Making CNC Clamps with Vectric Vcarve

  Рет қаралды 13,522

John Clothier

John Clothier

Күн бұрын

Пікірлер: 40
@rcairtechuk5695
@rcairtechuk5695 11 ай бұрын
Ive watched the video twice so i dont make the same mistakes but boy are you good with your audio clear speaking is a must and you nailed it what i did by learning from you was to but a level down and level the milling bit brilliant
@JohnClothier
@JohnClothier 11 ай бұрын
Thank you. Glad it was useful
@miriamjanssen8584
@miriamjanssen8584 Жыл бұрын
Very useful video, thanks John! You’re walking through the whole process makes it even more useful!
@JohnClothier
@JohnClothier Жыл бұрын
Thankyou
@jeytex3161
@jeytex3161 3 жыл бұрын
Nice system you are putting together! Plenty of flex and easy/fast to change. John, Thanks for walking us thru it.
@JohnClothier
@JohnClothier 3 жыл бұрын
My pleasure!!
@hanspijpers2100
@hanspijpers2100 8 ай бұрын
With those copper pipe, you can also use cam clamps, they work a lot faster. look for Marius Hornberger, Kind regards Hans
@JohnClothier
@JohnClothier 8 ай бұрын
Thanks for the tip!
@mattivirta
@mattivirta 6 ай бұрын
good video, i just today has made Vcarve same clamps. but im newbie not has used manytime carve i make little more time different drawing, i learn use vcarve.
@kevinwillis6707
@kevinwillis6707 2 жыл бұрын
word of advice john, dont automatically trust that a quarter inch endmill is really quarter inch, especially when using cheaper bits bought online, its not that important on some jobs, but as an example, when making a box on my cnc my lid wouldnt fit properly, using calipers i realised the endmill was nearly a millimetre out from what was specified. you can always enter the true diameter as a new tool in the vectric database. i find hardwood wedges are good for workholding up against fences on the spoilboard.
@JohnClothier
@JohnClothier 2 жыл бұрын
Thanks for the tip. I measured all my endmills before putting them in vcarve. Most are about right. Some cheaper ones weren’t though
@UnquendorGuitars
@UnquendorGuitars 3 жыл бұрын
Nice video once again John.
@JohnClothier
@JohnClothier 3 жыл бұрын
Thank you!
@AndyJenkins999
@AndyJenkins999 3 жыл бұрын
Clever. Assume you could also bolt a clamp through the copper pipe support to raise it up as well. Good video cheers
@JohnClothier
@JohnClothier 3 жыл бұрын
Thanks! Absolutely you could
@Metalbass10000
@Metalbass10000 3 жыл бұрын
No link in the description to Vectric V-Carve? I've never run across that software before, and I'm curious to see what it's all about. I've been either running, setting up, troubleshooting, doing prove-out of a process on, programming, process engineering for, and most recently managing the manufacturing process engineering staff who, among other things, programs, CNC vertical and horizontal mills, vertical and horizontal lathes, grinders, sinker and wire EDM, for about 14 years, usually having access to one of the seven CAM software packages I've worked with, either in school or on the job professionally. Most commonly I've used Mastercam, and often had access to SolidWorks for the CAD, or design, component of things. However, now I am process engineering, and programming, for my own CNC vertical mill in my own shop, and I'm searching for the best, most versatile, CAD/CAM software, at the lowest possible cost, because our very young business has extraordinarily tight budgetary limits.
@JohnClothier
@JohnClothier 3 жыл бұрын
It’s a pretty common program amongst hobbyists. Possibly not for you if you are used to solid works though. It’s not that kind of app. You can find it at www.vectric.com
@articandy
@articandy 3 жыл бұрын
Hi John great video as always can you tell me what the threaded insert dimensions are pls?
@JohnClothier
@JohnClothier 3 жыл бұрын
Thank you! Here is a link to them HSeaMall 50PCS M6 Zinc Alloy Hex Socket Screw-in Nuts Threaded Insert Nuts for Wood Furniture www.amazon.co.uk/dp/B07DDDLBMQ/ref=cm_sw_r_cp_api_glt_fabc_CYFRK7GPM6R0TBPF1GXJ?_encoding=UTF8&psc=1
@flypic1098
@flypic1098 2 жыл бұрын
Hoping to make my spoil board soon so some useful ideas there for me to think about. Just bought a puppy so don't know when I'll get chance. 🤔 + Thanks. Jim
@JohnClothier
@JohnClothier 2 жыл бұрын
Glad you found it useful
@PeterWa666
@PeterWa666 3 жыл бұрын
That threaded insert will do most of the time, but the forces acting on it with thick stock is pushing it outwards. Putting it in from the other side would make it a bit stronger, maybe not useful in real life but correct in theory... ;-) Nice video!
