NOVRITSCH SSG-10 Review after 3 Games

[@zzzzzao]

Fall to the ground test: Check.

[@scarecrow5927]

check, check, check......oh and check

[@mikefoster5663]

Just ordered SSG10 A2 with extra mag. Can’t wait. Like a kid waiting for Christmas.

[@plebb1096]

I just ordered mine too. My first personal purchase.

[@JoseAntonio-pb7nd]

How is the ssg10 guys?

[@oliverjensen9205]

Jose Antonio it’s super good, I have an ssg10 a1

[@X-Tech24]

Just ordered mine. Can't wait to try it out

[@JoseAntonio-pb7nd]

How is the ssg10?

[@RootedByKali]

Jose Antonio go on his channel there’s a lot of vids of it

[@tehvaris132]

I just watched ur review 👍

[@Cruser1068]

My SSG10 A2 arrived yesterday and I had an unexpected and pleasant surprise. This is my first foray into sniping. I usually run a Marui HK416 Delta Tan recoil shock and I wear a WARQ full face helmet. Aiming can be a bit awkward but I love the helmet as it never fogs up unlike every pair of goggles I've ever tried. I mount my Reflex sight on a 45 degree mount and it works. However, I was dreading how the sniper would handle and had resigned myself to not using the helmet when in sniper role. But.......on the A2 stock, you can remove the adjustable cheek piece completely....this allows the helmet to sit perfectly in the space it creates and my eye is lined up with the scope perfectly, no tilting, no drama. It's a perfect sight picture and very comfortable! I cant wait to try it out on Sunday.

[@henktencate5740]

A little bit late :p but i use a warq helmet for the same reason and i already thougt about buying the a2 stock because of the removable cheeckpad. I was not 100 procent sure if it was possible to remove it but now i know it for sure. Thanks :) do you still like the sniper after 2 years?

[@RKDownTime]

My son wants another brands rifle for Christmas. I made an executive decision and bought him the SSG-10 A1. He's 12... and the kid can break a bowling ball in a sandbox with a rubber mallet. We'll be stress testing the crap out of it. I hope he loves it. This video helped me make my decision.

[@kaylofficial.]

You are a very sympati dude Josef!!

[@Just_Dennis]

I have ordered one, and I am really excited to try it out 👌 Edit: its really good 🥳🤩

[@Just_Dennis]

@Grady Betts never accually had any problems, i just use the weight that's recommended for the spring I have in my rifle

[@Just_Dennis]

@Grady Betts I really like it, shoots like a laser, and always hits straight on target.

[@Suhdudeb]

I know you have disclaimers in the description, BUT! I don't know how much I can actually believe in a review from someone who works for Novritsch :D It's a nice gun tho!

[@JosefMucha100]

you cannot trust anyone you don't know. Use my input as you like. :)

[@patrikrusinko]

Oh this video was great. Love your honesty and your attention to detail. Good job boii

[@conter888]

Paradny channel, vdaka tebe som sa rozhodol zacat hrat 😀

[@onepunchairsoft]

Holy crap I love the brutal honesty of your videos. The gun falling off the table caused me to audibly laugh in my office accidentally it was so unexpected.

[@alt666]

i sort of want to put the ssg 10 upper on an l96 lower...

[@GruelingFive8]

Aged like fineee wine

[@MettFox]

Pepo skvělá práce, s Chrisem tvoříte perfektní tým. Snad tě někdy potkám v terénu a pokecáme.

[@jago5300]

My trigger spring broke online. After practicing with it for 2 weeks. Was sent the new one in the gun shoots fine. But I do get a lot of left and right and up and down shots depending upon the weight of the beating in the hop. Even when I dial it in it's not what I expected. Granted I'm looking for gold. And looking for the 300-foot shot of consistency. I've been using the .49 oh, and they do help a lot. Practice makes perfect.

[@denizcankaya8277]

Hey Josef thanks for the review, could you tell which gbbr do you show in the video? Im new to softair & dont know what to choose! But definitely gbbr

[@J_Holbird]

I will be making money again in the summer as I cut grass. Can’t wait to get this sniper and now watching this i am even more excited.

[@Uria-jz1gu]

buy a tac, youll find version at the same price. Its just a superior platform.

[@CubeESP]

I was like: Wait when I purchased the SSG10 this guy showed up in a GIF hahahah

[@tomasteply1956]

That "yeah" after trigger was the same like ganand thumb's :D

[@radekkarmasin6505]

Velmi dobrý nápad vrátit se k 6.01 hlavni. Podle mě o jedno mínus méně. A ten hopup systém je jen třešnička na dortu. Velmi podobné, řekl bych až stejné jak hopup u AK. V jednoduchosti je krása a tohle je velmi povedení kousek.

