Try This on Your Workbench

[@CelestialPopCollectiveOfficial]

Hahaha I’m here for the thumbnail. In the work bench I built 5 years ago, I created a waste hole with a fitted lid with a finger hole. The size perfectly fit a coffee can underneath to catch anything I push into the hole. If I remove the can, the garbage can lives directly underneath so it’s a quick sweep into the trash, if needed.

[@packerbacker9109]

It’s nice to see a non tik tok build and back to the reason why I subbed to this channel in the first place. Let’s gooooo

[@chrisferguson1911]

AMEN!

[@MarcFittante]

Totally agree. I was wondering why he’s not at a million subs then I remembered tick Tok

[@michaelwillson6847]

End the year reckon he'll be at mil

[@ShaneChristopher]

I agree!! I love shop infrastructure builds

[@toastedfoolery7137]

dude thank you. i thought i was the only one to notice the "low effort" videos. not to cast shade on john but the videos that made this channel great are becoming more and more rare. dont let the algorithm dictate your content

[@ScottRoth1986]

These are the kinds of videos that got me hooked, not the TikTok stuff. This was great and please consider making more!

[@John_Malecki]

glad you like it scott. Thanks

[@ShopNation]

That little offcut waste hole is a great idea!

[@maddogshwa]

Lap joins are surprisingly easy to do. They are strong AF and make assembly easy.

[@thomasfloyd6714]

Truly like practical well built things more than anything else

[@bgpappy30]

Thank you John for sharing your story and build’s with us all! It’s great and when I get a shop, I will build this. Thank you. ONE LOVE TO ALL!

[@brianhall9019]

Nice table. Thanks for bringing us along on the build. Suggestion. Put a few magnets on the bottom of the trash bin cutout and on the front of the pullout bin so that lid doesn’t get lost or in the way when working. 😊

[@John_Malecki]

I weirdly did that the next day!

[@brianhall9019]

Really, magnet to the bin. Dang, we smart fellas!

[@Sunkencitydesigns]

Please more video like this!! This was epic!

[@josecanyousee56]

Great now his head will get even bigger. Way to go.

[@fraserjoyes5972]

First time I’ve watched the whole video in a long time! Back to the woodworking I subscribed for!

[@somebodyandthem]

The TikTok build videos are so much better same with the pallet videos

[@alfanazzamcraft]

Wow amazing method and equipment, greetings from Indonesia, ✋👍🙏♥️

[@Otlwoodworks]

Working in my garage and wa t to build a larger shop! Thanks fir the guidance and motivation

[@jasonhajek1581]

This is the 2nd video of yours I have watched!! I am now subscribed! You are the type of guy I would like to lean up against that new bench and have a beer with!

[@FeelingLikeThatNow]

In my experience, the chisel point on a brad nail can and does tend to cause any deflection out of the wood to go perpendicular, or 90 degrees to the orientation of the nailer, so I in fact hold it the other way to the how you suggested, so I can hopefully avoid a nail deflecting sideways out of trim and casing. All it takes is a small bend in the nail and it will steer itself very quickly in a different direction, and if the nail curls up somehow it can even come out the front and sometimes even back into the material. I say from experience, safety is important, and a good rule is to never have your hand in front of the nailer, however a deflection can send a nail back towards you as well, so ALWAYS wear safety glasses. My two cents.

[@matthewmangold5144]

Came here to say this same thing! I'd rather just move my hand out of the way and risk a blow out at the top of the panel rather than put the sides.

[@bmedicky]

The mindset that works for me is to ask myself: how would I hold the nail gun if it were a pneumatic stapler instead? Staples usually only make sense in one orientation. That orientation is also the one that works best for brads.

[@baraksinz]

Agree! John has it backwards.

[@JaredSVX]

12:25 I wish I had known this a couple of weeks ago! I was using a nail gun for the first time, and my nails kept deflecting out of the side of the wood...now it makes sense!

[@adgieem1]

Love your shop. The Steeler logo is my favorite item in your shop. 😉

[@ScottStephenSmith]

This video was a great return to a vibe so many of us love.

[@kennethbezanson4266]

Using a clamp to pull those wedges in seems like a beautiful solution. No need to pound them in which might shift everything else too 😎

[@ElaineHarper-k8o]

Good to see you making something unique again. Love it. Nice work, I appreciate the build videos..