@JohnClothier
@JohnClothier 3 жыл бұрын
Thanks. Yes you could well be right there!
@flypic1098
@flypic1098 2 жыл бұрын
@@JohnClothier Looking at the video it looks like some one side and some the other.
@TheJonkilleen
@TheJonkilleen 3 жыл бұрын
Another great video John. I'll definitely be making myself some clamps using this or a similar method. Had you thought about using apposing wedges to work with the clamps fixed into your dog holes (the 3 and 4 hole pieces you made first)? I made an MFT style top for track saw work and picked up a set of dogs and wedges which do a great job of keeping things flat and tight to the bench. Thanks for taking the time to share your experience with the WorkBee CNC and Vectric software.
@JohnClothier
@JohnClothier 3 жыл бұрын
Thanks Jon. I have looked at the wedge idea but I never felt it was secure enough. May need to go back and look at that again. Thanks for letting me know
@TheJonkilleen
@TheJonkilleen 3 жыл бұрын
@@JohnClothier I bought a set from Axminster including a cam for tightening the wedges. I will make my own when i get my Workbee set up.
@JohnClothier
@JohnClothier 3 жыл бұрын
@@TheJonkilleen oooh I didn’t know they sold them. Might have to look at those.
@douglaslopes1987
@douglaslopes1987 3 жыл бұрын
Hi John, not sure if you're still seeing this but here it goes. How accurate is your workbee for drilling holes? I just got mine assembled thanks to your videos and the manual. But when I tried to get some 20mm holes in my spoilboard, they ended up being about 19,75 with some wee variations. But in general around 19,75. Just wanted to check with you on your experience. Thanks
@JohnClothier
@JohnClothier 3 жыл бұрын
Have you calibrated it? Out the box I found mine was a little out but after calibrating I can cut 100mm square and it come out within 0.25mm
@douglaslopes1987
@douglaslopes1987 3 жыл бұрын
@@JohnClothier haha I didn't even know this was possible until yesterday when ooznest replied saying the same lol. I only had 10 minutes available yesterday and I found that I had forgotten to align the Y carriages and one was some millimeters out. Then I tested again and it was already a huge difference. Still need to calibrate it properly though. Thanks for replying John. Can't wait to watch the other videos on the guitar and other projects. You were better than ooznest manual. Should have your videos linked in their website.
@JohnClothier
@JohnClothier 3 жыл бұрын
@@douglaslopes1987 glad you got it sorted mate.
@i679n5
@i679n5 10 ай бұрын
Depending if you do conventional or climb cut you will get smaller or larger holes. Cutter will go in or out of material. Makes small difference.
@LG-ro5le
@LG-ro5le 3 жыл бұрын
my workbee did the cutting out ok, but missed out the steps part for some reason, had to delete the main toolpath for the clamp, save the g code for just the 6mm and 12mm steps, re uploaded the job and it just did both 12mm
@JohnClothier
@JohnClothier 3 жыл бұрын
Glad you got it sorted
@Chriswoodworker
@Chriswoodworker 3 жыл бұрын
Great video, but you do a lot of tutting?
@JohnClothier
@JohnClothier 2 жыл бұрын
Thanks. Yes I do
@ItsSamyBassam
@ItsSamyBassam 10 ай бұрын
can i have your metric tool data base please
@alanmullock381
@alanmullock381 3 жыл бұрын
Wife gave me a new mobile, stumped!😣😂😂😂
@JohnClothier
@JohnClothier 3 жыл бұрын
Lol oh Alan
How To Make Clamps For Your CNC Router, Easy CNC Router Projects
34:20
5 Things You Need To Get Perfect V Carves
8:28
Chris Powell
Рет қаралды 24 М.
БУ, ИСПУГАЛСЯ?? #shorts
00:22
Паша Осадчий
Рет қаралды 2,6 МЛН
When u fight over the armrest
00:41
Adam W
Рет қаралды 27 МЛН
A QUICK to use Clamping System for CNC T-tracks
13:14
Marius Hornberger
Рет қаралды 79 М.
How to Make a Work Holding CNC Wasteboard | ToolsToday
9:38
ToolsToday
Рет қаралды 99 М.
Cam Clamps - with Added Functionality
9:20
Prosper Woodworks
Рет қаралды 29 М.
Sign Making 101- Tips for Wood Signs: Material, Finish, and Bit Selection
34:50
How To Create A Fence For Your CNC Wasteboard // CNC Woodworking
16:22
Myers Woodshop (Ben Myers)
Рет қаралды 116 М.
Basic VCarve design - Spoil Board Grid and Squaring Jig
10:35
Matt Made It
Рет қаралды 22 М.
How to Make a CNC Spoilerboard
21:29
John Clothier
Рет қаралды 24 М.
Making eccentric clamps for CNC table
5:24
mtmwood
Рет қаралды 123 М.
Cnc work Holding
19:22
Byrom’s Custom Wood Works
Рет қаралды 15 М.
БУ, ИСПУГАЛСЯ?? #shorts
00:22
Паша Осадчий
Рет қаралды 2,6 МЛН