[@radekkarmasin6505]

Už mám docela srach až to na mě bude mířit v Ketkovicich 😀

[@asbjrnahle824]

Dude, love your content, keep it up

[@Qrwa12323]

The king died, long live the king

[@sergioaraiza3653]

that reallllly helped me thanks

[@christoskolytoumpas6927]

I'm also having my research on ssg10. I had the chance to shoot some bbs with one. 100% stock (even bucking) 460fps version. It's crazy stock. Imagine going on a cheap vsr platform, buying upgrades with a final cost of >500€\$. That's what ssg10 gives you with much less. People cry about price, claiming it's expensive, not worth and needs upgrades. My honest opinion, the only upgrades I would use is just a 6.01 ZCI stainless steel, and maybe a TDC hop up unit. But out of the box it's just amazing and it's worth EVERY SINGLE CENT.

[@kona6812]

Thx Josef, will be a GBBR the next thing after the Novritsch AEG?

[@JosefMucha100]

Not exactly but at some point it will probably come.

[@kona6812]

@@JosefMucha100 Now waiting for the CO2 magazin for the SSX Project 😁

[@ErgonomicChair]

Don't get anything from Novritsch, everything he sells is just rebrand and marked up cheap guns. SSG24 is the "best" thing he sells and it's just a Modify M24x, the Modify USR150 is $30 cheaper and so much better than the SSG24. SSG10 is nothin gbut a JG BAR-10 with a bucking in it. If novritsch got into GBBR He'd likely do what he does and pick something shitty and old like the KWA piece of shit LM4. Which is complete shit. Just pick up something good, a VFC M4, Vipertech M4, those are your best bets. Other good buys are the VFC UMP45/9, VFC MP7, TM MWS. You can get a WE but I only suggest that if you are willing to buy a ton of upgrade parts otherwise you will be replacing triggers and hammers and parts out. A WE M4 or MSK with a Z-Parts trigger group will last you ages. Also, get PDI-W Hold 50 degree buckings, they're better than the maple leaf by quite a noticeable margin. Maple Leaf is about the best thing you can but that's not a PDI-W hold, but... why get the maple leaf when the PDI-W is better GHK is a decent option but only if youa re willing to invest into Hephastus internal upgrades. Otherwise they suffer from the same issue WE has, soft pot metal internals. And if you are playing every single week that will wear out fast. GHK can be really good with Hephastus parts, similar to how a WE can be good with Z-Parts & Angry Gun internals. Z-Parts makes ENTIRE conversion kids for the P90 that replace the entire trigger box etc. GHK is really your only option for an AK though. The WE AK-74 has some upgrades but the trigger box itself can wear out... and the GHK have better externals. But yeah, personally I run with WE stuff becasue I like to punish myself. If I was smarter I would just invest in a ViperTech already. The best airsoft guns ever made. ViperTech are beyond anything else being made, period.

[@odindouteaux2283]

@@ErgonomicChair im gonna buy a WE PDW open bolt short barrel version for 250 bucks with 3 extra mags, do you have advice and websites wheere i can get spare parts just in case it wears out/breaks plz ?

[@ErgonomicChair]

@@odindouteaux2283 For sure! For any and all stock parts you need KY airsoft has you covered you can literally buy any single piece of any WE gun ever made from them! If you don't see it just message them and they'll get it for you. If you want upgrades to future proof and get steel parts, KY has a few but the best place (most convenient) is AST (AirsoftTaiwan). AsiaAirsoft often has WE upgrade parts from RA-Tech, Zparts, etc as well. Also Tiger11, hobbyking, carry a lot of WE upgrades.

[@dziugasmorkunas9424]

your videos are very useful, please continue.😀

[@a.freeland179]

Your durability testing is legitimate. Haha. Did your run camera survive? Keep up the great work, can't wait for the MR.

[@FallDxvdbl]

Will you do a video on your most up to date set up? Which GBBR your using and the gear? I just bought the WE PDW and i'm waiting for it to arrive!

[@cactioperator8709]

He says he is biased tho in the description (I'm still buying one tho)

[@ErgonomicChair]

Don't, it's just a JG BAR-10 with some aesthetic changes. Get a JG BAR-10 for $200 less and put a PDI-W Hold into it. Will shoot better than the SSG-10.

