Don’t Waste Shop Space | Under Table Saw Cabinet Build

Building a custom cabinet to fit under the wing of a table saw.
Table Saw Cabinet Build Plans - www.johnbuilds...
Check out all my other plans! - www.johnbuilds...
JH Circular saw shaped push sticks - www.johnbuilds...
Follow on Instagram: @johnbuildsit / johnbuildsit
Facebook: / johnbuildsit
TikTok: tiktok.com/@johnbuildsit
All tools/products Used:
4’x8’ Bora Centipede Work Table - amzn.to/3uN1h11
2.5" Castors - amzn.to/3SKrueY
Drawer Pulls - amzn.to/47CGXSv
22" Drawer Slides - amzn.to/3G5IlBC
Freud 10" Ultimate Plywood Blade - amzn.to/47y2Q69
Freud 1/4" Spiral Downcut Bit - amzn.to/3QIqrtA
JessEm Table Saw Stock Guides - amzn.to/40JypHm
JessEm Miter Gauge - amzn.to/3uuxaj2
Awl Tool - amzn.to/3gtdS7k
Kreg Setup Bars - amzn.to/46kTrgs
Glu-Bot Bottle - amzn.to/49FRrlU
Plastic Shims/Spacers- amzn.to/3sDSySu
Isotunes Hearing Protection - amzn.to/3znbIeQ
Flush Cut Edge banding End Trimmers - amzn.to/358dTI5
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg K5 Pocket Hole Jig - amzn.to/35nH7T3
Kreg Right Angle Clamp - amzn.to/3JUoPrn
Cabinet Hardware Jig - amzn.to/355Jlqy
Milwaukee 18g Brad Nailer - homedepot.sjv.io/A4Lkx
Dustopper Dust Separator - homedepot.sjv.io/0J2zVO
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.... or amzn.to/2OWb4h9
Bessey F Style Clamps 6" & 12" - amzn.to/3AZNYzd
Bessey 50” Parallel Clamp - homedepot.sjv....
Bessey 24” Parallel Clamp - homedepot.sjv....
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv....
Bessey 3/4" Pipe Clamp - amzn.to/34csCkZ
Delta Cruzer Miter Saw - amzn.to/3VJH2hW
Delta Dust Collector - amzn.to/3ApNy4L or homedepot.sjv....
*As a Home Depot and Amazon affiliate I may earn from qualifying purchases made through links on this post.

[@markcogan9002]

I vote yes to a cross-cut sled build video.

[@cromakey]

Nice build, I'd love to see your take on the crosscut sled.

[@bradleytuckwell4881]

I got on KZbin to find a great design for a table saw cabinet yours was the first one that came up and it’s perfect. Well worth a sub so thanks for posting

[@JohnBuildsIt]

Awesome! I appreciate it!

[@69kaveman]

Great work! Yes to the crosscut sled video.

[@JohnBuildsIt]

Ok probably coming up soon!

[@larryo1606]

Thank you! Bought the plans, built the cabinet with my son. Came out perfect ! First time using edge banding. Didn’t have the trimmer so I used a flush trim bit on my trim router Fits with room to add a 2 1/2 tray on top under my Grizzly table saw.

[@JohnBuildsIt]

Awesome!!

[@pwisc2115]

Beautiful simple solution. Totally want to see your cross cut sled. I still mind blowing with your portable miter saw station with that awesome Milwaukee saw.

[@kohenjoiner5318]

Looking forward to the new crosscut sled vid! I always take away something essential from your vids. Many thanks, John.

[@JohnBuildsIt]

Thanks for watching!!

[@davidmagner8397]

The nice design that takes advantage of the otherwise wasted space. I have the 52” extension so I might modify it slightly but will definitely use your plans.

[@lt41385]

Yes, please on the cross-cut sled video as well! Really appreciate your videos!!

[@russellwintersteen5635]

I like the storage idea. I wanna make something similar when my new saw shows up. Gonna try something similar with my out feed table. Big space saver ideas. Love it

[@JohnBuildsIt]

Thanks for watching!

[@ThatGeekyMaker]

Nice job, good use of the space. I used that space under my saw to put my surface planer.

[@allenricafrentesr9584]

Hi John , love your build videos very informative. Clean work and straight to the point. I recently purchased couple of your plans. Soon as I have some extra time I’ll start working on them. Thanks and yes I would like to see you build a new cross cut sled!

[@JohnBuildsIt]

Thank you I appreciate it!!

[@jewdd1989]

Do a cross cut sled, any shop builds especially useful jigs to storage and cabinets, organization…. More pls! Happy to be here watching always

[@JohnBuildsIt]

Will do, thanks!!

[@LittleShadowWoodcraft]

You had me at the blade storage.... and sold me on the cross cut sled storage. Great build video. Glad I stumbled on your channel!

