A New D8T

[@Jpaydirt]

For Hats and Calendar's GO HERE----->www.jpaydirt.com/ Check this out---- instagram.com/jpaydirt/ Old Kenny Coloring Books-------->www.amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book LOOK-------facebook.com/Jpaydirt/ Want a Tool Crown tool box go here toolcrownamerica.com/ Want to send a check to help Shane Persons C/O Anderson Construction 858 W 100 S Blackfoot ID 83221 kzbin.info/www/bejne/n3nIeWiZoZx9fdE

[@leebarnhart9725]

New D8T? You are pooping in tall cotton my friend!

[@Military-Museum-LP]

Jeff I’m not the one receiving these wonderful gifts but I swear I can feel the emotions this fantastic group of people who follow your channel. Jeff there are allot of people all over the world who really really care about you and your family. 99% of these people will never meet you ( me included) but we are indirectly part of your life. Thank you again for sharing your life. Carlo in Italia

[@idessaoutlaw]

Atom Arc makes the best 7018 welding rods.. 50 years rig welding on pipelines everywhere..🥃😎👌

[@dougstubbs9637]

The old unregistered farm truck you overtake at 1515 are something we still come across outback here in Queensland Australia, though getting thin on the ground. He is very smart keeping it to 35 mph, in those old Looselybuilts any faster and hit a bump, the front end would jump six foot, one way or the other. Left or right, no way of guessing, turn drivers into nervous wrecks. Got my trailer license in 1979 in a Louisville,903 and 13 speed bushranger. Most uncomfortable bucket of puss to drive.

[@mikeaust1698]

Hi Jeff, great video, been a subscriber for a couple of years now. Drove Cat D6s for land clearing in the late 60s in South East South Australia. Then in the 70s, worked for a logging contractor in the Tasmanian Highlands puttting in log access roads. The contracor had a D7 for loading logs and carving out the roads. For me he had a D4 dozer levelling the gravel, a 933 loader with a wonky pilot that required using the winch on Skidder to tow start it each day and an early Cat12 grader for tidying up. I was paid by the hour for my tip truck ($6.00 per hour). Most of my hours were spent driving his equipment. Spent a few years driving semitrailers on local deliveries in Melbourne, Victoria. These days drive a powered wheelchair, since I lost a leg 10 years ago. Look forward to your videos. Cheers, Mike Austin, Adelaide, South Australia

[@joelhenderson3951]

D8T is a mighty horse. I've run one many times and it was very good to me filling mud pits and ripping rock in the oil field.

[@Only-one-life-68]

Jeff You have more friends around the world than you could imagine.. We all love your videos and your knowledge but mostly your great hummer..

[@aussiebloke609]

Two minutes in, and I couldn't help laughing aloud at the "intermission" music when you stopped for coffee. Great timing there. :-)

[@alleycat1084]

I laughed out loud when the music slowed for the stop and resumed when he got back on the road! Funny as hell! Thanks for the good content Jeff.

[@-mike--m-9629]

Ha... He probably stopped to take a dump 💩

[@jimzivny1554]

Good update, great scenery during the drive. Nice deal on the tires. Nice gifts from your extended family.

[@markharvey9537]

Hey Jeff coolant on drive belts will make one chirp and make all kinds of noises. Been a Lincoln Mercury tech for 25 years. When customer wouldn't buy a new belt several of us techs found if you take a handful of floor dry and a transmission funnel and with the engine running put the funnel at a pulley that the belt feeds into you drop oil dry through the funnel and let in get pulled into the belt and pulley the noise goes away really fast. The oil dry soaks up the oily residue from the coolant and the grittiness makes the belt grab the pulley much better. Never had any customers come back with a belt chirp or noise. Love your videos. Always looking for new one. Your a great day helping out you son. I do all my son's the same way.

[@stephenwagar2663]

I Almost Fell Out Of My Chair When You Were On The Lawn Mower In The Shop !!! Almost As Funny As Being In The Blue Room , Some Time Back . As Usual Big Thumbs Up !!!