[@cactioperator8709]

Yeah, I changed my mind since I made that comment. I learned more about his stuff and I really don’t believe in his products anymore.

[@ErgonomicChair]

@@cactioperator8709 Whew! Good good, I tr yand save people from the Novritsch rabbit hole and tell them they can buy either better, or the same thing for cheaper. A guy I know quit airsoft because of his SSP1 always busting and then his SSG24 was getting outshot by my GBBR and my shitty little AEG and I tried explaining to him, it's all in the bucking. He was really upset he paid that much to under perform.

[@cactioperator8709]

ErgonomicChair yeah you’re a good person for trying to help people. Most of them dont know better and that’s now nov makes his money. I saw his vid on his new aeg and saw everyone in the comments really exited and I feel bad for all on them

[@ErgonomicChair]

@@cactioperator8709 For sure :/. I am trying to direct people to better AEG's. I really only try and dissuade new people, the "veteran" airsofters will ignore anything you say and have bought too much into the koolaid. From what I saw his AK looks like a Krytac almost, and I am betting it'll be a good $150-200 more.

[@thomastk1970]

Got tha A1 and i love it running it with supresser and gun cover a bit Long but kills great

[@Tůmič124]

Mohl bych se zeptat, je nějaký velký rozdíl mezi tím když tam dáš tlumič?

[@donavan0404]

Sup man !!! I myself run a SSG24 and I've seen enough to make me want the SSG10 however are there any parts interchangable between the two ? Other than accessories.

[@YS-je4sp]

internals are not cross-compatible

[@JosefMucha100]

Thanks! No, it's two different rifles.

[@donavan0404]

Ok cool, my next question is since the ssg10 is VSR compatible does that mean I can slap the ssg10 upper assembly into a VSR10 M40A3 lower stock ?

[@miikmar]

@@donavan0404according to nov, yes, since he told ssg 10 is full vsr10 compatible. Looking allso for nice wooden stock for mine ssg10, when it someday arrives.

[@willieaway]

Have had a ssg24 for 2 years, a big fan of it. Also have a SRS with heaps of upgrades, like lighter weight and quieter srs. Ssg24 better for bolt pull and harder wearing then my srs. Looking at the SSG10 A1 as a quiet light weight accurate combination.

[@bikebudha01]

This gun can be ordered with (4) different Joule levels (1J, 2.2J, 2.8J, and 5J). Can someone walk through the differences and why you'd choose one over the other? Thanks...

[@IceElias]

I will Go for the 5 joules because i want that extreme power for training my aim and for shooting at things

[@bikebudha01]

@@IceElias I just got mine. The 5 joul spring is VERY stiff. Tough to pull back with one hand. FYI...

[@FalcoINC]

@@bikebudha01 really? its that tough? I see people do it all the time? I was thinking about getting the ssg10 with the 220 spring to plink in the back yard. do you have toothpick arms?

[@bikebudha01]

@@FalcoINC I bench 275, so no, I don't have toothpick arms. But in most of the sniper videos you'll see the sniper with the gun up against his face, then slowly pulling back the bolt with two fingers between shots. The 5 joul spring that came in mine was so stiff I had to unshoulder, put the but of the gun against my thigh for leverage, then pull the bolt back.

[@FalcoINC]

@@bikebudha01 Lol I get what your saying I just feel like it shouldn't be THAT hard to pull back. Maybe it just takes some breaking in? If you watch some of Novritsch's videos where he's using the heavy spring to explode cans and stuff he pulls it back easily with one hand. Have you tried disassembly to check if there is something causing unnecessary friction or something?

[@Uria-jz1gu]

A big advantage of the ssg 24 over the vsr is for me, the third screw that is directly holding the barrel, contrary to the vsr 10 platform, where the barrel is only held in place indirectly via the hop up chamber. Over time you gonna have some play on the barrel, which is super bad for accuracy, no matter which fancy barrel/nub/rubber you gonna use. No matter how good is the barrel/receiver quality, it will happen (i have 2 vsr, one with pdi external, one with stock external and they both suffer from this issue). Thats why now my main rifle is the srs, and thats why i think that if the ssg10 doest have this third screw, for me the ssg24 is better.

[@johnfaustus1]

Do you have a TM VSR-10 or one of the clones (like JG BAR-10)?