[@JohnBuildsIt]

Thank you!!

[@19woodworks]

Nice. Pretty simple but very good looking! And yes, id love to see a cross cut sled video!

[@g.efaber482]

This is great! I really like the simplicity and clean look. Thanks, John.

[@JohnBuildsIt]

Thanks for watching!!

[@JenkinsB]

Killer vid. Such a clean process from initial cuts to carcass assembly to drawers. Yes for the cross cut sled!

[@JohnBuildsIt]

I appreciate it!

[@pdxgigi720]

I wish i had your plans a year ago when I built mine for two reasons. I thought I needed two slide outs so while my cabinet looks great it is slightly too big for my Sawstop. And I dont use the 2nd one. Lastly, l ended up storing my sled in the same place where yours is, but I ended uo just building a short mdf box and setting it on the floor. Your plans look way neater and fit perfectly.

[@JohnBuildsIt]

Ah bummer! Sorry for procrastinating getting this done haha

[@josh_watson]

Great video. I just recently upgraded to my first Harvey Cabinet Saw, so I'm working on plans for under-table storage like this and I also need to build a crosscut sled. So yes, a video for that would be great. Thanks!

[@JohnBuildsIt]

Awesome man!

[@steveserwecki7415]

Nice build! I just purchased the plans. I have the same SawStop. Now I have the right space to store my crosscut sled, etc. I’ve also purchased other plans from you, they’re easy to follow, and accurate! Thanks for all your hard work!!!

[@JohnBuildsIt]

Thank you I appreciate it!!

[@obiwuncanoly]

That's an awesome storage cabinet for your table saw. Thank you for sharing the build with us.

[@guybowers9094]

Another great video John and a very nice cabinet. I give you the thumbs up on a crosscut sled video. Hope you and your family had a blessed Thanksgiving

[@StanCrafted]

Great video...might build one myself...though I think I will switch the side the blade storage and sled holder are on. Well done!

[@jillcarr-hilton7308]

Great videos! I’m going to be building out my first real wood shop later this year (so exciting!) and have been binge watching a ton of videos on shop storage/benches/tables etc. Your builds are some of the best I’ve seen, looking forward to giving them go.

[@JohnBuildsIt]

Nice! Thank you!!

[@davem4256]

Great project John, I’ll be looking towards building one for my52” saw stop. Thanks for sharing, it would be great to see your sled build.

[@JohnBuildsIt]

Thank you!!

[@robb9079]

Another awesome video! Getting ready to build something very similar, I also need to build a cross cut sled, so bring it on!!!

[@isaaczeitoun7767]

Great video!. I'd love to see your new sled build!

[@1975oldschool]

Good build man! I especially like the blade spacers

[@shanaproctor100]

Great build! I really enjoy seeing how you organize all the individual tools in your shop.

[@JohnBuildsIt]

Thank you!!

[@philshock3805]

Great work as usual, John. I have the same saw and built a (very), similar cabinet a few years ago loosely based on Brad's design from Fix This Build That. I did remove the front leg but didn't lose stability in the least. I made an adjustable support piece that fits between the top of the cabinet and the underside of the table extension. It's just a block fitted with a threaded insert combined with a leveling foot but it works great. I don't miss the leg in the least. I used recycled oak plywood given to me by a co-worker (previously built-in cabs), with a gross dark stain so yours certainly looks better but hey ... free! :) Really appreciate what you do.

[@JohnBuildsIt]

Yep the block in between the cabinet and saw is must have and great solution too! 👍🏽

[@amynoble3269]

Great video. Yes I would like to see a cross cut sled build.

[@dangkolache]

I love your work man, you're a big inspiration for me. I have a nice 600sqft shop that is a total mess and I look to your projects for all kinds of ideas on storage and efficiency. Keep it up brother.

[@JohnBuildsIt]

Thanks for watching i appreciate it!

[@makermark67]

Another great build, John. I've been over thinking trying to build something and this is a perfect solution and hopefully will get me out of the pralysis by analysis spot i'm stuck in. Thanks for this. Hope you and your family has a great Thanksgiving!

[@JohnBuildsIt]

Thank you, happy thanksgiving!

[@Jaypark1113]

Thanks for the video. I got several good ideas for building mine.

[@JohnBuildsIt]

Awesome thanks for watching!

[@wirelad1]

WOW John... You made that look real simple and exactly what I need. I have Laguna Fusion 3 but I'm sure the table saw dust exhaust comes out that side. Thanks away John. and yeah I'd be up for watching a new crosscut sled. I'm all new to this so simple is good! So far I've made approx £300 kindling 🔥

[@patniemczyk8860]

Yes on new crosscut sled. Great video Jon

[@JohnBuildsIt]

Thank you!