[@chriscreech716]

I have a farm tractor with BKT tires they are 9 years and look like new. Have a good week.

[@iusetano]

Awesome to see you doing tricks on the fancy equipment in the shop. Club Cadet I think it is. Excellent video Jeff.

[@pinstripes100]

Enjoyed the ride through rural Idaho courtesy of the big green KW. One thing I did notice is that in Idaho gasoline is practically free. $3.00 a gallon is cheap compared to the $1.27 a litre I paid on the way home this afternoon.

[@kengamble8595]

Hey thanks for the shout out Jeff! 😊 Think I need to head up north to Idaho, looks a whole lot cooler there, this 110 plus degree temperature is getting to be a real drag ! Thanks for sharing and take care. 👍

[@muddawgkomm9642]

Holy! Cleared the earwax outa my canals with that turbo whinding up!

[@mrmiscast]

You can tell when Jeff is in a good mood, and it's fun. Loved ID when I got to travel there. Such a beautiful state and while Jeff lives in a great place I really liked the Western side of the state a lot, as well. He's right there are a lot of good people there.

[@marshritchie4071]

Hi from New Zealand , love the Fonterra Milk Tanker model on your bench too 🇳🇿🚛👌🏼😉

[@DieselDoc78]

i am sure others have pointed it out but wanted to let you know the jamb nut for the clevis on the SwitchBlade was loose. Another good episode! thanks Jeff!

[@TheRebelOne.]

The lock nut on your switch blade turbo is loose, but then again you already know this!!

[@johnnyholland8765]

While it is just another day in the saddle for you I remember how much I used to enjoy hauling a piece of equipment on a good flat open stretch of road. Just open her up and go. Sure have some beautiful country where you are. I bought some BKT tires for my tractors and so far no problems. I think they are good tires. Enjoyed the country ride...........

[@JRRACING1327]

Your jam nut is spinning actuator shaft ( I hate when my jam nut spins on my shaft...Har, Har) Still shakin in the desert of Californication. Definitely one of your funniest videos especially the elevator music rest stop.

[@richardhalley6895]

Love your antics an love the measuring tapes 👍

[@jimzivny1554]

At 3:50 you can see the jamnut for the yoke on the Switchblade is lose.

[@skipman8yard]

Great vidj jef and that scenery is something else especially when your driving old kenney 👍😎🤟✊🇬🇧

[@Buzzbox3rd]

Bloody fun video to watch, love the close up look at the country there. Well done mate.

[@benscoles5085]

loved the ride in back, the music was perfect.

[@patwilson1056]

Just rented one for a month pushing clay material great cat like your channel, appreciate the technical information. We have all cat equipment for our pit. Expensive but great yellow paint.

[@colinporter7604]

Your jam nut is loose on the turbo, you probably noticed already just in case you missed it😃

[@mischef18]

Got ta love that tape measure bro the instructions are a good idea too. All the best from Hobbiton NZ

[@thomasmckelvey8961]

Hi Jeff, that is nice Care Package Curtis sent you, the wonder at the shipping cost evaporated immediately upon seeing that box of rod! If you haven't got a Rod Oven, find a smaller old refrigerator & wire a flood light fixture in the bottom. A 100W Flood Light will keep your rod dry & plenty hot- outside, 150Watt.

[@portnuefflyer]

I set all those multi colored siding panels on that CAT building, :20, plus a bunch of other work, with my 30 ton National boom truck. It was great work as my crane yard is right down the street about a mile. Maybe you mention it, but that big old hangar was built for the never built, or at least flown, atomic powered airplane they were working on out at the the Site, your tax dollars at work! Good to see the stop in Blackfoot, guess I'm not the only one that needs to get extra coffeed up before driving across the desert. Been craning in Mackay area 6 times this year.

[@kellykonoske91]

Dont you dare Jeff! Weve got more than our share of...Californians in Oregon, thank you very much! Todd the retired trucker.

[@cncsmith35]

I was laughing when you said Idaho was full, but my laugh went away when you said go to Oregon, because I live there and my dad is always bitchen about the Californias and keeps saying were full go to Washington😂

[@robertwhitehead5946]

Love your stuff, love seeing your state.

