I Bought TikTok Shop Tools

I bought tools from TikTok Shop....
Join THE BUILDER BUNKER - link.johnmaleck...
- Become part of the #1 Community of people just like you who love tools and building and being awesome! Get access to behind the scenes videos, building tips, cooking, booze reviews, and more!
Grab Yourself a Pair of the BEST Safety Glasses on the Market!
bit.ly/ShopSha...
Fantik Screwdriver - geni.us/JM_Fan...
Fantik Laser Level - geni.us/JM_Fan...
Want to se more awesome videos?
I Bought As Seen on TV Tools - • I Bought As Seen on TV...
- I Bought A Pallet of Lowes Tool Returns for $697 - • I Bought A Pallet of L...
- I Bought A Pallet of Harbor Freight Returns for $1,223.41 - • I Bought A Pallet of H...
- I Bought A Pallet of HOME DEPOT RETURNS for CHEAP! - • I Bought A Pallet of H...
- I Bought A Pallet of HARBOR FREIGHT RETURNS For CHEAP... Scam? - • I Bought A Pallet of H...
- I Bought A Pallet Of ACE Hardware Returns for $1176.13 - • I Bought A Pallet Of A...
#unscrewed #JohnMalecki

[@thatDUDEfromMAINE]

"i threw away all my screwdrivers" proceeds to throw a single walmart made P2 in the trash

[@theglitch99]

That makes an appearance when the lady is using it!😂

[@ApacheLife-50]

My thoughts exactly. And the way he threw it in there on a clean paper towel is sus. He went back in 10 seconds later and pulled it out. lol

[@dantecoal7584]

That thing wasn't even a P2. That was a Walmart made P1.7543 driver meant to round out anything from a P1 to a P3 with as little effort as possible. If finer trash could be made, you'd be able to buy it at Walmart.

[@LatitudeSky]

​@@dantecoal7584That driver is great for making any screw into tamper-resistant. Because you aren't getting it out after that driver has chewed it up.

[@woodworkerroyer8497]

Beat me to it. That Stanley isn't the worst screwdriver I've ever used, but it's nowhere near something I'd buy today.

[@jeffomalley100]

The dude that won the level just finished building his house and is watching this like oh no lol.

[@s33ur3lv3lvly]

15:43 Sam realizes everything in the dudes house is off.

[@numenoriany2k]

@@s33ur3lv3lvlyplot twist its the tower of Pisa

[@Clowninyodreams]

lmao his whole house is just crooked 😭😂

[@pajolee6918]

The screwdriver set is for phones, tablets, laptops, etc. The pry tool for taking off phone screens, etc.

[@pileofstuff]

Yeah, It's intended for machine screws, not self tappers or wood screws.

[@stanimir4197]

@@pileofstuff well even small machine screws (m3 or 1/8") require around 1.3Nm torque, which is similar to driving decking screws in spruce.

[@EXTREMOZAU]

And many fine electonics scrows have a forme of loktide

[@Paul_SD]

But magnetic???

[@Gizmos_and_stuff]

@@Paul_SD whats the problem?

[@jameswarner5878]

I like how eveeyone is commenting that the screwdrivers are for electronics even though John says it in the video.

[@wanderer202]

It's not even good for that. I've tried them. The Fantikk S1 is the better choice than the E1 featured here, and it's still worth pointing out that the tiktok shills are still flatly lying about what it's capable of.

[@ct578]

They saw TikTok in the title and their attention spans disappeared

[@senatorsmiles]

I have one of those little fanttik screwdrivers at work... in IT. Works great for electronics as you suspect. When you've got to remove 15 little tiny screws from the bottom of a laptop, it's a lifesaver lol

[@PosiCat]

I got one as well for electronics, and yeah, they work great. Love how the gears mesh up so you can manually break loose super-tight screws, and then it takes it the rest of the way out, which is honestly the part that kills your wrist, unscrewing those 15 tiny little screws one after the other. Small screws you don't want super-high torque because it will strip out the screw socket. For woodworking screws, you definitely just want to chuck a bit in your drill, or something designed for a lot higher torque.

