Joining 3 Motors In 1

►Subscribe! bit.ly/2m1d1y7
►T-shirts & Hoodies! bit.ly/2kABytm
Mini Live Steam Engine Single Cylinder Model: goo.gl/pvgSaV (8% OFF Coupon: ToysHo)
Banggood Sept 25-Oct 8 Big Clearance: goo.gl/ThufbP
Banggood Unbeatable Weekly Deals: goo.gl/D4nSuP
Some other interesting interesting engines you must check out!
16 Cylinder Stirling Engine Motor Model: goo.gl/oxPTEu (8% OFF Coupon: ToysHo)
Stirling Engine Model: goo.gl/2dobPN (8% OFF Coupon: ToysHo)
Mini Live Steam Engine Model: goo.gl/PyEUd2 (8% OFF COUPON : ToysHo)
Mini High Speed Turbine Model: goo.gl/iXLQSs (8% OFF Coupon: ToysHo)
SH-02 Stirling Engine: goo.gl/1Y23qP (8% OFF Coupon: ToysHo)
Check out my lathe and camera equipment on Ebay!:
kit.com/JohnnyQ90
Support my videos!: / johnnyq90
Subscribe to my channel! / johnnyq90
Follow me on Google+ plus.google.com/u/0/b/1046338...
Follow me on Twitter! / johnnyq90
Songs:
1) Get Lost (Instrumental Version) - Niklas Gustavsson
2) In It (Instrumental Version) - Ramin

[@johnnyq90]

Mini Live Steam Engine Single Cylinder Model: goo.gl/pvgSaV (8% OFF Coupon: ToysHo) Banggood Sept 25-Oct 8 Big Clearance: goo.gl/ThufbP Banggood Unbeatable Weekly Deals: goo.gl/D4nSuP

[@sulemanwalijanofficial8397]

JohnnyQ90 o

[@DiyEcoProjects]

Interesting, and well made. Can i ask something please. If there was like x9 of these. Could they be fed from one pipe and have x9 spinning fly wheels ... these could then be connected to small generators?

[@toddthegamer]

Hi

[@Johnyquest1]

There's just no way. Definitely impossible. The moon was one thing, mounting generators to spinning things ... No friggen way.

[@owenarmsden605]

JohnnyQ90 no

[@krueller3638]

Cool, I'll put twelve of them together and put it on my bicycle. Not too many people can say they have a twelve cylinder powered bicycle. :)

[@a.k959]

Duncan F. You also would need an air compressor

[@brianargo4595]

A. K just make a pedal powered compressor

[@harrisp584]

Brian Argo lmfao a genius design! So innovative, a motorized fuel-less bike! *in fine print* : "air compressor pedal powered"

[@buddyclem7328]

You could carry an air tank, and refuel at any gas station air compressor. Sheetz has free air.

[@thomas_nl_]

You won't have enough torque

[@maxjonson9114]

Make a pocket steam turbine charger(5 watt) for phone with the boiler on the wood or gas

[@PunakiviAddikti]

Max Jonson Making it a pocket charger would be very impractical, as it would have to be upright at all times and you'd have a fire in your pocket. If you want power in your pocket, get a 20000mAh power bank. They cost a lot but can charge your phone from zero to full up to 10 times.

[@MegaMetinMetin]

PunakiviAddikti more like 6 times

[@thatpersonyouknow3747]

LEXUS-RX300 depends on phone and the quality of the power bank.

[@mwakelin]

I think you've missed the point. Of course a steam turbine phone charger would be impractical, and not exactly he sort of thing you'd carry in your pocket. But it would be cool !! Amazing to watch being built, a brilliant achievement, and a great talking point ! Sometimes you do things because you can, not because it's practical.

[@harrisp584]

mwakelin exactly! Any mt. Everest climber would agree!

[@Xenro66]

If I had a machining shop and the skills Johnny has, I would probably make an RC car with one of these engines with a little canister of compressed air to run it off :D

[@matzo33333]

I'd make a steam-powered RC car, including a little generator to power the electronics :D

[@prankcommando600]

Xenro66 no you won't. I have a lathe machine and the skills. But no time💔💔

[@wyattreynolds3503]

I completley agree

[@tibfulv]

You may be able to make yourself a machine shop. Look up the Delany Multimachine and the Yeomans Lathe. There's also several CNC machines you can build.