[@Uria-jz1gu]

@@johnfaustus1 one tm and one custom made. I still stand with what I said : Novritsch should have stayed with the ssg 24, maybe it would have help the industry to move away from the vsr platform. The vsr platform is not the best because it’s the best platform in it self, but because the industry/community has developed through the age the best aftermarket parts (especially on the hop up part). The industry make almost only aftermarket parts for the vsr because people only buy vsr, and people buy vsr because this is the most supported platform. At least silverback has managed to make the srs/tac a real (and for me the only) alternative platform.

[@johnfaustus1]

@@Uria-jz1gu I agree - it does seem like a self-sustaining cycle we've been in with the VSR. I've heard good things about Silverback products - they are next on my purchase list.

[@bikebudha01]

Which is quieter: SSG-10 or Tokyo Marui SR-10 G spec? (they cost the same, which is better???)

[@DeadShotAirsoft]

Hey man, great video nice in-depth detail. Looking forward to the 24 Vs 10. I was just about to email you, I have a quick question. I'll be ordering the A1 Thursday week have ye alot in stock or will there be a second batch being made soon?

[@arteon6366]

Is the stock hollow like on a VSR and BAR 10?

[@Eljanes123]

can u make a update on the ratech trigger group? love the vids keep it up!

[@JosefMucha100]

I'm not investing into WE ratech triggerbox. At that point you can just buy VFC or GHK which I did. VFC review will be next.

[@syndicatesabot470]

you should do a throwback and bring the l96 out to the field

[@danielp4206]

Where did you get that pull tab for the magazine?

[@jonaschandler8039]

With how much joule should you get the ssg10?

[@jemboycabrella4641]

how can i order ssg 10 to the philippines?

[@jedisurfer9591]

I am looking for a sniper springer for garden plinking with my kids and I want a rifle that is quiet and just works without problems. The SSG10 seems to fit the bill. I would like to mod it to have iron sights though... Does anyone have any advice regarding whether this is achievable.

[@limm3039]

It comes without a scope so you can buy any sight that can be attached to a picatinny rail

[@Ruben1994OL]

If you're handy, I suppose you could cut a picatinny rail, weld it to a kind of clamp to clamp around the end of the barrel, for front sight mounting and buy some cheap iron sight sets off of ebay. Just make sure the front picatinny is relatively well lined up both horizontally and vertically with the rear picatinny over the receiver, and you should be fine.

[@barbatatica1988]

Hello there, Nice Review dude.. like this

[@graysonkusibab_0766]

Does the ssg10 come with a scope

[@nicholasrankin9926]

I have one question, does the scope work well from the start, or do you need to tune it or adjust hopup, im very new to airsoft

[@JosefMucha100]

You always have to adjust the scope but it's very easy. No need to be worried about that.

[@tehvaris132]

Idk about josefs bias but Idk if it has a hollow/cheap feel because the weight but the price is great so

[@radejet]

Josef get your self a Army Arment R36 , its a very good GBBR gun.

[@JosefMucha100]

Sorry, I don't like the looks of G36.

[@rqairsoft4541]

I just got my SSG10 today and the bolt pull is pretty scratchy. I was wondering is this would go away as I use it more, or if this is an issue. Thanks!

[@ep_aesthetics5917]

RQ Airsoft how does it shoot?!

[@rqairsoft4541]

EP_Aesthetics it shoots fine performance wise, but it’s just a bit scratchy.

[@ep_aesthetics5917]

RQ Airsoft id email the novritch team

[@rqairsoft4541]

EP_Aesthetics Ok thanks for the help!

[@ep_aesthetics5917]

RQ Airsoft no problem! Would like to see a ssg10 review!

[@patopato9668]

"Dune is better than perfect"...you got me dude, nothing more to say

[@doanh6499]

u cut both side of the T piece (where it contact with mag) enough to fit a small oring, there gone your dropping bb problem.

[@danielofner9218]

How much joule do your gun have? 2.2 or 2.8. Is there realy this much difference between this both types? On an airsoftpark nearby, Bolt Action weapons ar just allowed to max. 2.7 Joule. Is there an way to bring the 2.8 Joule SSG-10 down to 2.7 Joule? For example with an Suppressor?

[@Cruser1068]

I've not done this and am no expert but sounds to me like you should buy the 2.8 and fit the optional Air break pins. This will make the gun much quieter and the downside (for most people) is it will reduce FPS a little. I don't know exactly how much but by sounds of it should be perfect for you as it will likely drop it down just below the 2.7. Post a message to Novritsch and ask if this will work.

[@JosefMucha100]

Get the 2.8 and cut the spring. That's what I would do.