[@papaw5405]

My Cat dealer works out of a motel room. She sells only one part but it is the only part you need.

[@Jpaydirt]

ROFLMAO

[@evervigilant]

When you come across two trucks stuck like that aren't you supposed to dump a bucket of cold water on them?

[@scottmarshall6766]

Enjoy your D8T - run it like a rented mule, but go easy on the tyres (in Indian/UK parlance). Good video. Glad to see nothing broken this week, just 9 grand in new rubber (ouch) PS - the rod nut (jamnut) on your switchblade turbo is loose - you can see it moving in the video - better see to it before the rod end walks out of adjustment (or off).

[@waults]

Put some BKT tires on our old 79J yard loader 3 yrs ago, they are looking pretty sun-checked already. Seemed like a good deal at the time, but I'm not very optimistic on their long term life expectancy now.

[@gordonmcmillan883]

Thanks Jeff, you finally sorted me out. Nice deal on those tyres if they hold up.

[@jayhambrick]

Brings a whole new meaning to the term, "measure twice"! Lol

[@Digginok]

Pretty cool country up there, love the mountains!

[@donl9133]

Crazy small world..I just happened upon your channel..I went k through grade 3 in Carey still have a pseudo uncle that lives there and my dad lives in twin falls area and is a foreman at Idaho sand and gravel..keep up the good work

[@warrenjones744]

Wow I have not seen a Sinclair gas station in 40 years! They disappeared here in the Northeast US years ago. Tillman 750 gloves are my favorites! Lifting lugs are way cool!

[@kevendavis5812]

No Jeff we don't need any more Californians in Oregon we have too many now.

[@Brandon-wh8hr]

we are getting over run here in WA as well

[@jackbaker5284]

I used to haul radio active waste into the Hanferd,WA site thru your area for T.S.M.T.Those Nuclear Engine pics are cool, I was aware they made them but no idea what they looked like.Thanks.....Jack

[@j.b.maxwell8300]

Jeff it looked like the lock nut on that turbo actuator arm was loose on the pivot, but it may not it just looked like it worth checking (scraper no 1 )

[@grandpajim329]

😎😉😊😊 AWESOME PEAK INTO YOUR WORLD AGAIN !!!👍🤙 That country out there is really "out of this world" in places. Them "Craters of the MOON" and all that lava,,,, CRAZY STUFF !!! I remember traveling through there in the 50's and dad talking about all that strange goings-on in (ARCO) country.... I never heard about those engines AND A WHOLE LOT OF OTHER "SECRET STUFF" you are telling about.We lived in Klamath Falls Oregon then, dad was a trucker out there after the war. AGAIN "AWESOME VIDEO" GOD BLESS .🥃🥃 😍😍😍😍😍

[@ericlawhorn2280]

Grandpa Jim

[@jacobkemp1183]

Unless you do what we do in New Zealand, and crank up the injector, to make it pump out 750 HP, thens a D8 with the power of a D9T

[@swn02]

Another top notch video Jeff, some good funny bits for a laugh, your chipmunk voice made the dog bark

[@Gavin84w]

Those Cat link brackets are some of the best lifting links you will ever work with

[@woodwelder]

You can’t go wrong with BKT’s we used them in WA Australia for all our equipment 👌

[@Gavin84w]

Dont grind it Jeff, there should be another toungue available for that bead breaker. On some bead seat bands that lip that the toungue bites on had 1 or 2 raised if you like sections that stuck out further so you could fit the style bead breaker you have in and start pulling the bead back, by the time you have it pulled some and some nuts wedged in to hold it you could fit the breaker with the fatter tongue in every where and you just keep going till it breaks free.

[@frotobaggins7169]

was the jamb nut on your switch blade turbo loose? it looked like it was spinning.

[@gpf1972]

The elevator music while you were getting dinner made me piss myself lol

[@billcarp3523]

Cool tape measures. Ooh-la-la!!