[@bmac1629]

The flipping of the laminate sheet was pretty scary, as someone who works with that material fairly regularly. As you found out its quite sharp...a cracked edge like that will function the same as a razor blade against your skin. Those sheets only bend in 1 direction at a time, so if youre flipping it either roll it over on itself on a bench... or hang it vertically first between 2 people then turn.

[@John_Malecki]

Yep we learned that one the hard way!

[@mattb.2359]

I work with this material once in a while, and we use at least 3 people when cutting a fresh 4x8 sheet. But, yes, it really only likes to bend in one direction at a time.

[@bmac1629]

@@mattb.2359 I can cut a 5x12 sheet by myself on a table saw using an out feed table to catch both sides of the cut, but its definitely a bit tricky at first. Having long arms to reach up the long sides of the sheet while you are standing at one of the short ends helps. Curling it into a gentle curve along the short side makes it fairly stiff, and you just ease up the tension as you pass through the saw so its basically flat by the time youre close to being finished cutting it.

[@jaceschmidt8304]

0pp😊😊😊😊

[@zak8292]

I’m so glad I found your channel. I came across one of your videos while watching a I Like To Build Stuff vid, and it looked interesting. I want to say it was your “30 minutes in Ace Hardware” competition video. I immediately vibed with your humor and honesty towards the projects. I’ve since been playing catch up trying to watch all of your projects because they just look so dang fun and eye-catching. Not to mention your generosity and humility is refreshing. Love the channel! Keep it up.

[@stephenbevitt4202]

The offcut bin idea is brilliant. I'm cutting that into my workbench as soon as I get back to her. Greetings from Sydney Australia

[@adamcolvin2742]

Good to see you making something unique again. Love it

[@sethpittman2362]

This was a big win to see! Loved this video. PSA: Laminate is as sharp as a razor blade. I've never been cur worse than by melamine/sheets of laminate

[@Moondog-wc4vm]

Same. I've cut my fingers with razor blades and scalpels (art and craft in school in the 80's for the razors and modelling with the scalpels) Cutting myself with laminate while doing DIY work at home for my family was just as bad. One day while building and laminating a desk I caught a finger with a saw, and it's neighbour with the edge of the laminate. The edging was definitely worse. Still not as painful and irritating as a paper cut though 😉

[@JohnT2001]

I work with laminate a lot. Cutting them is best on some form of table saw or dimension saw. As for sticking them spray glue out of the canisters with a proper hose and gun is the easiest way. You need a face a a backer on panels though in order to prevent long term warping

[@jimblack6733]

Nice build! Let’s build some more!!!!!

[@Hvn1957]

Great video. 😂 I remember my first laminate counter top. I cut an L thinking it would be less work after gluing. As soon as I picked it up, it tore right in the crook of the L. Lesson learned early.

[@HighSchoolDropout96]

Thanks for the tip about the bradnailer was always wondering why it seems to go to the right or left and coming through the wood

[@bobpickcrafter3361]

This is my first time watching your videos bro and I love it!!!! Not only that I noticed on the wall there is Steelers 😊😊😊

[@robertapreston4200]

Very nice.... wish I had a shop space available so I could build this table.

[@jonpaul5255]

Nice work, I appreciate the build videos.

[@elliottanderson9507]

I am a fan of drawing exposed center lines for hidden wood so that later if needed you can always nail or screw without missing the "stud"

[@erikhoglund666]

Perfect Sunday, thanks for the video! 🎉

[@stevedimond267]

A river table with actual water and real fish. Love the content.

[@MCsCreations]

Brilliant design, John! Fantastic work! 😃 Stay safe there with your family! 🖖😊

[@josep1538]

I just bought a 4x8 x 3/4 piece of ply that already had a butchers block formica for $50 from a thrift store that I plan to make in to a work bench top.

[@Connorfitzy1438]

Love all the stuff you mack keep it up mate

[@trevhaydon5090]

Hey John, If memory serves me correctly, The chap you mentioned with the hole in his outfeed table is Timothy Wilmots, His content is like yours, must see. All the best and much respect from North London UK.

[@markduggan3451]

That looks amazing, I wish I had the room for it in my shed.

[@Lost1nTheSauce]

Glad to see a real build going down, was getting tired of the tic tok trends

[@paule5812]

Looking good John, you’re looking trim 💪🏼 keep up the hard work.

[@gdworkshop]

Great video fantastic build.

[@matthewboyd443]

This is the reason I subscribed, finally good vid!!!!