[@danielofner9218]

@@JosefMucha100 I'm not sure but are airsoft weapons always min. 0.1 Joule lower then there are declared?

[@whitefox2909]

Ahoj Josefe, rozmýšlím si koupit od vás SSG10 A1 a chci se zeptat jakou pružinu jsi při ničení (testování xD) používal. Už mám od vás takticky pás a jsem s nim spokojený.

[@mikaelsacchi]

Thanks for sharing but how does it shoot? range? meters?

[@michalchromy3507]

Ahoj, skvělé video. Měl bych dotaz - je SSG10 A1 kompatibilní s pažbou MLC S1 přímo od Maple Leaf nebo je pažba verze A2 nějak upravená? Líbí se mi verze A2, ale chtěl bych ji v olivové barvě a nechce se mi kupovat verzi A2, pokud bych stejně pažbu měnil. Díky za odpověď a přeji spoustu krásných airsoftových zážitků.

[@JosefMucha100]

Ahoj, diky! Je lehce upravena aby sel trigger box do ni a tlacitko zasobniku ma kovovou vlozku. Mela by jit ale upravit v pohode.

[@michalchromy3507]

@@JosefMucha100 Díky moc za odpověď a přeji úspěšný rok 2020.

[@henriquedasilva3037]

I have the A2, would actualy a maple leaf vsr10 hop up chamber + ml crazy jet be un upgrade or? :D

[@JosefMucha100]

I think it would only make you feel better. That's it.

[@OverdriveTech]

Yeah, still here

[@ruv3n406]

When will we get to see some gameplay?

[@trapdoorspider9211]

I hear what your talking there dude you can hear the ring from the 24

[@rageingmachine9627]

How do you feel towards GHK's gbbrs

[@JosefMucha100]

One of the best options, but I chose VFC. Video coming up.

[@willhahn3380]

What range would you say it gets? I'm selling my sniper to get it and everyone says "It's so accurate" but what about range??

[@Pietblues]

Ordered :)

[@greg.gallmann3001]

Is it good? Like when you aim the crosshairs, does it go where it’s aimed?

[@Pietblues]

@@greg.gallmann3001 just perfect out of the box, no trouble from my side, works as intended. 0.46 gr BB used. (SSG10 A1)

[@greg.gallmann3001]

Pietblues thanjs

[@lukasfekula2350]

@@Pietblues 2,8 or 5J?

[@Pietblues]

Meant to be played. Great Gun, light weight, precise and reliable. No complains, ooB ready.

[@dakoshako]

Ahoj, jaký máš prosím tě scope na té A1?

[@Mitistefan]

Why is everyone still use ssg10 now if ssg10 is that good?

[@FallDxvdbl]

What was the gbbr at the end of the video?

[@SlavenTopG]

Can I mount the Rifle Bipod for 37€ (from Novritsch shop) on SSG10 A1 without any additional parts? I can see that its compatible with the rifle, but not 100% sure it can be mounted on the rifle without any other part? thanks guys, I'm new into this so any help is welcome!

[@JosefMucha100]

Yes there is the bipod stud.

[@xcontrol3741]

Do you have another channel with more subs?

[@JstNebula]

dude this sniper rifle is epic

[@thesheep_yt1544]

Which is better the ssg-24 or the ssg-10 A2

[@JosefMucha100]

for me, both are nearly equal but the SSG10 is newer. I like SSG24 mags better though.

[@BjornHub24601]

Josef, ive never owned a GBB rifle , what are they like? i live in UK so im guessing weather shouldn't be a problem

[@JosefMucha100]

Way better than anything else if you ask me. GBBR is a new world if you have never used one before (or realsteel one).

[@BjornHub24601]

@@JosefMucha100 I have fired real steel, I just wondering how consistent they are due to temperature changes and what I should look out for when planning to buy one

[@JosefMucha100]

@@BjornHub24601 they are fairly consistent in my opinion. WE is the worst when it comest o low temperatures, VFC and GHK are superior and also more expensive. If you can afford it, get GHK or VFC (as for the model, I have experience with AR15 so that's what I would recommend at the moment.)

[@patrikszabo780]

Can you buy a microphone shock mount? this sound is soo anoying but easy to solve. Anyway this is a good video ;)

[@mikemegadeth4110]

Done is better then perfect?

[@adamklasovsky3289]

Ahoj jak moc je ta ssg10 lepsia od ssg24 pretoze moja ssg24 stala o mnoho viac a to je dost na nic.

[@JosefMucha100]

Realne je ssg24 srovnatelna. Obe funguji dobre a jsou presny.