[@kean3258]

I was thinking air compressor connected to rc battery

[@TheSoldatov]

This is new Ducati engine))

[@phil955i]

I would've thought it being a triple more likely a Triumph engine ;-)

[@travisghetm2553]

TheSoldatov I

[@bobelaviador]

chuck Norris new race engine

[@zakkantz7779]

TheSoldatov m

[@jaratt85]

really Chuck Norris? this isn't WoW Barrens chat here..

[@tommy_workshop3490]

really a great job, how did you get the support that stops the spindle is in steel or aluminum, I would also like to build it for my lathe it would be useful to have it, still compliments for your accomplishments :)

[@johnnyq90]

Thank you. I didn't make this part, It was made in a CNC machine shop.

[@tommy_workshop3490]

Thank you for the reply . then I will look for some CNC labs for the work of the piece.

[@rouge5140]

Don'build it, you give 3 times less air for each motor so you get 3 times less power, the you add the friction these "upgrades" add you end up having less speed and force than originaly

[@joshmdmd]

that depends on whether the loss to friction is more than the gain in transmissible force, as there is always one piston firing and power is more even.

[@ArtyomPlatonev]

that soldering was soooo satisfying for some reason.

[@Brock_Landers]

JohnnyQ, you have some SERIOUS fabricating skills. I am absolutely jealous of you. I love making abnormal things into something really cool.

[@DevinSloan]

You're one of my new favorite youtube channels. Thanks for being awesome.

[@terryeleeemail]

Nice craftsmanship Johnny, thanks for sharing.

[@zaneaussie]

Love your work man! You have such attention to detail. Mesmerizing! Keep up the great work!

[@xgamer34_94]

The metal work is so satisfying

[@FairlyOldGit]

What PSI are you using at 10:07 ? BTW with three cylinders placed like that the engine should self-start I would have thought.

[@greyson6800]

R W A i

[@pjhalchemy]

Well done JohnnyQ! Next step a 6 cylinder radial? Great work as always!

[@ekamdhaliwal2395]

How to work.....no petrol tank or no diesel

[@gurnamsingh7369]

Air

[@maximeveilleux6469]

Building part with conventional machine tools is so satisfying.

[@DIZZYDAZZLER2011]

This guy has sooooo much patience and mega attention to detail....brilliant vids brother!!

[@akihitolucilius2881]

Incredible work sir!! Would it be practical to build a compressed air rotary tool based around this engine? I imagine it would produce more torque at lower speed than a turbine would?!

[@MrSlehofer]

now join 3 nitro engines :)

[@tleg6969]

MrSlehofer look up rc tractor pulls they join multiple nitro engines

[@melted_pistons]

I’d love to see that!

[@tleg6969]

kzbin.info/www/bejne/rXfCh4Gvnd6qmJo

[@nightfire9748]

MrSlehofer 3? You mad! 4 nitro engins omg that thing would fly in a nitro car be winning drag races with in seconds XD good job this is really cool I always loved creating things but your really giving me the earge to get out there keep up the great work Jonny

[@swagatakushte6044]

Please give your contact number

[@danteverna4261]

This has got to be one of the coolest engine builds I’ve ever seen

[@ChrisB257]

Great build - much enjoyed. :)

[@blackturbine]

Nice work sounds excellent and probably packs power

[@fokuscs]

make it a v6 engine like it pls

[@n4120p]

very nice to watch skillful hands on working machines

[@CartersTrains]

3:18 that sounds really cool!

[@simonaarekol3336]

The engine: exists Me *"Why are you so CUTE?"*

[@MrSzero13]

Whoa amazing man !

[@fernandoenriqueromeromendo529]

It's a jewel! Very precious!

[@userGGG702]

what a beautiful work, great job thank you so much for uploading

[@MAlgol]

Would be cool to have something like this connected to an Airbrush compressor and then being able to use different dremel tools. Use it as a small disc sander and more.

