John Deere 333G vs. CAT 299D3 XE: HEAVY Lifting Demo

[@olivermaskell6244]

Do a comparison with an equivalent ASV please

[@samuelnichols9037]

Well I have spent over 5,000 hrs in a 333 deere skidder and I have zero complaints except for the pins wear out quite fast for me it takes about a year. Looking forward to the 335P.

[@lucaslehman5379]

I looked at one the other day and wish I wouldn’t have got my 333 last year. Really wish I would’ve waited that thing was a unit!

[@scottsymons6152]

Adding rear suitcase weights to the machine, does it increase the capacity of the machine?

[@EvergladesTV]

Adding rear counterweights increases the tipping load of the machine by increasing stability. However, they will not help the hydraulics going into relief!

[@alc7505]

This video is basically: let's point out all the good and bad things about the CAT and exagerate how terrible everything is, and make everything seem like a real drama and inconvenience..... Next lets point out all the good and bad things on the DEERE and egagerate how good it is! Bias at its best 😂😂😂😂

[@Jreddygo]

Maybe it’s because he has a lot of Johnndeere in his yard he’s trying to get rid of Lmfaoooo…..people are so trickery and try to be sneaky when it comes to “sales”….they’ll do anything 💀🤣🤡

[@joserosales4827]

How much is the deer with the Blackhawk mulcher ?

[@nicsmith353]

Please Please do a kubota 97-2 vs caterpillar 299d3 xe i need to know what is better

[@sure572]

Cat for ride quality

[@DaltonKramer-h8o]

A forestry package on the cat does have the guards over hoses under the tracks and cat has two hydraulic motors one for machine one for attachment John Deere only has one that drives both

[@digginandbuildinwv7012]

I'd be interested in the same test with a case tv450b

[@chadneil25]

Is no comparison.

[@Superstock1]

@@chadneil25 It is though. My newholland c345 will out lift, and out push both cat and deere top of the line machines. I own all 3.

[@raulsandoval2335]

Could you do a comparison with a John Deere and a new holland track loader? I like your videos and help a lot.

[@aroncrowell]

Say what you want about the lifting... but the exposed hoses and areas... have had those break on many of the Case and Bob Cats, and the 1 Cat had the same problem

[@Ionz2]

A 279 doesn’t have def also the hydraulic fluid is also in the cab you can check it from the outside while you are filling it up

[@3860476]

When a Cat is ordered as a counter weight machine from the factory. It actually has a higher lift capacity than a machine without weights. Its not explained in the brochure . But a good tech or salesman will tell you the relief pressure are different. There is about a #1000 lifting difference between a weighted spec machine and none weighted. Machine in the video was none weighted.

[@aroncrowell]

neither are weighted

[@smgkickz]

john deere 333g vs Case tv620b next?

[@alphonsotate2982]

Both will be good both are super boom tech

[@alphonsotate2982]

They both are beautiful looking machines AND can out do every body else

[@leonardrice2830]

Why not talk about price? Perfectly fine topic. We have cars and trucks from Dodge, Ford, Chevrolet that consumers have that are over $100,000. As a consumer, who just bought a skid steer for private use, Price is a consideration.

[@kills456]

Ill put it this way I bought a 331g for $97k and a 333g was like $106k for the 299d3 xe it was $124k and for the xe landmanagement i believe it was $145ish k

[@travmiller5025]

Is that Kent Murphy?

[@jeffreyhalverson83]

Two Issues: 1 - Why would you keep pricing so secretive? Pricing is almost the most important topic in comparing brands. 2 - Charlie Crockett is fantastic.

[@NYa-mo7se]

Yeah it can lift stuff, that’s it. There’s a reason you don’t see them on any construction sites.

[@brian_2040]

Being a operator for a few years, i know John Deere is stronger but after so many hours of doing that, the boom will be wore more than the cat machine. I got a lil experience with the backhoes. After 500 hours the back boom on a Deere hoe will be loose compared to a CAT. .

[@tp8030]

Deere pins and undercarriage are junk. They wear fast.

[@historicbeef]

Well. You know. In the toolbox provided with the machine. There is a white cardboard box, inside there is a grease gun… You should use it. I am pretty sure yours still in the box or you even have lost it.

