I am watching it now. A bonus on a Labor Day and a time very much worth spending for me. Mr. Jason, you listened to me which I very much appreciate from the bottom of my heart.
@Systemcontroltech6 жыл бұрын
Glad to help.
@HVACRCERTIFIEDTRAINING4 жыл бұрын
Nice
@TheShizock6 жыл бұрын
Nice to see you back with some CCT info. To Joseph, incremental output is a binary output thats is just a open/close, on/off type of output that varies the time that is is on to control the valve, proportional is a analog output to varies from 4-20ma or 0-10 volts to control a proportional type actuator.
@Systemcontroltech6 жыл бұрын
Thanks
@jjeielrod3 жыл бұрын
I love this video, your programs look a little easier to navigate vs tgp and tgp2. I like that you can see what controls the outputs so easily. It would definitely help the troubleshooting process.
@Systemcontroltech3 жыл бұрын
It was harder on older versions but newer versions of the software make it easier.
@MrJovan19746 жыл бұрын
Thanks for JC CCT Basics. I appreciate your time and effort which was useful for me. Thank you. I will go back and see some of your other videos. It is of GREAT help to me. Thanks Mr. Jason.
@Systemcontroltech2 жыл бұрын
Thanks for watching
@l.crossjr6 жыл бұрын
Nicely explained. I’m loving these videos. Would love to see a similar video on GX9100
@Systemcontroltech6 жыл бұрын
I currently have a couple on my channel. I'll be doing more
@MuskyMobGuideService6 жыл бұрын
@@Systemcontroltech yes please do
@maximum979165 жыл бұрын
Thanks for creating such a quality content.
@HVACRCERTIFIEDTRAINING4 жыл бұрын
Sure
@Systemcontroltech2 жыл бұрын
Thanks for watching
@abubakralzain5 жыл бұрын
Thank you for your time and effort you are putting to make those videos. I found it very helpful and valuable to me. It would be very cool if you can show us how to make schedule based on the run-time (lead lag chillers for example). thanks again.
@Systemcontroltech5 жыл бұрын
I will see what I can do.
@JesusRocks8466 жыл бұрын
Do you no what the difference is between incremental and proportional control for a JCI control vavle ? Thank you!
@Systemcontroltech6 жыл бұрын
It uses a binary output to move the actuator. One output per direction.
@JesusRocks8466 жыл бұрын
@@Systemcontroltech thank you
@shawnharper34403 жыл бұрын
Great refresher and you explain things better. How does a guy know where the program is at? If an actuator isn't opening and it's below setpoint and the damper operation has been verified. The exhaust damper is just sitting there? some trouble shooting tips? thank you.
@Systemcontroltech3 жыл бұрын
You would need to go into the program and monitor it in real time.
@shawnharper34403 жыл бұрын
@@Systemcontroltech So commission into the controller and watch the logic block or state tables change or not? I could change the vav from heating mode to cooling mode and the output block just sat there.
@Ahmed6006-d8g5 жыл бұрын
Thank you How i can creat backup from Johnson Controls ???
@Systemcontroltech5 жыл бұрын
Are you talking a backup of the program? You can upload the program out of a device.
@JesusRocks8466 жыл бұрын
These vidoes are so valuable thanks again ! I was wondering if you could make a video on setting up a FEC for just a constant air hot water heating coil with a control vavle on it ? Im use to doing JCI vma1832 programs but its diffrent when you just have a heating coil with constant air and no damper.
@Systemcontroltech6 жыл бұрын
I'll see what I can do
@codytaylor99732 жыл бұрын
This is an older video but I have a question about CCT. After I go to transfer and upload program, it will load to 100% and say successfully transfered to computer, but it will stay at johnson controls screen and load and never pull up the program. Is there anything I need to try? My Map tool seems to be communicating with the controller, something in CCT seems to be messing up. I’m an on CCT 10.2 and the main code version in controller is 6.2
@Systemcontroltech2 жыл бұрын
You may try reinstalling CCT. Upgrade to the latest version if possible. I've seem that happen with 10.2 when controller was at a newer version but not sure about older version in the controller. If it's just this device you're having issues with try to get upgraded cct.