[@crossbowhunter9118]

That is so cool I so want a desk like that beats my ikea kitchen top desk I love the table top

[@TheMonsterGrunt]

Isthis Polla first appearance! I love him in his most recent videos he's been putting out.

[@WarriorKidd06]

Man I love woodworking projects like this. Looking forward to getting back in my garage and building again

[@kevinf3641]

Great build.

[@Aisaaax]

Build a river table with lights inside epoxy😊 Also another idea is to get a mosaic effect with epoxy. Poura sheet of colored epoxy, smash it to shards, do several colors then have a mosaic picture out of them. Pour some neutral epoxy to bind them andpolish. 😮 Also I loved your big projects before. Like Sam's backyard/overhang, your living room and kitchen, etc. Dunno if there's any opportunity to bring more of that in the future. 😮

[@Tensquaremetreworkshop]

Packouts in drawers (0:40)- so to get a component, you- open slider unlock lid lift lid get component close lid latch lid close slider Seven steps to get an item. Drawers do it in three. And have about double the storage density. Drawers- one item deep, no more. Your MFT (9:15)- those cutouts are meant to have large radius corners. You have massively reduced the strength by cutting too much out. Frames are not needed- the whole thing can be made of sheet. Just as strong, and more storage space. Cheaper, lighter, better... I could go on.

[@jimcooney9019]

great job thanks for sharing

[@gianmarcomaddalena3521]

As soon as I saw you flipping over the Formica I knew it was going to crack that stuff is real delicate and to cut it you could throw it on the table saw and i would also even file the edges after routing because sometimes they corner can still be very sharp

[@timlecompte8528]

Sunday night complete 🥰

[@ajs96350]

@1:25 what is that tool called? The one the router is riding on.

[@bradanselment]

That Montana dual bit is good. Nothing else from them is worth the package it comes in lol

[@hectorpizzani9796]

Awesome build!!! Love it

[@jimrosson6702]

Very cool new table came out great

[@coreyevans1979]

They make laminate snips. I do cabinets for a living. It takes 2” clips off, and stays true to your line and you can can run the whole cut without having the issue you may have with tin snips once you’re well into the cut.

[@stevenvanhasselt4693]

😮😮😮😮😢😮

[@MRBMORROW88]

What up John. John you should look at Panel Saws. I work a cabinet shop we build custom kitchen. We got a SVP 133 Plus Vertical Panel Saw. It is awesome. It makes really quick work cutting down ply wood.

[@jewdd1989]

Nice build! Love the scrap bin cut out, that’s a must and the dog holes seem to be making a comeback and I can see why

[@pilotdog68]

What's the advantage of dog holes?

[@jewdd1989]

For versatility, function, etc. I don’t have any yet but the accessories you can get for standard dog holes is expansive and makes a variety of jobs easier. For example you can use dog holes as a way to hold something you’re hand planing still and in place. If you’re screwing two parts together and need a square reference and support especially for pocket hole joinery

[@JackyKongD]

Really wish you guys were uploading every week again

[@derekether4957]

Please please tell me where you got your red hand drill press from please I know it was a long time ago when you used it but I would like to get one thanks you

[@ReadHumanAction]

where do I find that adjustable height base? Thing looks gnarly

[@RealAndySkibba]

Super cool build.

[@TheAgri_Lad]

This might seem stupid but, what is the advantage if a torsion box over having a solid top of say 2x4s?

[@Styles4life15]

Finally they actually building something! This is why most of us watched your videos to begin with!

[@jimlachance2181]

I’ve used the stuff fount a 1/8 or 1/4 inch round over but will make it not try to lift up or snag

[@overbuilts10]

I built custom commercial cabs and counters for years mostly medical cut laminate with table saw

[@LucarnAnderson]

Looks awesome!

[@markroper9269]

Love the video....cool ideas! Never seen plastic laminate rip like that formica.... ugh.

[@anthonysmith9410]

Thats a fantastic build….I need one, where are the plans?

[@gileadwright226]

With laminate it is way easier to use dowels when gluing it on and use a bunch of them so the laminate doesn't get stuck where you don't want and they come out easily or you can use an extension cord you don't care about, it works just as well as dowels but you will never get it clean. I have done both of those ways and it works awesome.

[@Pangchristian]

watched this video while working, and not looking at the video itself, 4:46, i thought i was watching someone else videos, and anxiously waiting for the "i know it doesn't look good right now, but watch..."