[@souptime4109]

The thing just obliterated screws my team used it on, the bits were junk compared to our iFixit kits.

[@christianlewis2131]

I work in IT had one of theses for 2 days let it charge forgot I had it and 2 weeks later wouldn't work I prefer the cheap electric screw driver from Walmart that hart brand it's cheap and honestly been using it almost everyday can do almost anything

[@Jabo2531]

@@souptime4109 the ifixit bits fit in the fanttik screwdriver. I use it all the time with ifixit bits

[@ToasterCrumz]

Yeah she definitely isn't made for installing cabinets 😂

[@caseyt8447]

OMFG the ultimate showdown reference at 14:46. You're my hero for that, oh my lord it's been sooooooo long since i've seen that video! I always thought there was more to Mr rogers then met the eye...

[@davidcheek8892]

Spudger. The metal paddle in the precision screwdriver kit is called a spudger. It's like a prybar that won't scratch plastic, glass or metal and is common in electronics repair. You wouldn't want a high powered precision screwdriver, you'd strip threads, so they're all pretty much 4v. The next step up would be a Vistar or Dewalt 8v screwdriver.

[@TheHatchetJack]

Thanks for the info but his ignorant self won’t like at this to learn

[@mvnd5652]

​@@TheHatchetJack it's not so much that he's ignorant as he just doesn't ever work on electronics. he said multiple times that "it's good for smaller things like electronics, but it wouldn't do well in a workshop". he's literally saying it's designed for precision work, but it doesn't work for much if any of his applications.

[@mikolajkrawiecki884]

Bruh, you can just set lower speed, push it more and have the 8v torque advantage on smaller screws. There's just no reason to buy electric screwdriver and have to manually loosen screws LOL

[@RockulaRandy]

Funny! I was yelling at my PC (I do that a LOT), when you were testing the levels, because you had them so far apart. Glad you heard me! 🤣🤣🤣

[@isaiah4216]

For the bits with the stars and other shapes, that is for electronics like laptops, printers, etc. I just replaced the battery on my laptop and had to use 3 different special bits to get into the battery compartment.

[@natearrigoni]

They still suck for that; I returned mine and got the bigger S1. It actually works for all my electronics projects, and I can drive screws in walls and most things I need around the house.

[@FlyboyHelosim]

All I have to do to remove my battery is slide a switch. LOL

[@JarodHarrower]

The stars and squares are also used throughout the automotive industry man

[@BayareaXotics]

I think the tiktok one has a chance of being a replica since many sellers source from China. I recommended not buying it from tiktok shop and buy it from somewhere reputable.

[@swan9491]

Yep. Same with he tweezers and pry bar thing. Use that for taking apart controllers or plastic snap together panels

[@g.e.fourie5672]

Would love to see you compare 10-in-1 type tools with single use tools and see if they are worth it.

[@Voicesofjake]

“Welcome to Costco, I love you.” Hahaha hats off to the editor 😂😂

[@christophermetz1550]

I bought one of those super cheap laser levels from Amazon just to try and make installing a shelving unit I was building in my house go a little faster. I was really impressed with how well it worked and how simple it was to use. I think I paid less than $30 for it. Worth every penny.

[@-Anzul-]

I got one for review in the Amazon Vine program, and it's a surprisingly well rounded level for the price-point.

[@bazilwreckerloughead]

@ 8:12 I think the movie was Gladiator.

[@tomahoks]

You think right.

[@Dream.of.Endless]

It is.

[@kiranfox8315]

Nah def from the joker

[@NickMueller-v9b]

The screwdriver at Costco is a much larger version. It looks like that’s probably the precision version for electronics and the one at Costco would maybe be closer to a traditional screwdriver replacement.

[@atarumoroboshi527]

Yup, it even says precision. The low torque is even on purpose to avoid damage the screw and whatever you're screwing and to force the user to break away screws on his own or give the final turn.

