Do you really NEED an Angle Kit to Drift?

[@Not_so_breit]

Thank god Josiah’s tip is back. Hardly survived without his tip last week.

[@BullyBreaker]

Ayo???

[@Cpt_Litty]

I love the way you structure and deliver information. It's like a drift clinic every time you post

[@FDFraceshop]

Appreciate it!

[@FrankFlatOut]

I learned how to link a skid pad with stock angle first. Then went cut and shut knuckle. After a few years of bending tie rods I went to a FDF kit. I love feeling how each mod changes a car.

[@TomMelling228]

can you do a video on trail? like how the fdf and wisefab kits have heaps of trail, so you don't need to run bulk castor to get self steer. and on how stock knuckles have less trail and some cars are really bad for it, and they need 9 degrees of castor to make the stock knuckle have any steering feedback. I come from drifting commodores (gto) and I'm constantly trying to explain to people why the stock knuckles suck for trail and steering feedback and why they need so much castor.

[@bwh32]

So excited for DMEC this year good luck Josiah

[@FDFraceshop]

Thank you!!

[@ManPedalPhotography]

Speaking of exposure… I started looking into angle kits for new edge mustangs and saw there was yours and one other brand. Then you started popping up on KZbin Channels I watch regularly (like Drift Games). Which made me look into more of your stuff. Videos like this one or when you explain things in other videos made me like you. Relatively new fan 👌🏼 and enjoy the content and knowledge!

[@FDFraceshop]

Thanks for this man! Email us with any questions for your mustang 🤙

[@ManPedalPhotography]

@@FDFraceshop will do!

[@Itskylewalker]

Man didn’t know you guys had a KZbin. Super rad stoked to hear you’re going to do driftmasters. It’s seriously the best drifting series on Earth. Formula drift would be smart to partner with them as formulandriftXdriftmasters or they are screwed. Driftmasters would be huge in the states.

[@mikehunt7857]

Good luck bro, cant wait for the weekend!

[@progressive_rc]

Have fun in Spain! I will be following the live stream. Cheers from Portugal! 😉

[@FDFraceshop]

Awesome thank you!

[@SaleenDrift]

Dude that’s so awesome! Super happy Chris is heading to Europe. 😎

[@87MustangGT5o]

So much knowledge! Beautiful mind!

[@mickflux3118]

good luck in DMGP Josiah will be cheering you on :)

[@lightmetalinc.6488]

I think your driving style should mesh well with the Euro drivers once you dial in the setup. Have fun with it. I wish you and your team all the best!

[@FDFraceshop]

Thanks 👍

[@Philsilva06]

9:49 its broadcast on their website as well

[@driftchat]

And qualifying is only on youtube or facebook.

[@OctavChelaru]

Best of luck in Spain, enjoy the show!

[@DesignEngineering]

Awesome info 🔥🔥

[@unathandavis]

I miss no episodes💪🏾

[@supertoaster94]

"Don't use tools to make drifting easier until you're good at drifting" ok grandpa, I'll torture myself uphill both ways like you did...

[@Dondrifts]

Can i slap a mantis kit on a stock 350z and just call it a day and go drift?

[@Wesselss]

What about corvettes and starting with angle kits? Every post I’ve seen the 6c and older aren’t drift able without a small angle kit

[@ImKindaPanda]

VLOG DRIFT MASTERS talk about those cars our just your experience

[@JeraldLucas-e8c]

How many angle kits are often used in drifting 80 degrees?

[@FrederickD.F]

Voyon tu t'enva au Driftmaster 😮🤘🏻 c'est fou je te souhaite bien du succès mes également bien du fun! Je vais essayé de suivre ça, c'est pas tout les ans qu'un québécois va au DriftMaster 🤘🏻 En fait tu est le premier à moin que je ne me trompe 😝

[@wallsdeepdrifting]

Flashing that Konami code. ♥♥♥

[@cobratuner]

Quick answer... No... But yes. BOOM no need for a 12 minute video.

[@Philsilva06]

11:13 do they have tire size limit or rules?

[@driftchat]

The maximum permissible tire width used on the rear axle wheels is 285mm (starting from 2025 the maximum permissible tire width used on the rear axle wheels will be 265mm)

[@thevtecnician]

Driftmasters is awesome

[@fuzzwho20]

Angle kit rx8 soon?

[@Joebobinator]

Ayy RX8 brother! The market is small right now but I'm waiting for someone to to discover this chassis. It's so good and complete cars with blown engines are going for nothing, it's only a matter of time before people realize that they can have an amazing car for way less than a 240 or e36.

[@jimmydanc]

Why is fdf better then wisefab

[@Slidelikely]

What if there isnt one made for my car 🥲