[@Mrpivot34]

Uggh, i'm THIS close to buy the SSG10 with a scope... Do you know if we can buy with multiple payments ?

[@ErgonomicChair]

DUDE save your money... get a JG BAR-10, it's the SAME GUN without a few external modifications. Get the JG BAR-10, buy a PDI-W Hold bucking. Then pick up a few EdGi or PDI modifications in a year or 2...

[@Mrpivot34]

@@ErgonomicChair to be quite honest with you the main appeal of the SSG is that it's already pretty much upgraded soooo I'd need to check what upgrade i'd need to make the JG be on par with the SSG10

[@ErgonomicChair]

@@Mrpivot34 To the same as the SSG10? Just the bucking if you don't include the aesthetic changes. Other than that there are no actual upgrades beyond a few tiny inconsequentials that don't end up improving anything. To make something better than the SSG10 though? EdGi or PDI Hop up Chamber,. PDI or EdGi steel trigger set. PDI-W hold bucking. That's it. You can get a PDI, EdGi, or Lambda barrel too and it is that much better. EdGi and PDI unlike Novritsch actually are engineers who have tool lines and put in tens of thousands of dollars into R&D. There are many, many, many guides about upgrading the BAR-10 with PDI/EdGi/Lambda parts. Angry Gun I believe makes a few bits too. The biggest upgrades are the trigger and hop up chamber. PDI makes a 2 armed hop up chamber that is the closest thing to precision hop up adjustments that exist in Airsoft. The main reason I am warning you away from the SSG10 is how... shit condition they are in. I've had to outright rebuild one for a guy local here, screws weren't screwed in, the gun case it came in was smashed to shit even though the shipping box was fine meaning Novritsch put it into the box destroyed. And I've seen pictures and reports of other people seeing the exact same thing. I've had to work on two of them so far. Both had loose and wobbly chambers. So my money is on Novritsch simply knew Mucha was going to do a video review on it and gave him one of the quality assured SSG10's. Like seriously, the one I had to rebuild with EdGi parts ($300 so, pricey, but the best thing you can get next to PDI imo but other techs argue EdGi are better. Tbh, I think they are pretty even but PDI have some features that are just on another level!) - - the cylinder didn't have its nozzle secured to the gun and among other issues like the trigger was wobbly and not pinned correctly. The Entire thing was a mess, whoever assembled it left so much unsecured and the inside fo the chamber was scratched so they actually TESTED it and tried to bolt it. There was a set screw inside that wasn't fully in and it was scoring the shit out of the interior. That SSG10 was a nightmare. The other wasn't nearly as bad but the entire chamber wobbles and barrel assembly so I had to get creative and make a few extra screws to hold it down into the stock... The SSG10 is an embarrassment in my eyes. And I am not stranger to budget guns! I use a lot of WE GBBR's, hell WE have really fantastic engineering but they just use shit materials to build their things so I enjoy them design-wise but... yeah. So I know and I use budget guns. But the SSG10 is not a good buy.- I cannot caution you away from buying anything from Novritch hard enough. Even the SSP because all the SSP is, is the old out of date KP-05 IPSC. Which is inferior to the modern KP-05 which has more steel internals and a TM compatible hop up chamber along with an upgraded back safety. This is why the SSP's back safety busts so often and you can't change out the bucking easily. Because the bucking is nothing but a purple-dyed stock KP-05 IPSC bucking. Like that's the issue with Novritsch. He doesn't build a single thing he has no engineering degree I could find either. The SSP is nothing but the KP-05's base, with the KP-08's dust cover (grips), and the KP-06's top slide. But he just licensed the old out of date KP-05 so it's all trash compared to the new KP-05 and it's like $150 more than a KP-05. So it's like, why could you buy; - SSG24 when the Modify M24 USR150 ischeaper and more modern/upgraded - SSG10 when the JG BAR 10 is so much cheaper you can use the money for BETTER ugprades - SSP when the new KP-05 is superior in durability and upgradeability - SSX23 when the MK23 it uses is only worth $50 USD with a Hadron TDC hop up $15 and a Maple Leaf bucking $8? Actually, there's some merit to the SSX since the MK23 it uses (the name escapes me, it's not he ASG but it's the other one. Not TM) are very hard to find in North America. So it's overpriced but they ARE hard to find at least. THe only thing worth buying in Nov's shop are his SSG24 magazines because they're better than some of Modify's magazines. Though the new USR150's magazines are better, and they have built in LED's for tracers. ANd they are cheaper... Novritsch is just kind of a shady guy who sells extremely marked up and old guns that companies no longer make. KJW doesn't even support the old IPSC KP-05, Modify has moved on to the USR150, the JG BAR 10 is still made but there are better more modern versions of it out there too. Some JG BAR-10's come with the exact "upgrades" the SSG10 has except bucking. But even then a PDI-W Hold bucking is better than the autobots. They are at least competitive with each other but the PDI-W hold is objectively better at the end of the day and doesn't ask you to get a concave bucking.