[@terrytate6006]

The deer is a mighty fine machine but it still doesn't have the overhead lifting operator door

[@bradkaberline5828]

Ran them both the jd had problems with the pins falling out of the bucket we fixed it and it kept doing it then when your moving dirt you lose it and the jd people say ya we have problems with that but we'll sell you a new pin the cat 289 good machine in my opinion the old case 1845 1840 good machines for sure the old bobcat 743 853 Melrose good machines as well just the tire machines beat the hell out of you bouncing around the track smoother I recently rented a new bobcat and the guy says we need to ger renter insurance because there is a fitting that comes lose and it my catch fire no bullshit they said that. As far as them hoses on the car takes about 30 minutes to change or replace so mechanic friendly. Then a company I worked for looked at a fly ash machine once again brand new plastic on the seat wurton from jd brand new the the ac didn't even work in it so they bought the cat one for sure true story man. Nothing against jd but you'd think after buying a 80thousand dollar machine theyed give you a new bucket pin nope it only cost a few hundred dollars

[@jimd421]

I would say forget it because of the front door swinging open and not going up overhead

[@fsherman898]

I like that the Deere has 3 different styles of rocker switches. Good look

[@jasonhart1802]

You can adjust the hydraulic pressure on the main pump of that 299. Then it'll pick that 333G up and shake it!

[@chadneil25]

Bullshit.

[@shiraz1736]

So this is a promotional video for John Deere I guess.

[@runningscout14]

Rear window maybe bigger on the Deere but look at all the hard physical obstructions in your escape path.

[@henrythiessen9084]

1:50 That is not all it's got, for a guy who thinks he knows these machines you don't know shit. As you pull back that handle, engage that little switch on it, for the hydraulic switch. I guarantee it will lift that. I've ran those cat machines plenty enough to know that. Get to know the machines before you compare.

[@Ionz2]

Also there is ventilation in the back

[@smacfe]

Cat is more comfortable - more room in cab and longer wheelbase. Deere is a great machine, but I always seem to get more work done with the Cat. I agree that no Cat engineer ever had to do any service on a machine so even little things are a PITA sometimes. I wish I could put the lifting power of the Deere, the comfort and controls of the Cat, the door of the Kubota, and the power of the ASV into one machine.

[@monteschief]

Hahaha, you'll be the richest guy in the HE industry if you manage to do that.

[@DigorDie29]

The Deere does have more power and lifting capacity but wears out sooner and burns twice the fuel and probably 4 times the amount of def, speaking from experience that is a huge difference if you are operating 10 to 12 hours a day, just some food for thought

[@dan__________________]

And you have to do everything twice with the underpowered machine. None of what you said matters at that point.

[@DigorDie29]

@@dan__________________ not if you know what your doing yes it may be a little slower but not a drastic amount, compared to the double or triple amount of fuel consumption and the resale value. i was just adding this comment for anyone on the fence. They are both great machines but if your an owner operator and you can cut your fuel bill in half why wouldn't you.

[@dan__________________]

@@DigorDie29 Highly doubt that it's even a measurable amount of fuel difference with almost the same displacement engine. Speaking from experience, the guys with Cat's fill up just as often as we do with the Deere's.

[@theoneonlymonkeymanohyea6769]

I turned the relief mode off on my kitty cat lifts stuff like that up like nothing I had to go in the engine and hydraulics but we’ll worth it it’s a beast

[@nathaniellyon4855]

How do you disable the relief mode?

[@tp8030]

The need a recessed light bars.

[@Rod-d1t]

Why would anyone buy "a Dealer Only Service Machine" Deere Can keep it's stuff! I want a dealer that supports me no gouges me!

[@aaron368]

You can literally access every manual as the dealers? And you can even buy all specific service tools that the dealerships use

[@jimclark2044]

My Deere techs help me over the phone and print me off all their manuals and test procedures so I can do it myself. The local Cat dealer absolutely will not do that.

[@christophermix6845]

You spelled cat wrong.

[@DanielMartinez-rv6su]

Are you restarted?

[@bethmotgomery2662]

Well I guess for laughs and giggles, this here reminds me of a song. 🎶The foreman in the Dell🎶 🎶the foreman in the Dell🎶 🎶High ho the dairy oh the foreman in the Dell🎶 🎶The foreman takes the deere🎶 🎶The foreman takes the deere🎶 🎶 high ho the dairy oh the foreman takes the deere🎶 🎶 the deere takes the cat🎶 🎶the deere takes the cat🎶 🎶 high ho the dairy oh the Deere takes the cat🎶

[@Ionz2]

Well if you look on the 299 there is a hydraulic shutoff and I own three 299s and they will make a horrible noise if they can’t lift so I will just say turn the hydraulic shutoff off

[@digginandbuildinwv7012]

Where I live the john deere is more expensive, I bought a new cat d3 dozer and 420xe backhoe, deere doesn't even come close especially on dozer. I like the case for ctls.