[@MMWoodworking]

Exactly. It looks just like an electric version of the kit I use to disassemble and clean/fix my computer. It's not really meant for shops. There is a reason that Red and Yellow sell more powerful versions for people actually needing it for repairing tools, cars, repair work in houses.

[@john-doe-r]

It would be better to not advertise them as *the only screwdriver you'll ever need*. Small precision work, low torq.

[@Elmospiece]

I use this one for RC stuff. Low torque is ideal in that situation.

[@coyster530]

​@@Elmospiecethat's honestly what I'm thinking of trying it for taking it in my bag when I go RC bashing

[@GryphonArmorer]

Cutest little thing ever. 🥰 🤪😂🤣 That little “screwdriver” is perfect for electronics, i.e. phone, laptop, or even watches. “Are you entered?” - ‘Gladiator’ 😎

[@RandyContello]

as a photographer - i was YELLING at my screen about the offset location of light source creating a skewed line - thank god yall figured that out

[@The1withlogic]

I am a photographer as well and was yelling the same thing.

[@drdrums1]

That was my first thought - that door is probably leaning back just a bit, so any sort of angle from the level to the door would result in a skewed vertical line.

[@_B_K_]

As a better photographer, I was YELLING at your screen for you to stop YELLING.

[@233kosta]

It wouldn't be skewed if their board was straight in the first place. But yeh, once you lean it - it's bye bye precision, helloooo parallax error! 😁

[@zachjacobs9917]

I took pictures of some things one time and I agree

[@ericksoler1221]

lol of course Hawk Tuah girl made it in the video 😂😂

[@Taabituubi]

I've been intentionally avoiding it and finally it got me.

[@MikeStavola]

The worst meme of the decade, so far.

[@devilmikey00]

I used to work at a place where we had to cut down hundreds of boxes every day and those mini chainsaws are amazing. Easy to wield and will tear through cardboard in a split second. Makes pairing down boxes go from a tedious annoying thing that can take forever, even with good blades, to a quick 5-10 minute job. Highly recommend for that one specific application.

[@Damicske]

That table saw is soooooo dangerous, maybe next time get chest body armour (not from temu/tiktok/ali)for protecting yourself from a sketchy device like that.

[@Hellsong89]

Well... seen worse and hey gotta give to them, it has better fence than my el cheapo table saw, but then again i trust it just about far as i can throw it and just do rough cuts to then plane or sand into final dimensions. Beats using other tools for those cuts and well the fence does have the mechanism to have it lined with the blade, but where this thing shines there is lock on both ends, while mine bends... There is somethings i like this, but lots what i hate. Quite close to what i have now.

[@drdrums1]

That table saw single-handedly increased the appreciation I have for my portable DeWalt table saw.

[@kampfgeist7703]

Im over here hugging my ridgied lol

[@evanfrey]

That's a spudger. It's used to trip clips and pry apart things like laptop screens or opening phones and the like.

[@K-Anator]

I got a few of these items from Amazon as part of the Vine program. The little chainsaw is handy, especially if you have a ton of raspberry bushes to eliminate. I also have that screwdriver, or one very similar anyway, made by Soleilwear. It's got a much nicer case in my opinion, all plastic mind you, but it's not that Borg cube of bits. It's also got a built in magnetizer and a slot for needle nose tweezers and a pry bar. Best precision kit I've ever used, no problem tearing down old laptops and the bits aren't soft. Edit: Yea, the Soleilwear screwdriver is almost exactly the same as the one in the video, just a different case and slightly different driver; mine has a battery indicator and no "speed". Neither are OEM, they're a white label product with whatever dropshipper's name slapped on them. I find it great for electronics and would definitely recommend it if that's your intended use, certainly not a replacement for your standard drivers though.

[@michag4337]

the mini chainsaws are nice because my dad likes to do yard work but he doesnt have the strength to use pruners, so those little chainsaws work great for him.

[@anzicek]

If the drywall isn't perfectly vertical, the position of the laser will cause differing vertical lines to be cast. That's why the two were not parallel until moved next to each other.