[@helisoma]

@@ErgonomicChair no 25 year warranty tho

[@ErgonomicChair]

@@helisoma Try and take them up on that warranty. Welcome to 6-10 month long wait times as they wait for their suppliers to send them factory OEM CYMA/JG parts, or them simply stating "there's no ETA" on replacement parts. KJW focused on the KP-05 and stopped making KP-06 and KP-08's for awhile and NO ONE could get a SINGLE back safety or trident spring for the SSP1. I had THREE customers waiting for faulty parts to be replaced for the SSP1. I have videos of the JG BAR-10's I've had to fix because Novrtisch offers ZERO support. That 25 year warranty is the most bullshit warranty I have ever seen because he has ZERO ability to honour it.

[@Licmebro]

Just wondering what joule do you recommend for the rifle.

[@JosefMucha100]

That depends on your field limits.

[@Licmebro]

@@JosefMucha100 thx for the info

[@kilianjp9682]

Since you work with Novritsch, you should do a SSG10 GIVEAWAY, and let me win it;)

[@nunmuchhere508]

you mean let me win it

[@themorningstar6901]

no me.

[@FR13NDS_ALEXIK52]

What gram bb goes in the ssg10

[@helisoma]

it thrives with 0.46g bbs...you could run 0.32g but it's just a matter of lighter bbs being more susceptible to cross winds

[@carsoncowling4510]

What should I select for joules like 5, 2.8 and so on

[@joshstringer8181]

BiGeThMaCdOnAlD C 5 is claimed to jet 700fps which I’m pretty sure is illegal at most fields

[@carsoncowling4510]

Josh Stringer alrighty thanks so I will just choose the next one down. Thanks

[@ghosssty]

dude that scope on it... it hit floor so hard xD is it still holding zero ?

[@mikemehevicjr8831]

You would be surprised at how well scopes hold their zero. Depending on quality of the scope obviously. But I dropped .270 out of the tree I was deer hunting in, got down, went back to the cabin (because I didnt want to risk my scope being off and wounding the deer) and low and behold, I went out back fired one shot at a target and it was still dead on at 100 yards

[@JosefMucha100]

Yes no problem.

[@jdawgvlog3619]

U bought ur subs?

[@mrhelp5394]

Wut

[@nathankay]

I spent this entire video worrying that the guns were gonna fall over :D

[@adamcook8564]

May I ask what scope that is please?

[@Cruser1068]

Looks to me like the Novritsch scope. 3-9x50mm, Illuminated Reticle. It's fitted here with the scope extender and a Runcam scope cam.

[@JosefMucha100]

novritsch scope. Works just fine.

[@kendia1811]

What's the real steel counterpart of these?

[@joshstringer8181]

Ken Dia the a1 is said to be based of the m700 but I don’t know about the a2

[@JGSnipes]

A2 is a modern m40 variant

[@razbiton173]

I was hyped for that gun and the price, just to face that in my country- israel- that rifle A1 version costs 1080 euros , sold only that overpriced importer of novritsch here.....

[@helisoma]

it's not that price anywhere i've seen...try moving

[@moboots]

Id use it too if i got it for free🤷‍♂️

[@Theo-vy8dj]

Bro why do you have a salt lamp

[@JosefMucha100]

for different lighting. Make it look a bit better. That's it.

[@Theo-vy8dj]

@@JosefMucha100 ok I approve

[@slzslz]

A review from an eomployee. Defenetly not biased.

[@vladimirpapes1013]

česky Josef

[@-COBRA]

nikdy som nemal vsr-10 a ta vypadavajuca gulicka ma fakt sere. to je jedna z veci, co mi vadila aj na aeg. Pridávať niečo na zásobník, aby sa dal vybrať aj s rukavicami? Myslím, že sú na trhu lepšie systémy, tak prečo to tam mapleleaf nedalo. Inak uprav si osvetlenie, veci na stole nie sú dobre vidieť, daj si tie svetlá na úroveň kamery.

[@Eljanes123]

what gbbr did you hold up?