[@daanb7894]

He already did it with a nitro engine kzbin.info/www/bejne/gp27nZuueNyrrJo

[@DawgYa1]

Steampunk dremel!

[@jW-kr5xn]

Make a car powered by compressed gas? Is it possible to mount a gas tank or even a balloon on the car?

[@TheRedneckAtheist]

Use an HPA paintball tank, but you'll have to figure out how to drop the pressure(3000psi) to something usable.

[@rdizzy1]

Could put some type of flow limiting valve on those small co2 tanks or something as well.

[@buddyclem7328]

There is a guy building full-size cars that run off of compressed air in France. The tanks are massive and run the full length of the car.

[@Johnyquest1]

Nope, definitely impossible.

[@brittanycolburn2899]

Adams tenn old one cylender engine and steam engines

[@npsit1]

That's amazing for such small parts. Good work.

[@Syrus54]

love how you make this shit look easy

[@superdave54811]

Now turn that movement into motion on a vehicle, through water,air or land. Anything to show it being useful.

[@shareitall1011]

You should try and make a V-twin or try to supercharge that 3 cylinder

[@roycesmart8019]

shareitall1011 wont hold boost look at it

[@thomascott7425]

Very impressive. I wish I had your tools, I can just imagine all of the nifty little projects I could dream up.

[@AnthonyMalesys]

Hypnotising. Such a huge amount of work for ... I don't know, but that's amazing !!

[@b_mb4948]

When are you going to make your own engine? (not a Tesla turbine, an engine with some form of piston) I reckon you'd be bloody good at it!

[@JustInTime0525]

By chaining 3 motors together do you get increase rpm with the same psi? I think the torque will definitely increase, but not sure about rpm

[@PErik-sq9rv]

NERF870525 no....i think its decreasing the rpm brcause you need to feed 3 times more...with the same amount of pressure

[@MazeFrame]

I do not expect the RPM to be any different, assuming you can supply enough air to keep all the engines fed.

[@mastudio8301]

Hey,

[@LukasBonny]

The rpm is given by the torque and the resistance of the motor and flywheel. So, if you supply 3 times as much air, the RPM will be around 3 times as high without any load, a little bit less since more friction. If you attach a load the torque is higher than with only one engine, thus driving the load with more RPM. If you where to get the engines to run at the same RPM, the i3 would get more torque. In other words: RPM and Torque will be same same, if you supply the same amount of air. But the i3 engines can of course take more air, since it has 3 times the displacement.

[@karlismurnieks9123]

Bro, these videos are the most satisfying videos I have ever seen in my life and I love what you do and ceep on doing it.

[@georgejohnson1124]

Excellent workmanship and video...............Thank You Johnny.................

[@gnautist]

Now make a W24 Nitro :P

[@thefabouschanel1409]

You are so prefect

[@danielskoog5565]

As always, extremely well done build!

[@bryanwalters502]

I think I love you for posting such bad ass stuff.

[@insanelawnmower972]

Make a inline 6 engine!

[@buddyclem7328]

Mountain neXt Or I-5 like in the Chevy Colorado or the VW Eurovan.

[@akari6468]

Make a tiny 8 piston engine, try v8 if possible

[@akari6468]

thats why i said v8 if possible

[@zacsbigburgers371]

JCL 2803 lol

[@joeviking61]

Amazing work !! Love your channel !!

[@timjs1018]

I love how easy it is to see the Clickspring influence in your work. That is not a bad thing!

[@severimauno4712]

Try to build diesel engine

[@buddyclem7328]

Severi Mauno Nitro engines run on methanol and nitromethane, and they are a type of diesel engine, so he already has. But, it would be cool to make a diesel that could run on cooking oil, diesel, kerosene, or jet fuel, because those are more conventional diesel fuels.

[@mahmoudabdelsalam1649]

Hey JonnyQ90 make a novibration motor and to test it place a coin on and dont make it fall

[@BOEING--mh6xm]

1:42 look at that ring fly

[@todoido13]

Beautiful sculpture!

[@harambejr.4711]

Hope you don’t get challenged to a 40 roll race.

[@user-xj4ef5pv2d]

*making a nipple for the air tubing*

[@fi8er1]

One of those channels where I like the video before watching it. Thumbs up! Do mention the time-lapse speed, helps visualizing the procedures better.

