Trailer Dolly -- Part 1 of 2

[@lenniecapuano521]

i made one of these to help move caravan in 1988 it helped a lot.WELL DONE SIR

[@barryseaton3121]

Its a treat to watch you as a highly practiced and skilled engineer.

[@migueljose8551]

Muy buen trabajo, Como se llama el aparato que usas para soldar?

[@JohnHarmon]

Miller 251

[@daveyJ213]

Yeah - I have all of that equipment right in my bedroom closet. Good grief. Thanks for posting though. Loved how you welded the axlw right to the table instead of using a vice. Skillful work.

[@rottiejakeluke]

Purchasing info for the step drills, I only see them for wood or plastic but not for High Speed type of steel drilling. Thanks oh, if you could build and send as a kit, I could purchase wheels locally if you tell me the details for the wheels needed. This would allow for easier shipping. Thanks once more.

[@JohnHarmon]

I used no-flat tires, but they are too squishy. I would just go with some regular tubeless tires

[@speedjames853]

Buen trabajo, de cuantas pulgadas con las ruedas? Gracias amigo

[@joewoodchuck3824]

I use my hand truck with either a trailer ball or even a piece of lumber to fit the trailer socket C clamped on as a kind trailer to hand truck of adapter. When I'm done moving the trailer, I take the adapter off and I have my usual hand truck again.

[@valentin.saniuta.po-derevenski]

Молодой мастер!

[@rottiejakeluke]

What was the wheel you used to grind off the spot welds? Do you have a link for it? Would you consider making another dolly for sale? Thanks

[@JohnHarmon]

Walter flap disc. I don't have a link. I buy them a box at a time and look for the best deal I can find on the web.

[@rottiejakeluke]

@@JohnHarmon what grit? Thanks

[@kuhrd]

+John Harmon - Cold Creek Works Not sure what your editing workflow and software settings look like but if you are having issues with audio sync, try running your exported camera video through handbrake keeping the format and settings the same except for checking constant bit-rate rather than variable bit-rate before importing the video into your editing software and see if that fixes your audio sync issues. I know that I have to do that for some of my cameras that don't allow me to change record settings. If this works and you have then identified the issue you can try changing the file format the camera is recording in and see if another format records in constant bit-rate or just add handbrake as an extra step in the workflow since handbrake can be automated to some extent.

[@JohnHarmon]

+kuhrd I need to try it through handbrake first. I have thought about it but haven't tried it. I just record things from my cel phone... that is the only camera I have. I don't have any real options for adjusting the record settings. If I export the video in 44100 Hz then things usually play pretty nice, but it isn't perfect. Maybe my next set I can try passing them through handbrake first.

[@kuhrd]

+John Harmon - Cold Creek Works Can't hurt to give it a try. Handbrake can also give you some extra options to export in formats that may be easier to edit in if you happen to be editing your video on a computer later on. It all depends on your video workflow and software as to what your best option is. I typically use either Adobe Premiere or Sony Vegas depending on how much editing I need to do to the video. Good luck and keep up the great videos!

[@aurelianorodriguez2890]

kuhrd inventos caseros sobre reparación escaldado

[@balixaantonio7540]

@@JohnHarmon A larme

[@dony.9014]

I never really saw the end result?

[@JohnHarmon]

kzbin.info/www/bejne/mXawoGl5eNprqKM

[@saykimbuk5863]

hi. sir i like your video, u are very creatives, n make thinks very easy to operate.

[@JesseMcFie]

How did you drill the holes for the cotter keys in the axle?

[@JohnHarmon]

If you place two pieces of angle iron together so it forms a ^^ and place it in the middle, that will hold it for you. You then give yourself a start mark with a punch. After that I start drilling the hole with a center drill, and then switch to a regular drill bit after I have a significant start.

[@JesseMcFie]

John Harmon - Cold Creek Works That makes since and helps. Thank You! You're videos are inspiring and enjoyed.

[@adrianjimenez826]

what size is the tube

[@PauloFerreira-sk7vh]

Hello good evening how are you? I really liked your video, and one thing caught my eye! Your welding machine. What kind of machine is this? I would like to buy an equal because this makes a weld bead very well done and has the right distance of contact with the material to be welded. Thank you.

[@jeleelhlfy2614]

Paulo Ferreira very good

[@MisterDivineAdVenture]

very impressed by the simple work setup and how effective ya'll are!

[@JWB671]

Awesome job. What type of grinding wheel is that?

[@JohnHarmon]

+JWB671 Walter Enduro Flex flap discs. They are awesome.

[@JWB671]

+John Harmon - Cold Creek Works thanks!

[@richardlamoureux3630]

do you sell these?

[@checker7520]

Nice video! In kindness, you should position the handle of the vice against the column when drilling. It's safer for preventing spinning of your work piece should the bit bind. Beautiful work!