[@nonenoone7567]

Hey how about building one box that you can drop in a bunch of tools in like a drill press, router, circular saw, drum sander, and a jig saw and use in the same box

[@susanaagostode]

❤❤❤❤❤ I like the work u do

[@territ1231]

Like watching all you do.

[@NOLAfugee]

The bin reminds me of a flat top grill, especially hibachi for egg shells and such.

[@AshB911]

Using 2x10's did the wood twist/warp after time?

[@philgoodinc2]

Which safetly glasses are those? The link is for a gold pair, but you guys have the snazzy black ones.

[@SchysCraftCo.]

Very nice add on John. Hopefully you get great use out of it for many years to come my friend. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. Stay squirrely. God bless.

[@HumancityJunction]

What length pocked hole screws do you use with your 3/4" plywood? Any recommended brands of screws?

[@loumarra8280]

1.25”

[@HumancityJunction]

@@loumarra8280 Thanks

[@Miastrong930]

Build a fresh air shower with a spinner to wring out wet items. When you get one from the beach, lake, outdoor water activities. Rather than drag in mud, sand, etc. leave it outside. This is especially useful for kids, guests and pets when you get home and need to get rid of mud and sand. Since it is not sewage is drainage is less complicated depending on local ordinances. You will save on plumbing expenses. Sand is like concrete in a drain trap. This can be as simple as a box or a more complex spa. Best case would be a modular design with additional modules built over time.

[@RoysTimberArtTechniques-mv6gt]

I love great ideas I make wood spirit bird boxes something different ❤

[@502deth]

what was up with that square mark at 5:58???

[@ThePirateGod]

As someone who built kitchens and laminate counters. We cut the laminate on the table saw very carefully and used many more sticks while adhering. and would use a 22.5 router bit to get rid of the sharp edge flush cut was too sharp.

[@norcross26]

That's an awesome job.

[@BreakdownBoxes]

Watching that laminate tear in half gave me bad flashbacks of when I used to manage a cabinet shop. I've been cut open more times than I can remember by jagged laminate edges... seeing the blood later was not a surprise.

[@daviddrover-smith7217]

Love it John.

[@markisom78]

I built basically the same table with your old plans. Just a 3'x6' table with 1.75" maple butcher block. I also used the same Armour double T track as you did. The only thing I wished I would have changed was using dog holes instead of the T track. Because the T track, although it's top notch, has its limitations. Also I wished I would have planned for a wood vise. But I still love my table

[@pilotdog68]

Why dog holes instead of t-track? The ability to slide and place a hold down in many more positions along the track seems like a major advantage

[@markisom78]

Actually I did bore dog holes. Now I have the best of both worlds

[@emilyrln]

I was not ready for the Taken meme 😂😂😂😂😂 oh, jeez, now my face hurts 😅

[@markwhite8543]

On your round "Thash Hole" lid, glue a magnet to the bottom and screw a large washer to the side of the bench nearby. That way you have a quick easy place to store it when not in use. It can double as a pickup tool for any leftover fasteners after assembly.

[@TomsBackyardWorkshop]

I'm building a small workbench now. Not fancy but trying out new construction methods.

[@reagomyeggo]

Those laminate tops are tough to work with. one time I was doing a kitchen and it broke the same way that yours did. The back corner I had to piece together. very frustrating

[@crunchybones3899]

Thats a nice table 👌

[@Brian-mp2mv]

9:50, I want a cast steel table saw top with a router table combined

[@AMobOGobos]

The cutoff bin is a really cool idea, but every time you pull it out and push it back in it doesn't want to go flush without a little extra work. You could make a waxed skid that it rolls into, so that when it is going into the table the track squares the bin with the table on its own.

[@duralw.freeman195]

You can cut the laminate on your table saw also, a bevel edge is better to avoid cutting yourself or just file it.

[@parkeryoung2569]

why didn't you use the cnc to cut out your pieces for your torsion table?

[@maxclips3152]

John climbing up on the frame to test its load bearing capabilities is very much giving Big Z from surfs up bouncing on Cody's surfboard to make sure it will handle the waves

[@GatsbyParty]

" don't just slap something together because its the for the shop" lol. Thank god this isnt a just slap something together for another tiktok video. So nice to see a regular build. Im sure most of the viewers would agree. The tiktok and buying return tools or whatever videos just are not what we originally subscribed hoping to see. Just regular builds, regular wood working, and it's all good.

[@GearGuy907]

What pocket hole machine was that you used? Thing was fancy!