[@FreelancerParvez-qe9mx]

Keep up the good work!😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍

[@mikegoch8210]

as being. a owner of both these machines i can tell you hands down my john deere gets used 10x more then the cat comfort controls work load speed accuracy the cat is honestly garbage compared to

[@JBurton393]

Bullshit. It all depends on the application. I own a cold planing company and have always used bobcat. Swapped over to a CAT lease and couldn’t be happier. Deere is junk. Unfortunately they purchased Wirtgen (our cold planers). Spending 1.5 million on a machine to have such issues is infuriating and tells you all you need to know about Deere. Luckily they have CAT engines it’s only saving grace

[@MarkWilliam-pl6qs]

There is no perfect piece of equipment. There are pros and cons to everything! And the more government regulations the more "what the ffffffuuu were they thinking" type of things you will notice.

[@jonathandemel3147]

You notice its a john deere dealer

[@DEVUNK88]

how about john deere right to repair?

[@Lazzlo22]

Congrats you just watched Deere propaganda for 20 minutes

[@juliangarber7191]

I like Deere but won’t listen to this guys “comparisons” anymore they are pretty biased.

[@Ionz2]

I’ve never seen that mesh

[@winstonpatton9682]

I love my Kubota😊

[@Ionz2]

There is a damn big ass camera and it is on THE BACK OF THE HOOD

[@BigInjun05]

Yeah I own deere now. Slowly trading them in for equipment I can personally fix.

[@Jblearthmoving]

Would you like me to explain all the nastys with the Johnny!! lol That’s why there’s none around 😂

[@1oddtech]

I've worked at a Deere dealer and HATE Deere's "Diff steer"

[@casefreed1130]

This video is so bias😂 I’ve put hundreds of hours on that cat 299 yes they could have done better in some places but he only mentioned the bad things about it and nothing that cat did to fix that

[@Ionz2]

NoW iF YoU LoOk HoW tHe Cats door handle is exposed now

[@williamcoash2658]

This guys next video how to advertise for John deere without actually being John deere 😂

[@snorelacks7069]

Wow...shocked I'll tell you! A John Deere salesman doing a video to show how much better a Deere is compared to a Cat...and not doing a very good job at it!! Also...ever notice a Deere at a trade show or even in this video with all the panels and stuff pulled off beforehand...because it's a PITA to service the dang thing.

[@alexbaer7810]

Umm what? Have you serviced a g model Deere skid steer? They're so easy. Everything is within easy reach and you have so much room to work. I think cat machines are smooth and powerful but the compact track loader lineup seems like an afterthought. The Deere is just so much nicer to own.

[@nickc7320]

Wouldn't it just make sense to have all the panels off so people can see it as they walk up? It wouldn't make sense to pull them off and put them back on all day.

[@bencumber1588]

Holy bias!

[@Anthony-stama]

stop ruining the cat's name try the 299d3 xe land magent

[@RCPropaganda]

DEF sucks. Way to ruin diesels. No proof it even helps.

[@TheJuansierra]

I am john deer guy and yes let see the bad things about john deer ! I don't think is so much😂 like others skid steer

[@shawnthefarmer5161]

we have a winner for the ugly shirt contest

[@JBurton393]

John Deere is crap compared to CAT. Our local CAT has been nothing short of amazing with service. We swapped from Bobcat to 20 CATs and would never touch Deere for our application.

[@skliros9235]

Your bias is obvious 😂

[@Ionz2]

That is the baby cat go and get a 299 see how it goes against that deere

[@bellat8448]

A friend of mine just bought a 333g. It sounds horrible when you start it. The pumps whine. There is no visibility looking down to the side. I’ll take the cat all day. And the cat rides better.

[@eriklarsson3188]

John Deere also has the loudest cab on the market, a deal breaker right there. I'll take a Bobcat over any of these machines.

[@leeshaver7825]

John Deere is a better built machine than can look at a 450 or 550 JD dozer with a 6 way blade compared to a Cat D3 or D4 like the skid steer Cat leaves the hydraulic lines exposed next to the track I guess it's a Cat thing

[@rvadventures]

Everglades is a terrible company with a terrible manager named Josh!

[@jonathanbarajas1]

Lot of Cat owners are a little upset

[@chriss7930]

Your talking crap abiut the torsion suspension mate ! Total crap