[@stephennadworny8401]

John, you and your crew are super entertaining. I won't be fact checking you but you entertain with confidence. You have a great personality on camera. I enjoyed this episode and your stream-of-consciousness dialog. I appreciate all your comments about safety. Keep up the good work.

[@shadowalker4955]

10:02 I love how he puts pressure on the back of the drill for the Diablo bit, but not for The tick tock bit

[@NinjAsylum]

4:10 That is an electronics repair screwdriver kit. The flat prybar looking thing is to pry apart your cellphone/tablet, remove batteries etc.

[@DK_1983]

2:20 Rotten walnut.. But still.... Kind of impressed so far :D 4:09 Its for violently breaking apart phones, batteries. Shit that is glued together :P

[@shaynecarter-murray3127]

I think this is the first time ive seen someone actually using a blade guard on a table saw on a video that wasnt specifically a "beginners guide". That saw must have really been terrifying

[@scottsimpey2965]

Ohh my god, that tablesaw was terrifying! I really didn’t think that you were even going to try running anything through that ganky pos thing.

[@rockfosg]

The lines arent parraell because the melanin Isent set straight and the laser are set at an angle to it. If the wall you put the line at is tilted back in the top, and the laser is set at an angle, the laser hits the wall further away at the top.. Edit; started writing before you guys found out.. 😂

[@rn.v4629]

the chainsaw is nice for camping, when u collect some wood in the forest and its a little to big to throw on your firepit. cutting pallets or something. for 12$ bro its a steal

[@moobler]

I have no idea why youtube recommended this video to me, but I am so glad it did. I loved every second.

[@latetotheparty7551]

Thanks for making such fun videos. Your editor is also great.

[@sk8infreek]

I bought the Fanttik laser for $21 shipped because I'm building a bedroom and bathroom in my basement and the thing is awesome! Perfect for a homeowner and honestly could stand up to some of the high end ones like we see in this video!

[@SollowP]

That electric screwdriver is perfect for computer stuff as high torque is not only not needed, it's actually a selling point to the screwdriver. If you have to put in like 10 screws one after the other and all of them are for delicate components, the last thing you want is to overtorque one screw and accidentally crack a motherboard. The fact that it comes with a pair of tweezers and a little prying bar is a dead give away it was made for use on electronics. I have one (though not the one shown) which works wonders. Low torque for putting most of the screw in, but it can also be used as a bog standard screwdriver to loosen or tighten the rest of the way.

[@SarahKchannel]

I am a R&D designer and engineer. I have several of this screw drivers for my most common small hex and torx bis. I used it every day. It is meant for more delicate work, not work for a wood workshop.

[@natearrigoni]

I will disagree as I had that model and it wouldn't break most screw, you had to twist it like a normal hand driver. The bigger one, the S1, actually works well.

[@BRK-ee2se]

The fantik screw driver is amazing for computer/electronic tear down and assembly, was well worth the money I love it!

[@scaletownmodels]

I bought one of the 20v electric pruners off of Amazon. It's the larger one that does up to 30mm branches and it's a beast. It's so much fun to use and it's absolutely unsafe in the hands of a moron. Pull the trigger and the jaws are closing in a half-second and any part of you in the way is gone. So much fun. It also wasn't cheap and it's not built cheap. Nice and solid. I like that it also has a mode so the jaws only open halfway so you can work on thinner stuff faster as you're not waiting for it to open the full 30+mm.

[@SharpWits2013]

4:10 It's called a Spudger, used for prying things yes. Very common in electronic repair kits, comes in plastic and metal usually.

[@rpandocchi]

8:12 The answer is = Gladiator. Great movie btw and love the reference!

[@jonagill]

I think you should use that metal drill bit thingy with the electric screwdriver, I think they're probably made for each other 😗👍🏽

[@mattnorthernmn2803]

Ouch the reference to Leadership training courses.... Hahaha now that's rough! 😂 IYKYK Semper Fi Devil

[@Teknyk303]

Omfg. The way I yelled when you clipped the ultimate showdown. Throwback. Hooooly

[@rswearing]

I have the non-electric Fantik set and I love it. It's not for heavy work. For electronics, but I've found it super handy for delicate screws like box hinges. Fantik also makes a portable tire inflator for your car that is absolutely outstanding. It goes with me everywhere and has been a lifesaver more than a few times.