[@JosefMucha100]

VFC Saber (AR15). Fully upgraded with custom parts. Video coming up and it's gonna be interesting.

[@xcontrol3741]

You should have more subs

[@Tizian001]

It's dangerous to keep the M4 on the shelf over head, when all guns tend to fall down ;)

[@JosefMucha100]

I put the shelf there. It's safe, trust me :D

[@diegocastillogutierrezrave1034]

Ssg24 or ssg10 ?

[@miikmar]

As for 299€, ssg10. Much better value than ssg24. Ssg24 price comes mostly for custom parts made especially for it, example really solid stock. Ssg24 is good gun, but for 299€, there is no question that ssg10 is winner.

[@ErgonomicChair]

I had a guy bring an SSG10 in. The barrel, chamber, etc all wobbled. I wouldn't suggest or recommend anyone getting it.... the JG BAR-10 is cheaper and the same quality. I assume Josef got one that was abctually quality controllled... but yeah so many people here are getting SSG-10's that have a wobblign loose chamber, scratched cylinders, sub-par compression parts compared to the stock VSR-10 or JG BAR-10 Maybe if Novritsch actually quality tested them to the standards of this one sample model. But they are leaving the factory shitty. Even then, the JG BAR-10 is a cheaper an equal alternative. Do yourself a favour, pig up a BAR-10, put a PDI-W hold bucking in it. Profit. If you want an actually super good VSR-10 look into PDI and EDGI kits. They are superior to anything Novritsch rebrands. And yeah novritsch doesn't make anything he just rebrands shit btw. PDI and EdGi have also fixed the "BB's always fall out" thing. Pretty simply too. Again all the SSG-10 is, is nothin but a JG BAR-10 rebranded with some aesthetic changes. PDI-W is superior to the Autobott 100% and I've been putting both of these in customers' guns for ages. Autobott doesn't come close to PDI-W Hold.

[@helisoma]

I've received two SSG10s in the past year and neither had the issues you mentioned, and i also took both apart...anyone who looks at the internals can tell it's not a rebranded product

[@ErgonomicChair]

@@helisoma What the hell are you talking about? You're outright lying, several internals on the SSG-10 are BRANDED with JG item numbers and product codes... have you never tech'd before in your life? You're completely lying. The SSG-10 is a JG BAR-10, the rest of Novritsch's products are ALL REBRANDS he does not have a factory, they do not have a production facility. They outright and completely lie about that. Hence why he lost the licensing fo rthe SSG24, because Modify was pissed off Novritsch claimed HE ENGINEERED IT. He was not allowed to make that claim. So once the license ran out, Modify didn't renew it. It's also why Modify broke their deal and began selling the Modify M24 USR150 in North America and Europe (which has actual internal upgrades btw) when Novritsch only had a license for the M24x which was the Taiwanese version, but he put a 150 spring in it. HENCE WHY IT CAME WITH A LOW POWER SPRING. Even Dayton from house Gamers has gone on camera and said Novritsch is just rebranding, even Airsoftology has stated that the SSP1 is just a rebrand though he didn't state it was a KJW but he said "Novritsch would be angry if I told you the gun this is..."

[@Peyton.Hagarty]

What’s the range difference

[@comradecatos6711]

if the ssg is so reliable then think if novritch made an AK

[@philbivins7133]

This will give TM VSR a run for it's money...price point about the same..

[@joshstringer8181]

Phil Bivins i think it’ll do more then give it a run for its money

[@Rocketrymandan]

If u want I can send you 3d printed magpulls

[@JosefMucha100]

thank you for the offer but I'm fine with a simple tape solution. I don't care as long as it works.

[@Rocketrymandan]

@@JosefMucha100 ok

[@ELCUPRA77]

Top

[@huntyairsoft5061]

yep i have a kidney for sale on ebay so I can get one of these.....

[@editzbywalt]

They are 300 bucks…

[@TheN3ckol]

Its just vsr10 from china with preupgraded cheap parts. A1 version is quite good choose for newby just to try sniper gameplay. EDIT: Its quite funny that you say "90 degrees handle out of the box". Dude, this handle comes with every bar10 gspec xD I hate novritsh marketing and making ppl stupid.

[@willieaway]

TheN3ckol just buy a jug bar 10 then and upgrade it. Been there done that. It fell apart internally and now it has a Wolverine hPa unit in it.

[@TheN3ckol]

@@willieaway I have full custom 1300$ vsr already :D Im just getting nervous because of that bullshit