John Deere 8400T track tension cylinder repair

Рет қаралды 44,122

Күн бұрын

Пікірлер: 77

@ZKMasterTech 3 ай бұрын

Thanks to BRUNT for sponsoring this video! Get $10 off your first purchase with a 30-day risk-free trial at brunt.yt.link/EXOHxIQ using code ZK10.

@dphillips705 3 ай бұрын

Are they green triangled?

@MrPaxtonstang86 3 ай бұрын

Brunts are garbage!!! I went back to thorogoods

@refurbansuburban 3 ай бұрын

Well done! It's nice to see a Master Technician at work.

@BananaBobMinion 3 ай бұрын

Another amazing repair by a very talented master.

@frankblack1481 3 ай бұрын

I like the guys shop. That mezzanine rail is nicely made.

@SteveNicoson-u1i 3 ай бұрын

Thanks for another great video ZK. It was interesting and informative and enjoyable to watch. Nice work on this one ZK. Appreciate the fact that you got the basic fix done for this owner and let him decide how much farther he wants to go fixing the situation and of course the dollars he wants to lay out. My personal opinion is this tractor did not have the best of care before he got it and probably he is not wanting to spend a great deal on it. I admire you for getting the track retention and fixing the cylinder for him so the tractor can do its job although understanding it needs more work to make it 100 percent right. The owner can decide from there. Seems now days some owners want everything 100 percent right and others want it fixed to do the job and look at the other repairs as money permits. Each to their own. You did great on this one ZK and made the tractor usable. Nice work. The combine you are going to sounds like an interesting repair. Will be anxious to hear about that one. Have an interesting feedback opinion for you. And I know you keep up with the other KZbin folks so I will use names. The Larson’s had one of their combines go down first day of harvest. What completely shocked me was the engine motor came completely apart- - took the hole side of the block out, you could see inside the motor and piston and crankshaft parts all over the place. I have NEVER seen a combine engine do that before, wow wow!!!!!!! My question is have you seen that before where the side of the block virtually came apart??????? I was shocked when they filmed it. Wow. Your opinion please!!!! Obviously they are looking for a motor or a replacement combine to keep harvest going. Feel bad for them. Hard way to start harvest. Now back to you and your very professional work on this tractor. You got it going for the owner which is what he wanted. As always super work and teaching us ZK!!!!! You are appreciated!!!!!! The Iowa farm boy. Steve. 😊👍👋✅🇺🇸🇺🇸

@ZKMasterTech 3 ай бұрын

Yes I've seen low hour failures like that on the 13.5L's. We had one knocking and were bringing it into the shop and it threw a rod out of the side of the block. I yelled at Patty, "don't stop! Keep it going into the bay!". Didn't want to have to drag it. Lol what a mess that made

@SteveNicoson-u1i 3 ай бұрын

@@ZKMasterTech Thanks for your feedback. Appreciated.

@tobiasjacobsen_dk 3 ай бұрын

“So nothing will squirt everywhere”….. compresses the cylinder SQUIRRRRRRRRRRRRRRRRRRRRRT 😂

@FarmGearInnovators 3 ай бұрын

The 'dirt seal has left the chat' had me laughing! 😂 But seriously, great job diagnosing and fixing everything. Love the step-by-step breakdown!

@rawhideadventures9515 3 ай бұрын

I really liked those Left and Right sided Brunt Idler wheel installation tools. Great video again.

@GICK117 3 ай бұрын

ZK Master for the win. You made it look.....................................................semi easy.

@heatherkohlwey8379 3 ай бұрын

Incredible knowledge and skill combined with the ability to be a strongman and contortionist makes you a real pleasure to watch. Thanks for keeping harvest rolling. God bless.

@ZKMasterTech 3 ай бұрын

Appreciate that!

@littlelifters7543 3 ай бұрын

Nice job buddy. Watching from Auckland New Zealand.

@doughuffman5790 3 ай бұрын

Thanks for timely new content.

@JustinMiales 3 ай бұрын

We have a very old cat D6 and it has a grease fitting you pump grease into the cylinder that tightens the tracks and they still work perfect

@chrisgossman6512 3 ай бұрын

I always hit the like 👍 button before the video rolls and never did I have to un click it. Thanks for sharing again 😊. Happy subscriber 😊!

@grizzlyridgerunner 3 ай бұрын

Great repair video ZK MASTER TECH awesome job 💪I hope you get some time for a few motorcycle fall rides in before snow ❄️ thanks for sharing, my friend. ✌️

@oldad6207 3 ай бұрын

Those are some real deal jacks!

@nathansparrow1416 3 ай бұрын

Wear on the front idler pivot caused side load on ram .