[@dreadtrain2846]

The pry bar and tweezers are great for computer and phone repair.

[@michaelpurdy1116]

The tweezers may be for picking up/holding the tiny screws you may be working with.

[@MyGrowthRings]

Heck yeah, John endorsed the Shopsmith!

[@bic235]

Lil bits reference was golden and I love the mini screwdriver

[@Johnnybananass-_]

I have the screwdriver in my guitar tech tool kit. I use on tour with guitar repair side of stage as none of my screws are load bearing but it’s not too over powered it chews up screws. I love it .

[@rodneyking4183]

I bought one of those mini chainsaws from Amazon a month ago. Mine is yellow. Same packaging, gloves, charger, 2 20V batteries, oil, safety glasses in a black plastic case. My neighbors trees had branches coming over to my side of his fence and over the front of my garage. I went out there and cut every branch down with no issue. That was the best $35 I spent.

[@ricetherad3482]

If you want an automatic screwdriver, give up another $30 and get a Vessel Ball Grip electric screwdriver. Super handy little tool, would love to see you put one to the test

[@smokeybowls187]

Still not built for heavy duty applications, I'd guess. I'd love to be surprised though. I will say, however, that they're still quality drivers nonetheless and function perfectly for screwdriving tasks. I use the ratcheting version with a quick change bit adapter as a little stubby bit driver and it works a treat for the less stubborn bolts on my machines at work. Vessel makes alot of great stuff even outside of their heralded screwdrivers (I suggest perusing their tool/bit pouches & holders like the mini ball handle bit holder/driver, for example) and I'll never suggest them highly enough.

[@bubby-un34benny-un46]

The king👑 of youtube is back and made a another good video and I love his channels

[@imnota]

4:11 it's a prying tool, used to take apart electronics and laptops mostly, to pop out all the little plastic clips. Tweezers are useful for small ribbon connectors, or to get small parts that might have fallen into nooks and crannies. I work in IT and have a very similar kit (albeit with a non electric screwdriver, but same type of case and pop out mechanism with all the bits) that I keep in my bag all the time, as well as a bigger ratcheting screwdriver with bits in the handle. Makes it so I always have everything to open up a computer, laptop or other smaller device.

[@OsoGrande5150AZ]

Thank you John. For risking your safety, to protect ours.🤕

[@cjones1262]

Movie is Gladiator

[@mickeyhavoc939]

I love the electric screw driver for RC trucks, especially for my 1:24 & 1:18 scale stuff. They all use small machine screws

[@JonesyMcDanes]

I love those little auto punches, I got like 40 of them off of ali express because they're only $1 each, and I stuck them to every machine / workbench / table I own.

[@willd7033]

Thats funny. My Mom bought me that little battery chainsaw for my birthday. I never thought it would be worth a crap. Instead, Its actually pretty handy. I've been impressed with it. I have an Echo CS-590 and bring the battery one with me too. It's great for the little limbs and stuff.

[@iiRR3lephanttt]

21:37 😅I died at ‘HEART LEVEL’

[@ALMAX65]

lol you where sweating bullets trying to convince us that the your laser was better, for the price difference I would be sweating too.😂😂😂😂😂

[@rvoykin]

The scewdriver has a more powerful bigger brother with bigger bits. I have both and almost a year in both work really well, the plastic case is fairly bomb proof. The small one doesn’t have a ton of power but for what I use it for that’s actually a good thing because the bits are pretty small. It’s more of a precision screwdriver but the larger one they sell it in a set with 6 nm of torque, which is enough for hand screwdriver applications.

[@a9ball1]

That was fun. I think it's safer to bolt your 7-1/4" portable circ saw to a board and use it. That table saw wouldn't even make a good boat anchor. The laser test had me in stitches.

[@Fresh1O1O]

I have the larger version of that screwdriver and I love it! Not a drill, but you can definitely use it to drive some things.

