*Tools & Supplies Used* Bulbs Natural Yellow Light- amzn.to/2ZAFtay Bulbs White Light- amzn.to/3aCbJQM Headlight Assembly- amzn.to/3aBsjjV Pop Clip Removal Tool- amzn.to/37B6L4Z Mechanics Tool Set- amzn.to/3tbmEbo Ratcheting Wrench Metric- amzn.to/3k6uijp Cordless Impact Driver- amzn.to/3qfrPoP Magnetic Work Light- amzn.to/33tk6tp Mechanic Gloves- amzn.to/2w0i1SP Disposable Gloves- amzn.to/3fpRncB Safety Glasses- amzn.to/2XXe3dI *Thanks for Watching! Help Support the Channel by Subscribing & Clicking the BELL Icon for all NEW Videos!*
@dalatina911 Жыл бұрын
Omg there is a TAB you press in to release the old bulb?! 🤦♀️ no wonder it was so hard to remove the other one!! Thank you for this
@JonnyDIY Жыл бұрын
You're very welcome, happy I could help you out 🙌👍
@snowdker2 жыл бұрын
Awesome step by step video. Had no problem fixing this in less than 30 mins. Would have been quicker but I need to organize my tools. Not bad for a 49 year old chick! Thanks for the video!
@JonnyDIY2 жыл бұрын
You're welcome, awesome glad you were able to get it done 👍
@axeffektt5 ай бұрын
This went perfect on a 2012 GMC Yukon XL. Thanks for the video.
@JonnyDIY5 ай бұрын
Awesome, you're welcome, happy I could help you out 🙌👍
@mrfunkington2 жыл бұрын
You do t have to take the light assembly out to change the bulbs. On the passenger side you can remove the air intake filter box (4 screws and unclamp the hose) and you have complete access. Drivers side requires unbolting the windshield wiper fluid reserve and just pulling it out if the way.
@JonnyDIY2 жыл бұрын
Thanks for sharing, will have to give that a try next time 👍
@YesICanHearIt10 ай бұрын
If your hands are not too big, on my 08 Tahoe you can take the two top bolts out of the headlamp and tilt it forward enough to get a hand in there. Try to memorize how you get the connector out because you have to get it back in without being able to see anything. Also, the connectors seem to get degraded by heat, make sure they are connected as tight as can be. My connector was upgraded to the newer style on one side.
@bradofsaa10 ай бұрын
thanks for the video. great engineering by GM here...haha
@JonnyDIY10 ай бұрын
Lol you're welcome. Apparently some one else said you can remove air box on one side and something else on the other and get to them a little different than what I did
@homegirlrosie Жыл бұрын
helped my dad using this video in 2023 😀
@JonnyDIY Жыл бұрын
Awesome, glad I could help you guys out 👍
@classicrockonly4 ай бұрын
This makes me miss my 87 thunderbird. I just had to pop the bulbs out and that was it. Housing was a couple more bolts if I wanted it all out
@JonnyDIY4 ай бұрын
Nice! Yeah some cars make it so easy. Some mentioned you could access these by moving around some things like air box on one side
@jimig3996 күн бұрын
Thanks man. 🤟
@JonnyDIY6 күн бұрын
@@jimig399 You're welcome, happy to help 👍
@harryadavis6503 жыл бұрын
you are the man, thank you for the information.
@JonnyDIY3 жыл бұрын
You're welcome Harry! Now you've got a guide if they every go out again 👍
@vanguardcycle7 ай бұрын
nice indy shirt 💪🏽
@JonnyDIY7 ай бұрын
Thank you 🙌🤙
@robertjohnson86582 жыл бұрын
thanks..vid helped a lot
@JonnyDIY2 жыл бұрын
You're welcome, glad I could help 👍
@rodneytell5266Ай бұрын
Dont have to go thru the fender for passenger side , just pop the air cleaner box out and the flap behind the headlight , done !
@JonnyDIYАй бұрын
@@rodneytell5266 thanks for the tip, next time for sure! This was a pain 👍
@bhagmeister Жыл бұрын
GM should be ashamed of themselves. I just changed the front market light bulbs on my (new to me) ‘14 Yukon. I’m happy to report the part of replacement bulbs cost me $1 at my local auto parts store. I had to remove a total of 18 or so fasteners between grill and wheel wells. YGBSM
@JonnyDIY Жыл бұрын
Yes. I guess there's a sort of easier way to do this. A viewer mentioned removing the air box and stuff behind each headlight. Haven't tried that method as I haven't had to work on another again yet.
@bhagmeister Жыл бұрын
I just bought a’14 Yukon and found out the the front turn signal bulbs are all (4) out. I’ve never been in a car - late or early model - that did not tell me bulbs were out. UPDATE: I was mistaken - bulbs were simple side markers and not part of front turn signals….. still a bitch to change simple bulbs.
@rodneytell5266Ай бұрын
I agree , gmc , shame on u, the 05 Yukon headlight assembly was lift 2 easy vertical lock bars out and headlight assembly popped out
@basilyousif30772 жыл бұрын
None of these videos show what the other light bulbs are. I'm going to change them all if I have to do all that to get to the back of the headlight body.
@JonnyDIY2 жыл бұрын
Good point! You may as well! 👍
@rodneytell5266Ай бұрын
Why in the dark dude ?? Why ?
@JonnyDIYАй бұрын
@@rodneytell5266 had to, was brought to me night before they were leaving on a trip 👍
@countryboy86432 жыл бұрын
alot of bolts just to get to the bulb smh..
@JonnyDIY2 жыл бұрын
It really is ridiculous, manufacturer should be ashamed
@maxscriptguru2 жыл бұрын
Why did you film this at night? Black car at night: could barely see anything in your video.
@JonnyDIY2 жыл бұрын
Sorry customer needed it next day for a vacation trip and brought it over after work
@sethstieghorst79455 ай бұрын
I saw everything pretty clearly now I've got to do the same thing to my truck
@samsteele4650 Жыл бұрын
No socket or wrench size.....thanks for the help
@JonnyDIY Жыл бұрын
I mention all sizes used in video, I believe 10mm and 7mm that's it 👍
@JonnyDIY Жыл бұрын
Also someone mentioned if you remove air box on passenger side you can get to bulbs and drivers side if you remove winshield washer reservoir you can get to them too. May be easier for you 👍
@matt-qb8zb2 жыл бұрын
How the fuck did u just pull the light out like that
@JonnyDIY2 жыл бұрын
Lol it was a pain. If you read a comment few down from mrfunkington he mentions how to get to bulbs without removing lights as I did. May be worth a try 👍
@zachgreene5286 Жыл бұрын
I can't just "push the tab, and pull out" mine is stuck. Fuggin up my fingers
@user-nl4mk3qp3f Жыл бұрын
I swear mine have no tabs to push and release the bulb.
@zachgreene5286 Жыл бұрын
@2K mine ended up having this like safety plastic piece in the middle I needed to pull out to release the bulb