@ivoryjohnson4662 3 ай бұрын

Great video thanks ZK

@dustinlowry9075 3 ай бұрын

Mr Zeth Love your videos keep the great work Wow Right now I’m working on the same tractor changing the fuel tank out of it. I’m going to send you some pictures

@ianmckay1780 3 ай бұрын

Thanks Zeth, that was interesting. It made a change to see the bushings slide out like they did, I know that is a rarity, so well done on that score. At least they were getting some grease where is needed to be, if not the rest of the wheels, but when did you last check your wheel rims honestly? Hope you get to show us the rest of the repairs, that would be equally interesting. From UK.

@eduardoresiopescaenargentina 3 ай бұрын

i love your job dude!! great video

@christopherschneider3323 3 ай бұрын

Those cylinders can be fun. Getting the snap ring on that front groove is the easy part, getting it back onto the groove either takes one minute or ten in my experience

@genechronister7085 3 ай бұрын

Another awesome vid! I helped replace it on our 8430t. That tractor has not gotten enough maintenance done on it,in my mind! Running it into the ground? Stay safe

@doughuffman5790 3 ай бұрын

Scam call under a tractor. You were much nicer than I would be.

@barrycox-hz7no 3 ай бұрын

Great video very informative thanks

@Tom-wj4tr 3 ай бұрын

That tractor needs a ton of work. So much deferred maintenance.

@craigadair128 3 ай бұрын

It probably has a ton of hours being 25yo at this point

@farmerfox99 Ай бұрын

did they ever grease the pins? I grease every day. my previous owner installed hoses and zerks in a nice exterior location.

@billsimpson604 3 ай бұрын

He might be able to weld that crack a bit at a time, so as to not damage the rubber by overheating it. Maybe do 3/16 inch segments.

@rezmedic57 3 ай бұрын

Don’t let diddy see that cylinder liner soap

@ZKMasterTech 3 ай бұрын

😂

@LucianoAcosta-z7h 3 ай бұрын

Buenas tardes, muy buen video como los demás videos!!

@Chris-r3r 2 ай бұрын

Never enough time to do it right but always time to do it over. Now the farmer will probably say when you finish the repairs why didn't you do while you were there the first time but will forget that you told him about it

@macdawg6403 3 ай бұрын

Nice Vid!

@macdawg6403 3 ай бұрын

Love my Brunt boots 🙂

@ДаниярСауранбеков-р9х Ай бұрын

Hi, are those 8400t tractors reliable? What are common troubles?

@AWROAL 3 ай бұрын

You’re just doing that to show your fancy new boots off!

@welderat 3 ай бұрын

hey there , could you tell me what brand those hydraulic jacks are please , wanting something for lifting self propelled harvesters

@ZKMasterTech 3 ай бұрын

Emerson

@danielaltman9945 3 ай бұрын

Zeth let me help you out with the scammers. I do this all the time. My wife says I’m crazy haha. Ask them what they’re wearing and then tell them that turns you on. Then ask them if they like to wear sandals. If they say yes, tell them you just love a set of good lookin toes! If they say no, ask why they have ugly feet. Zeth they NEVER call back! 😂😂

@frankblack1481 3 ай бұрын

Would it kill JD to tap the pins so you could attach a slide hammer and pull it out?

@larrycole4438 3 ай бұрын

Great job as always. I have a question; how long have you been working on John Deere green?

@ZKMasterTech 3 ай бұрын

15 years

@paulc.sachsejr.7209 3 ай бұрын

I’ve been waiting 2 months now for a pair of boots from Brunt that I ordered that they never told me they were on back order when i ordered them….

@dphillips705 3 ай бұрын

Should contact larson farns they need a warrenty combine engine stat lol

@lynwessel2471 3 ай бұрын

Kibble installed the new engine 2 days ago.

@julianchambers8372 2 ай бұрын

Hi, those new seals will not last very long with amount of play in the idler roller mountings bushes.

@MichaelJAvery 2 ай бұрын

Inspiring stuff…

@DrewChisholm 3 ай бұрын

gonna need a little thicker grease for that bottom pin pal

@AWROAL 3 ай бұрын

Do you never use a head torch?

@ms-mac521 3 ай бұрын

👍👍👍

@petrovivanvf8403 3 ай бұрын

john deere 8370r Received a message about a malfunction of the right brake pedal switch, tell me what the problem is?

@saqibnawaz5139 2 ай бұрын

Vry cautious repair & intervention of jd8400T tension cylinder rebuild just doing as a Nascar pit stop inorder farmer can use it to Auger jobs which is his imminent concern especially when harvest crop is ready,farmer can hav mor time afterwards to think dat he can invest more money in dis old r used tractor based on his farm job needs

@coyotemilitia5635 3 ай бұрын

"Why wouldn't the grease gun be full" Every. Time.

@johnbucklerfarms 3 ай бұрын

You just about blew out the entire Crotch of your Pants on that Move!🤣🤣

@rosshall641 3 ай бұрын

Next time do the inside idler first because when the tracks angled it'll be easier to put the outside on basically assembly is the way you disassembled and nobody likes to be vertically challenge laying down