[@GooseWoodworking]

Nice build and video. Bought the plans. It doesnt appear to factor in the mobile base, though you do have it in the video. It seems you definitely have to move the legs out further than the last factory position on the Sawstop to fit it with the mobile base.

[@JohnBuildsIt]

Right 👍🏽 I said in the video I moved the legs out further

[@billm4560]

Another nice build John! 👍🏻 Can’t wait to see what you come up with on a new sled! I have one but been thinking about making a new! 😊 Thank you for sharing!

[@JohnBuildsIt]

Thank you!

[@rfdinesen4027]

Great video, execution and really nice design too. Very flexible.

[@JohnBuildsIt]

Thank you!!

[@jimrosson6702]

Absolutely great job. It turned out great

[@mattmorrisson9607]

Nice and clean, John. I like it!

[@JNewellworks]

Awesome work John I love how meticulous you are with your woodworking it is very inspiring. Thanks for sharing and keep up the great content.

[@JohnBuildsIt]

Thanks I appreciate that!!

[@CustomCutsByChris]

Nice build, John! I have the same saw and need to do something similar. Just subscribed to your channel too, looking forward for to watching more.

[@JohnBuildsIt]

Thank you!!

[@shaun30-3-mg9zs]

Hi John, Great build handy for any workbench look's good in the workshop, great video Regards from Wrexham, Wales👍

[@JohnBuildsIt]

Thank you!!

[@raulsoto2088]

Muy bueno... Te felicito... Un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

[@TheBillPayingHobbyists]

Excellent build. Kitchen quality cabinet there, nice work. Thanks for sharing. Subscribed!

[@JohnBuildsIt]

Thank you!!

[@MikeGusFifteen]

Beautiful work! I need to make one for my saw for sure.

[@JohnBuildsIt]

Thank you!!

[@billybike57]

Numbers do matter! Awesome job!

[@JohnBuildsIt]

Thank you!

[@adamkirkland4348]

Great video. First one I’ve seen from you. Would love to see cross cut sled vid.

[@JohnBuildsIt]

Thanks for watching!!

[@DavidMcCabe]

Looks great! A crosscut sled video would be cool too!😊

[@generalsworkshop]

Great job, appreciate your contact, thank you and keep it coming.

[@JohnBuildsIt]

Thank you!!

[@ronkort8927]

Nice job!

[@Ch3micalSoup]

I need to build this next! Great video , thanks!

[@JohnBuildsIt]

I appreciate it!

[@philkidd]

This is freaking awesome John! I have an older Delta Unisaw with a 52” right side support table that all sits on a mobile base, so I don’t have the ability to utilize this design, but I am inspired to build a drawer box that would fit within that space. I absolutely love all your shop builds as they are super clean and efficient. Thank you for the inspiration and keep it up. Oh and for sure, if you decide to make a new sled, that would be a great video as well I am sure.

[@JohnBuildsIt]

Thanks man!!

[@stevecox552]

great video,,, yes on eh cross cut sled vid,,,, keep up the great work.

[@billymartens7732]

Yes for the cross cut sled

[@OrganizeCreateDecorate]

This is a sharp cabinet!

[@JohnBuildsIt]

🙌🏼🙌🏼

[@dustinclark8946]

looks pretty good!

[@markraisner9000]

I aways enjoy your videos.

[@JohnBuildsIt]

Thanks Mark!

[@jdlarson1]

Great job, really enjoyed the video. Keep up the great work.

[@JohnBuildsIt]

Thank you!

[@scotter_dotter]

Looks great

[@JohnBuildsIt]

Thanks man!

[@taylorhopson9740]

Looks great!

[@mellymel1100]

Great build! :D Saving to favs.

[@frijoli9579]

That was a cool build!

[@JohnBuildsIt]

Thank you!

[@DGALVIN45]

Clean brother 💯

[@suearmstrong3404]

Awesome! Love it!!

[@JohnBuildsIt]

🙌🏼🙌🏼

[@350Zamir]

Great video! I would def cut the music out though. Love hearing just natural woodworking sounds

[@JohnBuildsIt]

Shop is right next to a busy highway unfortunately. No music would then just be road noise

[@350Zamir]

@@JohnBuildsIt oh that sucks! Anyway I subbed! Keep uploading!

[@taylorscott9605]

Great job!

[@JohnBuildsIt]

Thanks!!

[@Texas_Rigged]

Hell yea I want to see a crosscut video

[@E71T8]

Nice job

[@JohnBuildsIt]

Thanks!

[@MaddMaxxWoodWorks]

Great job

[@JohnBuildsIt]

Thank you!!

[@Louis-e8n]

I would like to see the new cross cut sled.

[@billhardy9697]

I would like to see a sliding sled build video. Thank you!

[@empoweryou1]

Love it, great build!

[@JohnBuildsIt]

Thank you!

[@stelioskantos7765]

Awesome

[@johnhester8394]

Great build as usual!

