@serkanaydogdu5158]

@@Joelmelanie thanks😀

[@corevision8675]

The x-32 development model will be a better design you should use it, not the x-32 version they built and lost because they were being cheap

[@Meteor122]

but when I buy the plane on the site what do I get? because I didn't find it written anywhere

[@Meteor122]

but when I buy the plane on the site what do I get? because I didn't find it written anywhere