[@lightningflash3668]

Would love to see these mini engines be connected to something, and do some work. Such as a small gear system, or something similar.

[@sameermh7841]

show inside part plz

[@isaacbourn417]

Sooo... What does it run on ?

[@10010Linus]

Isaac Bourn compressed air

[@isaacbourn417]

the face in da wall oh right

[@edlingja1]

Air. He could do some clever engineering and work out a 2-stroke gas, or a simple diesel/compression approach using a slightly larger, less beautiful model.

[@SathishKumar-ce7tz]

Isaac Bourn nm

[@SathishKumar-ce7tz]

Isaac Bourn

[@bin4rym4ge]

That's some beautiful work.

[@jeffberg340]

Korrekt. Sowas kann nicht jeder. Richtig cool💪👌👍🤜🤛

[@ves4345]

This was Entertaining and somehow therapeutic

[@JustFun-iz9rf]

Wow amazing. Love to see it working on steam

[@michelespinasse1763]

Very cute little engine. With steam it should fit very well a model of an vintage boat.

[@mickboakes7023]

Totally fascinating. Just admire your ability

[@user-gb4iq6iy5j]

Ameizing. This is how people develop the science and technology.

[@stevesievers1248]

Dude, I don't care what you build, I merely enjoy watching whatever you come up with. 👍

[@Polecat54941]

astounding engineering very impressed

[@artanthonyenao4158]

Those piston are so satisfying

[@Sigmatechnica]

Very nice work. You made all those brass upright parts identical! good effort! :D

[@WildfoxFabrication]

satisfying noise with the handsaw

[@karacupa]

Fun to watch. I would print some mounting tabs with holes on the base.

[@berndkaufmann4966]

As an Fitter, i really impressed about your skill. Great 👍

[@pauls5745]

very cool! makes me think of steam RC boats now haha

[@roob2570]

I did not watch this expecting to be oddly satisfied

[@fredericthom8113]

just one word : magnificent

[@locouk]

Awesome project! 👍

[@victoryin6257]

GOOD hand working!!!

[@pbansal23]

What a beautiful engine👌👌

[@jtjjbannie]

It's beautiful. it sounds like exhaust.

Love that sound at 3:21!

[@Acnlmaster]

that is amazing...good job

[@oussamalasfer4860]

I fall in love with you tiny get engines pls make other video about it

[@aaronarmstrongaa]

Thats beautiful!

[@davidaustin2172]

That’s totally brilliant! How do you keep your hands SO clean!

[@reptilian6413]

you have some mad hacksaw and file skills!

[@zenithomega19]

You have some of the fast hand movements I have ever seen

[@elwawan]

Beautiful job !!!!

[@johnstutzka4250]

This really satisfied me

[@VinnyMartello]

That is some cool stuff.

[@racma8698]

Splendid indeed !

[@3DIYOriginal]

Awesome work !!!👍👍👍

[@stevenrice4106]

Nicely done, is there anyway to compound it? I would be interested to see how it performs plumbing the exhaust to power the next cylinder.

[@ecash00]

Something you may like.. we call them huffer puffer engines, based on OLD Centrifugal force wheels,. The engines Start with a Push of the Wheel, and only ADD force as the wheel slows down..Very high torque.. It was a design used on OLD trackers, to use as a Generator and make other systems work..from Tractor to Wood cutters.. Another is how the OLD steam engines worked, by passing the Steam pressure Onto the NEXT cylinder..Which was abit smaller then the 1st.. as the Pressure cooled it was STILL enough for the next cylinder..

[@ddavity]

Awesome, good job!

[@nikhilsrivastava3465]

This sounds very well

[@stumpy1495]

Offset all the cylinders by 120 degrees so they are not all moving in the same direction at the same time and it will reduce the amount of vibration you're seeing. Great little motor!!

[@c4snipar]

Mad skills. I know people out there would pay mad money for this, I know I wouldn't but I would want one.

[@Leandrodima]

Que belo trabalho de engenharia parabens.

[@seifness]

that high speed hacksaw was funny

[@TheStuartYork]

Excellent hacksaw skills.