Got the new RC4wd Edelbrock v8 accessory set, so I needed o put a V8 in something!, lol The C2X Gets V8 swapped! store.rc4wd.co... Check out my Amazon influencer store page for some of these products; amzn.to/2NMKTtX
Пікірлер: 41
@JMLUSA12 жыл бұрын
HOLY SMOKES!!!!!! Stumbled upon your Channel after looking for a scale C-10 Chevy truck build. WOW! Incredible detail and realism!!!! I love you shop set up and Will begin the steady stream of your video content! I was looking at replicating my Hot Rod 84 Chevy Stepside! Now I have hope I just might be able to do it in scale and with Far More Detail! Then, the scale 1930s Dirt Track Race Car is next!
@michaelhoyle32663 жыл бұрын
If you decide on the headers, maybe open headers coming up through the hood to go with the hole you already chopped in the hood. Maybe some oil smoke weathering from the exhaust on the cab to go with it. Just an idea.
@SwampersRC3 жыл бұрын
Zoomies!
@stephendavies2514 Жыл бұрын
This is going to piss you off lol. The servo position issue is one of those so easy you miss the fix problems 😮. The fix is moving the servo mount to the bumper mount position. Add a spacer to the side that the shackle screw interferes with. Flip the horn 180° and viola fixed😊. I pondered the problem for about a month before I sat down and stared at it for about 10 minutes and realized that this was possible lol. But there's your fix because the front bumper mount isn't needed on the k5 blazer. Good luck and Peace ✌️
@adamb74263 жыл бұрын
After watching you for years I have to say I appreciate the love and commitment you have to the hobby. When I built trucks in the full sized world I would've just took the hood off.. Build the inner fenders, power brake and the "Toyoda" reservoir would look great. Would have that got it running let's wheel it feel..👍
@brianwood98493 жыл бұрын
I bought the V8 dress kit the first day it came out. A little pricey, but what isn’t in this hobby lol. Thanks for the video
@andrewrichey73743 жыл бұрын
Looking awesome!!
@dbsduckd023 жыл бұрын
The details are very nice !~~pretty awesome!!👍👍👍😍😍
@SwampersRC3 жыл бұрын
The bad news for you is RC4WD just released the TCI transmission WITH the over/underdrive transfer case ATTACHED to it! TODAY! I recently built a 2wd dually on a TF2 LWB frame with the TCI(R4) transmission and an 80 turn Gool RC motor. I also used the K44 rear axle and leafs. It's called "Project Towpig", and it's much too fast for towing so I ordered the 4:1 gear reducer and I think there's just enough room to not get a micro servo. I haven't decided on what to do about a scale engine yet. I really can't afford to get the RC4WD engine but I do need more weight up front. There are some nice looking engines with fans and ducts that clip onto the motor that I've been looking at. The body is a 3d printed '86 F150 that I added 3d printed fenders to make it a F350. I might add weight in a custom front bumper.
@fishtailfistscale83623 жыл бұрын
I need to rent one or two of your garage bays. Preferably one with lift in it. Really enjoy the content and the back drop. The drill press is absolutely key.
@evilbeetlekustomscreations49653 жыл бұрын
Okay my mind is blown 🤯👨🚒 when I saw the thumbnail I thought I was looking at an actual shop I am now a subscriber and my old passion for remote control cars is re lit🔥 damn you 😂 maybe I can drive my old Traxxas rustler over to your shop with my Miss circus circus hydroplane in tow to get them serviced 👍
@BillyBigRiggin3593 жыл бұрын
The hole in the hood is a perfect excuse for a big supercharger or a cowl hood lol
@rcplaytime3 жыл бұрын
Wow that looks amazing👌💪👍
@kinslersrccustoms69453 жыл бұрын
That's is the best C2X Hilux that I have ever seen, and it is also the frist one that I seen . Now it is even better. Really nice work and we need to see it out more. Hopefully this will help it out and add some mass to the front.
@edwardbroyles97383 жыл бұрын
I agree with you, things like the plug wires are a pain!! You're already done it's a moot point but for a similar build I used gel superglue. I left it to set for 2-3 seconds & put the wires in place. I tried using shrink tubing and could not get it to stay in place
@gitan10483 жыл бұрын
I suggest to remove the hood completly and had some more accessoires i think it would improve the look of this nice motor
@alantaylor3533 жыл бұрын
That's purrdy.! 😜
@westdesertwheeler3 жыл бұрын
Badass man! Great video
@ed0c2 жыл бұрын
130$ is insane for that. would be worth it MAYBE if it came with motor as well.
@BlueDually4x43 жыл бұрын
Almost would have been easier to cram a small block in a real Toyota. The parts do look nice though.
@RyanLotz3163 жыл бұрын
So is that technically a 35ci chevy😂. Cool build man.
@andrewhall58993 жыл бұрын
Quality content
@brokencheetoproductions-1523 жыл бұрын
Cool to think that you can buy 1.10th scale engine parts
@4sixrc1433 жыл бұрын
I love your channel. Everything you do is so satisfying.
@amilcarmoncada18013 жыл бұрын
Estupendo video sobre estos accesorios RC4wd Edelbrock, V8 intercambiando el C2X, respetos y saludos desde Venezuela. 💯💯💯💯🤜🔥🤛👍👍👍🙏🙏🙏💯💯💯💯
@jgalloway5283 жыл бұрын
You should do a good scoop like roadkill put on their charger
@kevinbreaker26833 жыл бұрын
Yeah pretty awesome 🌟
@andrewrichey73743 жыл бұрын
I’m trying to find my little ranch take the bolts off of the intake, I have the velocity stat intake to put on mine can’t find that little tool to get the bolts out I have no idea what I did with it.
@NoLimitRC873 жыл бұрын
What chassis is that on could it be modified to fit the scx10.3 ive only just come across your channel you do some awesome work fair play and you've gained a new subscriber looking forward to seeing more 👍 👌
@RCeveryday3 жыл бұрын
Hi. This is the Rc4wd c2x. The v8 stuff wasn’t made for this truck but it can be adapted to a lot of rigs. Thanks for watching!
@thomastometich6767 Жыл бұрын
Wow
@thomasmerritt90413 жыл бұрын
Hey man just curious what scale this is and I would love to get into it
@RCeveryday3 жыл бұрын
All my stuff is round about 1/10 scale
@devonbolin3 жыл бұрын
Where did you get your tbirds??
@RCeveryday3 жыл бұрын
From Rc4wd.com.
@calwest70473 жыл бұрын
good afternoon to all. i have R/C truck that i need better instructions to put it together the model is a NO.C24K. does anyone know where to find the instructions? thanks for the help and have a great day.
@RCeveryday3 жыл бұрын
Here ya go. cdn.shopify.com/s/files/1/0277/4692/6626/files/C24_KIT_C24-1_KIT_Eng.pdf?v=1617861389
@Shade_tree_garage012 жыл бұрын
thats expensive for something that can be 3d printed for pennies on the dollar.....
@karenaylward68173 жыл бұрын
s..t man thats like over 400 bucks plus for 1/1O plastic motor come on man cant pay that for looks