[@BobaPhettamine]

evan era got paid to say he threw all his screwdrivers away lol

[@A_Wild_Dyzzy]

I use those stepper bits (we call em Christmas trees) at my job. I’m glad my boss buys us ones that actually work. Those things were as dull as a butter knife. 😂

[@gnitsark5265]

Its a spudger. Really a medical spatula, but we use them for spudgers. You can use it to pry open plastic cases. Also can use it to scrape off potting compound and expose traces, in a pinch.

[@BFT88]

Hawk Tuah girl did not disappoint hahaha

[@573customs6]

Fantik sells a badass portable battery powered air compressor. I use it on big trucks and tractors. Works great.

[@joeyteter9383]

3:05 every time someone mentions Costco, I think of that movie. I love that movie lol

[@honzasurik7149]

+1 for the Metalocalypse clip. :D

[@coyster530]

That little screwdriver kit might be cool for when I'm out running my RC cars because they use a lot of hex screws

[@bepstein111]

I'm a big fan of the ES121/ES15 screwdrivers, instead of the forward/backward button, it's gyro activated, so you just turn it like an eighth of an turn whichever direction you want it to go, and it keeps going. Definitely more for computers or like, I use it on my 3D printers all the time, or at work in equipment racks. For anything in wood or the walls, I don't even bother with those things, I just use a normal drill/driver. You definitely hit the nail on the head, it's for electronics, not a workshop.

[@insanatized]

Not sure what the electrician was drilling into, but electricians drill into plastic boxes quite often as well.

[@rhecyeeyeejake7184]

Thanks for all the humor and memes in the vid it added the extra frosting to the cake😂

[@NGMonocrom]

That Saker is surprisingly popular! Possibly the best budget pruning chainsaw out there. Usually ships with 3 chains in total. Two batteries, a charger, and as we saw, a nice case. Surprisingly nice. Also, $500 for a laser level.... that's just as good as the one costing $13. Yeah, for saving $487 over the Milwaukee version; I can put up with an internal battery that _might_ need to be charged up before I can use it. As far as a budget table saw goes, Skil. We all know DeWALT makes the best one. But not everyone needs the best. (Or can afford "best" prices.) Get the Skil, happy cutting. Tune in next week when John's employees use his credit card to each buy the most dangerously sketchy tools for John to try out. What's that you got there, Sam? A hand grenade!? Dammit!! Hold on John, put on your Shop Shades before you test out that thing.

[@McCluckles38]

That Allan key tightening method is common on friction saws (for stone and ceramic). Seeing it on a table saw gives me heart palpitations.

[@TAZgarage]

0:43 brother, I'm not sure I'd say you have any business owning half these tools either 😂

[@paulmccullough7352]

Those type of electric screw drivers are not meant for breaking screws loose. You are meant to break it free by turning it manually while holding the button down, and as soon as it get to the right spot, the driver takes over and finishes winding the screw out. They are made so you don't F up you wrist winding out super fine tread machine screws all day. If you want an electric screw driver that can drive wood screws, you have to buy one of the large chunky ones that have enough torque to screw them.

[@BladeValant546]

So the tool on the screwdriver tower is to pry the screen and back off on cell phone. Tweezers for getting into tight spaces or tiny parts. So your computer or electronics is nailing it.

[@jamesmonroe4481]

Pry tool is for opening things like laptop cases. Need to slide it in to pop the plastic clips holding the laptop together.

[@dragon411320]

4:10 a spudger is the common term, basically just meant to help disassembly at the same of two injection molded pieces, clamshells so very common with phone/tool assemblies. Definitely is techie-oriented but for the shop can be handy for small power tool maintenance/repair like new trigger on drills or of course the cameras you use. Might as well toss the battery screwdriver itself in trash and keep the bits/spudger themselves and holder in a drawer for when needed for that one really odd technical job down the road.

