John Lewis JLDV08 Tumble Dryer E60 Error: Complete Heating System Troubleshoot Guide! 📘🔧

[@stevepearce5182]

This is great, thanks Paul. I'll update when it is, hopefully, fixed!

[@stevepearce5182]

Result. Replaced both heater relays - furious then when it had no heat when i got it all back together. Another tear down to find i'd left one of the wires off the thermostat - ARGH! Back together and its working perfectly (touch wood!). Thanks for your help!!

[@paulocosta4320]

Hi i have a drymachine from electrolux here can i find the electric pages?

[@Pete.Ty1]

👍👍👍.Thanks

[@hotpointbrownlover3365]

its the type of dryness that you select thats why it comes out damp

[@derinteknolojiler471]

Hi guys, if your aeg/Electrolux/zanussi heat pump dryer is running 30 minutes normally and then giving e60 (e63 in test mode) just checked the upper capasitor which should be 10uf. You will see it is around 4.5 - 5.0 that is a fault.. I finally solved it. Just replace the 10uf capasitor (the above one, connected to engine motor), no soldering or antything, it is plug and play. Buy it from an electronic market showing the old faulty one, do not buy it from an AEG or other brand shoppers. Otherwise it will be 10 times expensive. There is space to place it into the machine,, so the new one can be a little fat or long, no matter, just be carefull for the values like voltage etc. They are not polarized so you can attach the 2 cables whatever you want. You don't need to disassebly tumble or any thing. Just get the back top and right panel, you will see the 10uf capasitor lying horizontally. Fyi, the below one is 18uf and you need to diassemble tumble and other things to get it back, but fourtunately you can measure it without disassemble.

[@How-to-repair]

So glad you managed to get your tumble dryer up and running again

[@fernandomatias5514]

🍀😃🍀