[@Monsteracustic]

você está de parabéns , trabalha muito bem e com um bom acabamento de peças ,e muito bom ter ferramentas apropriadas para o trabalho 👍

[@JohnHarmon]

Thank you

[@davidvillalva3322]

Friend pls .. what is the name of the tool that you use to point in the 5:02 minute

[@JohnHarmon]

Automatic Center Punch

[@fernandocastillo1035]

hola me encanto y un carro para bicicleta tenes video?

[@faitron2]

Are you using a MIG or TIG welder?

[@JohnHarmon]

MIG

[@faitron2]

Thank you and nice project!

[@brycedale1712]

I think it might be an arc welder bro

[@karolthiesen4707]

I love the work with your cnc plasma. I want to get a cnc for my everlast plasma cutter. Cool stuff.

[@dananelson3534]

You make it easy John. Thanks for posting.

[@JohnHarmon]

+Dana Nelson Thank you

[@عبددالقادرهادي]

@@JohnHarmon Dear what is a best mig welding or tig welding thank you regard

[@Marockss]

I'm curious. What is the name of this equipment you use to cut the sheet metal?

[@JohnHarmon]

Torchmate 2x4 CNC machine connected to a Hypertherm powermax 1250 plasma cutter

[@Marockss]

John Harmon - Cold Creek Works Thank you for listening, my friend. And congratulations on the quality of your content. Really is quite rich.

[@JohnHarmon]

you are welcome, and thank you too

[@johankoekemoer9155]

Marcos Rocha A plasma cutter.

[@mariflores862]

Wow you are amazing , all those heavy duty interesting tools !!!! you must love what you do !!! thank you for such incredible video !!

[@tropicalfete]

can i buy one where it is control by the handle

[@fxstsjjc]

can you give length of square tube holding axle and receiver

[@Wolf217666]

В руках мастера дело идёт! Приятно смотреть..

[@infotechJack]

Whatbis wheel size?

[@alexpowers3697]

Still fascinated by the "weld my part to the table" trick.

[@seanbinyamin]

Hey, amazing video I watched it many times I wanted to ask you how to call the small gold-colored device that you are marking a small hole in the iron with a click before the drill you can see that on 5:05 on the video thanks!

[@JohnHarmon]

Spring loaded center punch

[@hugosantizo3866]

Sean Binyamin its call step drill

[@REVNUMANEWBERN]

They can be bought @ Harbor Freight,www.harborfreight.com/3-piece-titanium-nitride-coated-high-speed-steel-step-drills-91616.html

[@oldowl4290]

@@JohnHarmon John could you maybe please list the parts you are using in the description for your trailer dolly. Im going to build one of these with some 2.5” / .25 wall scrap tube I just got. I have a 20” piece for the main horizontal tube and wonder if that will be ok with 10” harbor freight wheels. So that will give an approximate 24” wheelbase. Are you using 10” or 13” wheels? Anyway, basic info would help me greatly. Thank you!

[@Markie-eg9ez]

Do you make stuff for Batman???

[@darrenehmke]

You noticed the batman throwing star as well?

[@ThakurVinayDadwal]

Angle grinder stand you should make for yourself

[@JohnHarmon]

I have 3 videos on that very thing. Check out the videos on my channel.

[@suenergy]

Great work and illustration! Thank you!

[@sugandairawan844]

Terimakasih atas ilmu teori yang bermanfaat untuk kita semua .Aamiin...

[@OppoOppo-nz5bp]

สั่งทำได้ไหมครับ

[@JohnHarmon]

Harbor Freight and Northern Tools offer something similar cheaper than I can make it

[@CanalSHAWBE]

Excelente trabalho 👍👍

[@perfectocabrera8848]

Gracias maestro me diste una buena idea saludos

[@matthewkral6151]

You able to tell me what size tubing you used?

[@JohnHarmon]

1.25" square tubing @ 14 gauge. The part with the wheels was 2x2 tubing, probably 1/4" thick (or maybe 1/8")

[@cristalgerman1795]

alguien me puede decir adónde consigo la cortadora de placa con la que izó el círculo y el cuadro

[@rungjaroensreetonrath5091]

อยากได้เครื่องเชื่อมแบบนี้

[@rick62465]

you should make a magnet around the edge of your workbench instead of welding your stuf to the side

[@АннаВасильева-х7л]

Чужими руками все просто,молодец 5+

[@regisgregory]

Boa noite! Qual o nome da música no final do vídeo? Obrigado

[@JohnHarmon]

Crimson Fly. It is free from youtube as one of their tracks.

[@CanalSHAWBE]

Bom trabalho

[@lemilemi5385]

So gifted

[@RuiCunha68]

tools, skills and generosity

[@ernest-77]

Very good 💪👍 Gold hands! Hello from Ukraine.

[@sergeysergeev3619]

приятно смотреть как работает мастер!