[@Dr_V]

Small isn't always bad for cordless chainsaws, but build quality matters more than anything for these. I own a 10" blade 18V cordless chainsaw made in Germany that can slice trough branches as thick as my arm just as fast as a motor saw and, at just under 7 lbs (including the battery), is great for pruning large trees from a ladder or harness. I've used it for pretty much everything by now, from removing smaller trees to carpentry and even firewood chopping, it's a bit slow in hard wood but will get the job done, saved me a lot of headaches when my motor saw failed a couple times at the worst possible moment.

[@angrymater13la]

The screwdriver set is for electronics. It works great on computers and cephones and things like that

[@natearrigoni]

I like the Fanttik S1. Its metal and solid and drives things well around the house of just small shit. You got the cheap one, I can't even set screws on electronics with the one you bought, cuz I bought it too and returned it.

[@DeltaGammaKilo]

That paddle tool in the second tool set you play with is called a spudger tool. It's intended to be used for fixing electronics where you often times have to have a thin tool to slip between case joints to pop off bezels or pop apart pieces of a laptop/phone case. Also used in cases where you have cable plugs that are delicate and you need to prop the plug out of the socket on the board without pulling on the wires (NEVER EVER PULL THE WIRES!)

[@fishingformikeytv9200]

I love that screwdriver for taking apart my fishing reels to clean them but even then i have to give it a hand turn first

[@hippiedude2232]

🤣 didn't expect to see hauktua girl, or chapel, or any of the other jump-scare-memes.

[@Jedi_CVO-RG]

I have a Fantic battery powered air compressor that I keep in my motorcycle and love it.

[@absolutelyblasted]

Just discovered the second channel. Gonna be a good night. 😎😎

[@devilblueduke]

Have a Twinkie

[@Mykelthompson]

One of your funniest videos ever. keep up the good work john and all your guys are awesome.

[@JamesG-k5f]

The electric bit driver is for phone repair. The flat bar is to pry phones apart. iPhone especially. Seen many videos of people using a similar flare bar on iPhones.

[@JaysonStark]

3:39 the fact that you know Dethklok! Brutal!

[@robertdascoli949]

I bought one of those mini chainsaw's that was compatible with Makita batteries for $40. I adore it for small breakdowns, and I even cut a 6 in tree branch with it. The actual Makita mini chainsaw was almost $200! There's no way it's a 4-5x better tool.

[@liquidrockaquatics3900]

To be fair, if you got that whole kit for under $15, you paid for a battery and got a mini chainsaw kit.

[@CadgerChristmasLightShow]

I do landscaping for work and at one of our accounts theres an old couple with a pretty large wooded property. They were having us clear branches and they brought out one of these no-name mini chainsaws to let us use. I proceeded to use it and i was blown away how awesome it was, Even with a generic little 18v battery on it. Much faster and easier than using loppers

[@ElMariachi1337]

Keep in mind Makita machines are actually communicating with the battery, those $40 machines aren't. Which could lead to overload and eventually brick your $80 dollar Makita battery by this cheap machine. I'm not saying these $40 machines are bad, but you gotta make sure what their limits are and don't use em as a professional machine.

[@robandsharonseddon-smith5216]

The flat thing is known as a spudger. Its for prying open cases. My Hammer K3 has a similar way to attach the blade. Much bigger and easier to access but essentially the same. Its really secure but also has drive pins.

[@kowiz920]

It mind as well not be electric killed me 😂

[@VinnyHaw]

So I have the second tool showed off in this video. It's definitely more for electronics than household screwdriver needs. Like you said in the video it is something use more for like a laptops or computers or something along those lines. It's not something that's going to replace other tools but it's kind of a good to have set just in those niche scenarios.

[@leonardhirtle3645]

Those step bits were hilarious.

[@billymanilli]

I have one of those little chainsaws... lol I love that thing! 4:07 It's a little prybar tool to take apart bezels and such 🙌

[@darryltorgerson6592]

I have the Fantik S1 Pro and E1 Max. I use both daily in HVAC Service work and they've held up with no issues for a year now. Definitely think Fantik is a brand that is worth the money!

[@ja12765]

Gladiator!! Can’t wait for the second one! Great video 👍🏼