[@JohnBuildsIt]

Thanks!!

[@propatriabellum]

Nice!

[@stevexbishop]

John, your Mitre Gauge seems real close to your Sawstop Blade, do you cut a lot with the Sawstop Sensor Turned off? Nice vid, I’m liking the look of your shop. Steve

[@JohnBuildsIt]

No I don’t turn it off. Probably just the camera angle 👍🏽 it’s not that close

[@kellyscott5611]

Great use of space!

[@JohnBuildsIt]

👌🏽👌🏽

[@dpmeyer4867]

Nice

[@thecarpenter1979]

Great video. I like the lack of annoying animations and crappy music. Definately enjoy the music you're listening to. Who you listening to lately?

[@JohnBuildsIt]

I’m pretty much just always listening to podcasts while working

[@EricStrobel09]

Looks great brotha! What miter guage is that for your table saw

[@JohnBuildsIt]

It’s the JessEm

[@rickfarris5071]

Hi John, I have the same saw as yours, can you give me details how you relocated the support legs to make room for the cabinet? I purchased your plan recently, thanks......

[@JohnBuildsIt]

Just unbolted and moved them all the way to the right. To reattach I just screwed them into the wood frame of the wing

[@Erickingarthur]

Great video John. I bought the plans and have the same saw. My one question is how you moved the extension wing legs? Did you pull the front rail off and re-drill the holes for the bracket? Thanks

[@JohnBuildsIt]

I used the ball end hex that came with the saw to loosen that bolt without needing to remove the rail. To reattach all I’ve done so far is just screw it into the wood top from the inside

[@Erickingarthur]

Great. Thanks for the info.

[@RaptureResins]

Great vid and considering buying the plans. Question...do you have any discomfort using the saw in just the industrial base? It's much lower than my Ridgid (just got the 36" sawstop). So if I'm able to raise my sawstop by 1.5" between the base and bottom of the saw...A) think that's a secure idea? And B) will that change the plans for me specifically?

[@JohnBuildsIt]

I’ve grown to like the height, comfortable to use! I have seen guys raise theirs like you’re saying though, shouldn’t be a problem 👍🏽

[@edwinpagan1290]

Excelent Vídeo

[@jasonplugowsky3086]

Could you tell us what tool you were using to trim the WIDTH of the edge banding? I think you forgot to list that. I've never seen one but it looks way quicker than a flush bit.

[@JohnBuildsIt]

Called the Band-it edge trimmer. Couldn’t find it on Amazon. I got it at Menards

[@jasonplugowsky3086]

@@JohnBuildsIt Appreciate your time!

[@jonruba4065]

Yes. Video on crosscut sled

[@williamkennedy1149]

Yes on the sled. Maybe not fast forward so much

[@taylorwebster1990]

How did you get the legs of your Sawstop moved out that far? I don’t have any more mounting holes to be able to move as far over as your did.

[@JohnBuildsIt]

To reattach I just screwed it into the wood wing on the inside

[@stevetimmons1284]

What brand/model is the fence and accessories on your table saw?

[@JohnBuildsIt]

That’s the stock fence that comes with the saw. All the other accessories are linked in the video description 👍🏽

[@jcarlin]

How did you move the table saw legs? Looks like you’d have two drill new holes in the steel and maybe even countersink them for really huge pan head hex bolts?

[@JohnBuildsIt]

The same way it’s attached in the factory spot

[@jcarlin]

@@JohnBuildsIt Maybe your wing has some holes mine is missing…

[@JohnBuildsIt]

@@jcarlin no sorry I drilled a new hole on the front! Really don’t have to though. Just fastening it into the wood on the wing would be plenty

[@jcarlin]

@@JohnBuildsIt Did you remove the fence rail to drill the new holes?

[@JohnBuildsIt]

@@jcarlin no just went down in the space between the square tube and the angle iron

[@offairhead]

❤

[@kevinthomson6324]

If I build this then where am I supposed to kick my vacuum, extra hoses, extension cords, cardboard boxes and what ever other crap that was in my way and I kicked under there. This is on my project want to do list with the boom arm for my dust hose and a French cleat wall. Someday I’ll get to it.

[@JohnBuildsIt]

😂😂I hear that

[@aircrow50]

Show the new cross-slide build.

[@JohnBuildsIt]

I’ll plan on it 👍🏽

[@chuckgrumble5440]

sad thing is it is cheaper to get packout boxes than buy the wood and slides (

[@JohnBuildsIt]

Haha probably!

[@CRISTI-NA]

why is the bottom of the drawer slimer? 🤔

[@JohnBuildsIt]

Any thicker is unnecessary and using up more of the drawer space

[@balazslakatos9817]

nail, glue and screw. that cabinet will survive a nuclear war.

[@JohnBuildsIt]

💪🏽💪🏽