Thank You Sir.that is a sharp tractor and your work matches it.looks awsome.my concern is the k an n will work for pulling.but for field work i would no entertain the idea.maybe mount a 8640 or 8850 filter on the side the heck with hiding it.far to nice an much work to risk it.beauty to behold.
@kswaynes75697 ай бұрын
You and your "Boys"/Sons are some amazing blue collar diesel engine Engineers! Great job.
@so.md.dirtfarmer22267 ай бұрын
Thank you very much!
@ronzezulka66467 ай бұрын
Hey Bill,,,that turbo setup is a work of art!! Nicely done.
@calvint4607 ай бұрын
Great job! Can’t wait to see it on the dyno and tractor pulling!
@jasonbeecher5097 ай бұрын
Looks like lots of great ideas. Thank you very much for sharing
@so.md.dirtfarmer22267 ай бұрын
Thanks for watching!
@bryanginder59037 ай бұрын
Bill curious why on the intake pipe from the k&n filter to the turbo the pipe is choked down so small!? Looks to be plenty of room around to where the filter will sit!?
@so.md.dirtfarmer22267 ай бұрын
It may look small, but it's a full 4 inches in diameter, the flange for the filter is 6".
@bryanginder59037 ай бұрын
You guys do some vary nice work!👍
@so.md.dirtfarmer22267 ай бұрын
Thank you! 👍
@tylermillin26343 ай бұрын
What size thermostat housing are those? 1.25 inch?
@so.md.dirtfarmer22263 ай бұрын
Hey Tyler, sorry it took so long to get back to you, I was trying to get the size from the boys, they are the ones that built it. They can't remember if they were 1.25" or 1.5", it's been a while, and they've done a lot of projects since then.
@joutdoorsmen237 ай бұрын
Wow Bill You and Your Boys do Awesome work very neat and clean, She should be BEAST, God Bless
@scottberger41967 ай бұрын
U guys did a beautiful job looks great
@deerezilla70137 ай бұрын
I’d be interested in your piping kit for a stock 4240 I have 5 hole injectors in mine smokes like a freight train. A turbo kit would help
@so.md.dirtfarmer22267 ай бұрын
You can contact us by email: shop@grimesengineering.net
@joshrussell1487 ай бұрын
You guys do really clean work. I love that everything is so neatly done. Great video thanks for sharing.
@so.md.dirtfarmer22267 ай бұрын
Thanks so much! 😊
@bamanovax34297 ай бұрын
Very nice.
@frankallen94197 ай бұрын
You and your boys do fabulous work that is amazing. May God bless you and your family always in Jesus name Amen 🙏 🙌
@MorganOtt-ne1qj7 ай бұрын
Great job, and video, Bill!
@frystakfarmboys44307 ай бұрын
Real nice job. !!!! Cant wait for the next video !!
@nathanalmond82807 ай бұрын
Nice looking job. She should be nasty. Definitely more than 110 horsepower now. Thanks for sharing the video Bill.
@georgedeppner4187 ай бұрын
Really looks nice, Art can be found everywhere
@burtzorn40597 ай бұрын
Seems like 200 horse or a little more would make him a happy man and not destroy the tractor. Beautiful job you guys did installation. Be couris to see if it stays together. Again beautiful work Bill and company.
@so.md.dirtfarmer22267 ай бұрын
Hey Burt! I agree, but this guy always wants too much power, he has a Peterbuilt he hauls with that has been turned up to 1,100 hp, had to have it turned down to 900 so the head gasket would hold.
@bryanlindon64617 ай бұрын
Very good looking job.
@Scott-q6q7 ай бұрын
Awesome video keep them coming
@WalterBrady-rp8tg7 ай бұрын
Looks good bill good job
@RyanShull-q1d7 ай бұрын
Very nice job
@57fitter7 ай бұрын
Hi Bill!! What kind of heat shield are you going to have between the exhaust elbow and the coolant hoses?
@so.md.dirtfarmer22266 ай бұрын
It's farther away than it looks, but after your comment we took some temp. readings and it's not getting any hotter than the coolant that's traveling through it. So we left it as is for now.
@FailureatRetirement7 ай бұрын
Wow, great work 👍🏼🇺🇸
@williamspates10157 ай бұрын
Looks good Bill is this tractor gonna make it to Gladhills pull love to see it run.
@brianbolanz86267 ай бұрын
Awesome job !!
@meandthemrs74037 ай бұрын
Looks real nice.
@stevenarnold39357 ай бұрын
Will you have beef up the clutch. Looks beautiful
@so.md.dirtfarmer22267 ай бұрын
Yes I will!
@sawsurgeon7 ай бұрын
Wowsers, that’s downright purty! I’d like to say I’m interested in the other set up, but I better go out and buy a few lottery tickets before I run off at the mouth! I would love to see a solid 150 hp out of our 4240. Bless’ns to ya’s, Tedd
@so.md.dirtfarmer22267 ай бұрын
Hey Tedd! That set up would give you 150 hp, but you may have to put bigger tips on your injectors to get the most out of it. I'll let you know what the man would like to get for it, or we could just build one for you.
@sawsurgeon7 ай бұрын
@@so.md.dirtfarmer2226 Alrighty Bill, let me know if Scratch Offs will be sufficient or if I need to step up to the Super Lottery or whatever it’s called!🤔🤣 All kidding aside, probably not in the budget, but it doesn’t hurt to know the numbers. Again I bid you Bless’ns, Tedd
@midwayfarms7 ай бұрын
Great video
@mentholman32017 ай бұрын
So talented
@coreytrout38577 ай бұрын
That's a really nice setup and design. Where did you find those thermostat housings? That system of water pipes is better than the original aluminum housings
@so.md.dirtfarmer22267 ай бұрын
Hey Corey! We got 'em from Summit Racing Equipment.
@hobert4977 ай бұрын
Space seems tight under this hood!
@johngulbunny86527 ай бұрын
So wanting to farm too... That means a farm stick class.... Changed pump Change turbo,no more t04....lol Typical deere guys,can't run with a model 100 in a farm class. This ain't super farm ,? Why not just bolt a 8.1,p pump from wimer,and a harts 3x3 on it,
@justinblain9287 ай бұрын
Wrong color setup for me. I don’t think my rods would handle the boost anyway
@so.md.dirtfarmer22267 ай бұрын
We've turboed some 4 cyl. gas orange ones! Never bent a rod, but we blew the whole crank and main caps out the bottom of the block!
@ashtonmckee51727 ай бұрын
We have a turbo on ours I have a video of it on my you tube
@dschefers97007 ай бұрын
Is the turbo a sxe300 ?
@so.md.dirtfarmer22267 ай бұрын
Yes it is.
@dschefers97007 ай бұрын
@@so.md.dirtfarmer2226 in your opinion does the SXE series out performance the SE series?
@tomreisinger62207 ай бұрын
Did 1 8yrs ago 650+HP better do the clutch while you're at it.
@so.md.dirtfarmer22267 ай бұрын
Agreed!
@nathanburgess49287 ай бұрын
👍👍
@dsp110007 ай бұрын
any suggestions on a turbo-injection pump set up for a 354 perkins to get maximum horsepower?
@so.md.dirtfarmer22267 ай бұрын
An S200 turbo and an A inline pump would work well.
@dsp110007 ай бұрын
@@so.md.dirtfarmer2226 can you inline pump one of those ?