@eracismm5 жыл бұрын
90% of the Acronyms that JCI uses I'm familiar with, at times though in the CCT programming there will be an acronyms that I do not know......is there a JCI acronyms page or list somewhere? Thanks, John
@Systemcontroltech5 жыл бұрын
You can usually find them in the help file.
@nyssteelheader1476 жыл бұрын
Nice explanation. Good refresher
@Systemcontroltech6 жыл бұрын
Thanks for watching
@yungerallenelectricalcontr64152 жыл бұрын
Thank you Tremendously for this Great Life and Career Uplifting information !
@Systemcontroltech2 жыл бұрын
Thanks for watching
@josephcameron81803 жыл бұрын
Could you explain CCT vs PCT? Are they basically the same thing?
@Systemcontroltech3 жыл бұрын
It's only a license difference.
@gajendrapandey5202 Жыл бұрын
Dear sir can you share download link for this software
@Systemcontroltech Жыл бұрын
You need to contact jci
@gaelicamericancraic18164 жыл бұрын
I am a Honeywell WEBs N4 and AX software programmer in the NYC area and would like to thank you for putting these excellent videos out. I wanted to email you but your link to your blog is no good. Is there a site that I can contact you on?
@Systemcontroltech4 жыл бұрын
I shut down my blog a couple years ago. It wasn't getting traffic and server space isn't cheap.
@gajendrapandey5202 Жыл бұрын
Hello sir can you help me to learn about CCT please tell me how can I get this software for practice
@diegoromao18396 жыл бұрын
Hello, can you help me? I have metasys ADS system and it says my NAE is offline and gets a red "x". What do I do? it shows a pop up that (flash usage) is full at 141%. How do I delete it ?? And when I log into the database manager it says it's corrupted.
@Systemcontroltech6 жыл бұрын
You will need to reimage the device
@diegoromao18396 жыл бұрын
@@Systemcontroltech How do I do that? Do you have any video that can help me?
@HVACRCERTIFIEDTRAINING4 жыл бұрын
Nice topic
@Systemcontroltech2 жыл бұрын
Thanks for watching
@gt40331335 жыл бұрын
Hi. Do you have any videos related with graphics images upgrade or modify. Thanks
@Systemcontroltech5 жыл бұрын
Very few. We never change graphics in house
@gt40331335 жыл бұрын
@@Systemcontroltech perhaps to have a video when you have to remove a controller from the tree then the graphics has to be updated for the divice that you are replacing to. Thanks
@anandappu71756 жыл бұрын
I love this video I want to learn more about it
@patrickjones74344 жыл бұрын
anand Appu they are good and do run training courses depending where you are in the world
@Systemcontroltech2 жыл бұрын
I've got more videos on my channel
@gt40331335 жыл бұрын
Greetings from Miami. Great video. This may not be the right tutorial to ask you abouts NAE emails configuration. Do you have a video on how to create a gmail account into your metasys engine. Thanks
@Systemcontroltech5 жыл бұрын
You should be able to add your email to the user account in your system for a particular user. There are different functions that can be done and reports that can be generated and sent to the email address depending on how you use your system.
@samuelyarmagyan6454 Жыл бұрын
Is there anyway I can get my hands on cct?
@Systemcontroltech Жыл бұрын
Contact Johnson Controls
@muhammadfaiz2155 жыл бұрын
Thank you for sharing this. Could you please upload video about commissioning Johnson controls integrator or NIE with third part party devices?
@Systemcontroltech5 жыл бұрын
We actually don't use any NIE integrator anymore. There are a lot of things that play into this. We once used the Sigs to integrate with a barbor colmen system before completely converting it over.
@muhammadfaiz2155 жыл бұрын
@@Systemcontroltech Okay. Would love to see a video on integrating MIG with third party devices using Modbus or BACnet. It will surely help to get an idea about configuring, downloading .vct files and assigning addresses to them.
@davidryder3374 Жыл бұрын
I'm looking for someone to do some mods to our existing Metasys plant automation software. Our local Johnson Control office is beyond painful to deal with and I need to move a couple projects forward. If you've got those chops and would like some consulting work, hit me up.