Jones model 461 sewing machine review

Jones model 461 sewing machine review showing it's features and function

[@idongesitakpan1405]

This was soooooo helpful!!!!!! I have been struggling to sew straight stitches with this machine since I bought it. Thanks soooooo much

[@janetcozens4623]

Many thanks for your video it was so clear 😀😀😀👋👋👋👋👋

[@bondmachines]

Glad it helped

[@patienceifebhor7578]

Thanks for the video.. I just got the Jones 771

[@rosellen1015]

Thanks for this video

[@olufunkeidowumercyige-by8jx]

Good day sir My name is mercy I bought Jones machine 461,I want to ask about the needle number that I can be using for it and if I want to sow strength line which number I can set it thanks

[@victoriamolina513]

How much is the new jonessewing machin

[@happistarbenard5827]

Hi. Please how do I do reverse/backstitch on the Jones 461 machine. Thank you

[@bondmachines]

It uses a punch in reverse mechanism

[@idongesitakpan1405]

Please what is that small button for the bottom standing alone on the table part close to the stitch regulator

[@bondmachines]

Feed-dogs control

[@victoriamolina513]

How much is that new model of Jones sewing machin

[@bondmachines]

Don't know about the current price now

[@khadijakhan7552]

I have jones 461 but I lost the foot padle where from i can get it

[@bondmachines]

You can order it online

[@larastv9130]

Please I want to buy presser foot for my Jones 461, is it low shank or high shank?

[@bondmachines]

It's a low shank

[@larastv9130]

@@bondmachines okay. Thank you sir.

[@domclark9346]

I'm having a problem : I manage to thread the machine , but I think I have a tension problem. Each time I do it the thread gets unraveled from the needle. Either that or it gets tangled in the mechanism underneath the base. I'm not sure what to do , tyia

[@bondmachines]

Yeah.. That's definitely a tension problem!! You need to check if the spring mechanism in the tension still works, that's when you raise the footer does the tension plates open? Also check for loose thread that may be stuck in-between the plates

[@domclark9346]

@@bondmachines am I to tie the thread around the needle at all , I know this sounds very beginner , but this is my first time using any sewing machine.

[@bondmachines]

If you follow through the video on how to thread the machine, you thread the needle from front to back

[@domclark9346]

@@bondmachines I did that obviously that's why I watched it in the first place; but you cut the part where you put the needle through.

[@bondmachines]

Oh.. That's true... depending on the needle type you are using, there's a side on the needle that has a groove,a line running from the base to the tip,make sure it's facing you when you want to place the needle on the needle holder,then you thread from front to back

[@ebirimuchenna2100]

How much does this sewing machine go for please ??

[@bondmachines]

This machine is no longer available...I have others

[@victoriamolina513]

I have a Jones sewing machine.when i used it,the motor is going to heat.i want this .can ichange the motor

[@larastv9130]

Hi, I just stumbled on your video. I bought this exact machine from someone but on getting home, some black substance started coming out of the foot pedal. On plugging it, and trying to operate the machine, I wanted to bring out the thread from the shuttle. Immediately I touched it, it shocked me from hands to feet. I tested the machine before buying. And I bought it for 72k. Please Do I need to change the motor? Or the pedal?

[@bondmachines]

It seems it's the both the foot pedal and the electric motor...and it's also earthing problem and blown capacitor...

[@larastv9130]

@@bondmachines oh okay. Thanks for prompt reply. Can it be fixed? Because the seller asked me to bring it back.

[@bondmachines]

Yeah.. You probably need to change the electric motor and pedal to another one

[@larastv9130]

@@bondmachines okay. Thank you sir.