[@JohnHarmon]

You are kind. Thank you.

[@frankphipps]

Wow, your a very smart man, inspiring

[@henryecheverria239]

Gracias Buen trabajo

[@JohnHarmon]

Thank you

[@jjsd250]

what size tires did you use?

[@JohnHarmon]

I don't remember... just whatever non-flat tire harbor freight sales... I wouldn't use nonflat tires again though

[@universal5839]

А тисков специально у него нет?

[@JohnHarmon]

I am not sure I understand.... google translate didn't seem to translate that very well.

[@danielvieira4519]

Parabéns, ideia genial, excelente!

[@rubenfelix6862]

Nice and quick no bullshit nice job

[@ЕвгенийЯнковский-ж7л]

Отличная работа

[@JohnHarmon]

Thank you

[@moisesgarcia267]

Wao! I want to make a bagon and I got an idea from your video...thanks for the information..

[@MustangsTrainsMowers]

I got a free one on a pizza delivery about two years ago.

[@budgillett9535]

Why 642 negatives? I don’t agree.

[@daniellandivar499]

Bud Guille

[@marcioleandrodecarvalhobar6662]

Belo trabalho! Parabéns!

[@martincortezortiz9064]

Thanks for sharing. Great idea.

[@mariepi]

Es más sencillo comprarlo directamente en eBay

[@JohnHarmon]

What fun is that?

[@ignatioshandmadewoodworksi3702]

Very cool!!!!

[@erdemkurt5982]

Pahalılık insanları mucit yapıyor akıllı. Çalışkan insanları seviyor teşekkür ler

[@mixacoi1866]

Если есть под рукой инструмент какой пожелаешь, можно и самолёт смастерить, а если дрель, топор и молоток....

[@Chris-lz7sx]

It costs cheaper to buy one.

[@JohnHarmon]

Not when you make money on the build video from youtube.

[@australiawilliam3326]

Hi,great clip,got a few tips,thank you.

[@tavr8208]

Хорошо получилось!

[@РустамЕнгалычев]

Здорово придумал!

[@JohnHarmon]

Thank you

[@ambiorixmedina3552]

eres un genio

[@alejandrosalazar2617]

Era para tirar de las mescldoras y compresores

[@miltosvitouladitis2605]

Good work!!!

[@ronaldwprovo6111]

Good work.

[@oficina3erodaschoppers828]

Parabéns, ficou show jhow.

[@cleuberalvesbarbosa6038]

Deus abençoe pelo a sabedoria

[@oldyoung9379]

Interessant.

[@김재선-b5f]

아주 잘하십니다. Good work.(*.*)

[@JohnHarmon]

Thank you. I lived in Korea for a couple of years as a missionary (1995-1996). Mostly in Seoul, but some time in Incheon and Ansung

[@leonardorangel1247]

Impresionante¡¡¡¡ Gracias

[@alejandrosalazar2617]

Yo fabrique uno parecido a ese pero usaba ganchos

[@jamesymiff7699]

First class

[@JohnHarmon]

Thank you

[@ronsbeerreviewstools4361]

good job.

[@klausbenner9343]

eine sehr gute idee

[@romeobernardo3499]

great idea.......weweet..

[@emilianozempoaltecaaguilar3873]

Cómo consejo desperdisia mucha roska

[@ААлексс]

Привет! Все хорошо,гуд!

[@joselmoalmeidadossantos.6441]

👏👏👏👏👏👏👍👍👍👍👍👍......... Brasil.

[@robertbutler8004]

Gee he would be good to employ on an hourly rate Lol

[@noname4768]

ROBERT BUTLER iLlkl

[@pino6061]

You are so perfect.

[@johnnycop77]

Benny Hill theme needed.

[@عبدالجبارتوتي-خ9غ]

لو كانت عندي اجهزته🤔

[@JohnHarmon]

You can do it without this equipment, it will just take longer

[@عبدالجبارتوتي-خ9غ]

لا عندما قلت اجهزة أي ابسط الأجهزة ولمواد الاولية غير موجودة

[@АкылбекМурзаев]

👍👍👍👍

[@glenking3337]

I took and put a ball on top of my snow blower. That way I have a powered trailer dolly.

[@Andre-luis-santos]

muito legal.

[@Zaza769]

Классная штука

[@JohnHarmon]

thanks!

[@EPICCOLL25]

WOW.

[@lydiaorque3000]

Paraggis

[@nikolaivasilev5969]

oliva madrid

[@phuonglinhnguyenthi7322]

oliva madrid o ke

[@phuonglinhnguyenthi7322]

Cach che tao may OKe HAy QUA

[@arleylasso4727]

Q..BUENOS INVENTOS

[@stevieross1402]

Dude, slow down!!!.......you're gonna hurt yourself!!

[@karlodonovan4915]

nice