[@amsimons29]

A couple of our Hermann brothers trucks run out that way Hauling lumber and equipment thru black foot and twin falls

[@halfassedmodding]

Really glad I found your channel! I just love that KW. if your ever in Roseburg with it, drop a line I'd love to see it!

[@williamfisher9803]

Buy it Jeff. It ain’t nothin but money

[@Boodlemania]

Hey those aircraft engines were developed by the good folks over here at ORNL.

[@kevincasady8992]

I delivered to that aircraft hanger with no runway once...never so happy to get out of there. That was my directions too, go west of Mud Lake til you see a huge hanger with no runway.

[@D1KHEAD808]

UPS guys busted comparing packages...

[@dozingnsloping6814]

That's funny as hell. I appreciate a good joke thank you sir

[@jackbaker5284]

Jam nut loose Jeff, Heads up!....Jack

[@soldierofdirt81]

Rockport TX... My hometown and where I spent my childhood until I left for the Seabees.

[@mepoweme]

MCB 11 1961 1963

[@cwdtransport2247]

NMCB-4, 40, PHIBCB-2, HCU-2, BeachGru-2, CBU-410 & 412, LSD-32 Speagle Grove, NATO Base Keflavik, NAVSTA Adak, NAS Rota, Diago Garcia BIOT, CBC Port Hueneme/Davisville/Gulfport, NCTC Hueneme/Gulfport, NavBase Yokosuka/NavMag Taura Cove, Navweaponssta Yorktown, Navairsta Cecil Field. ChiefD

[@fowletm1992]

We run loads of bkt tyres on the farm They make the odd size flotation tyres to replace trellenborg Better quality than trellenborg as well Use them on our scraper as well

[@ernestdougherty3162]

Great video funny and awesome

[@mattwesley4435]

What do you do ?..excavating?..do you own your own company and all the equipment you show?

[@joecrowder2248]

I was watching Cunningham out in OKLAHOMA work on his AC condenser and realized he could use one of them there fancy tape measures you got

[@dcw1540]

I think that guy on the mower lost it Jeff.i think you need to watch. Thanks

[@onceuponatime9314]

it might be an idea to cut a slot to fit a tyre iron through at an angle behind that hook, just an idea from u.k great vids good fun

[@sydneyshinshi]

Hard to believe they put 7 1/2 mph speed limit sign up. If it was a Volvo dealership or something Euro you might think they have a world wide standard and it is a conversion from Kph but it is a cat dealer in America. Strange indeed. Oh and i just realised my name is on the whiteboard so extra special edition.

[@montygomez495]

Check that nut holding that piston by the turbo that D8 seen like it was loose..@ 3.47 on video

[@denniswilliams8747]

I bet you can improve the oil filtration on your engines. Centrifugal filters can take out the soot. Thanks

[@B81Mack]

Mack started using a centrifugal filter well over 30 years ago on the E6 and later the E7... did exactly that, removed a ton of soot.

[@carlbriant5425]

swicth blade turbo lock nut on clevis was loose threads on clevis or shaft don't last as long vibration

[@boganphelps7809]

Hey jeff. Couldnt help but notice the jam nut on the turbo cylinder is loose in youe video..

[@bcbloc02]

As the finance man you don't get to run the equipment. :-) My experience with India tires was they dry rot cracked something terrible and were junk in less than 10 years. Hopefully you will use those scrapers enough they are worn out before that time elapses!

[@Boodlemania]

Man that's some beautiful country.

[@paulpence8895]

Thanks for not sending them to Colorado!!! LOL

[@badriv455]

Speaking of A-model...whats the status on old Kenny? We havent heard anything since you tore it down.

[@2020jd]

Jeff what’s going on with the 1698 for Old Kenny? Haven’t heard your talk about it in a while

[@normandyck7609]

You forgot to offer us a coffee when you stop for your coffee

[@kenuber4766]

4:00 jam nut loose on the switch turbo shaft. HaHaHa.

[@farmallskittle]

Shane's about to get pulled over now that you have away his hiding spot lol

[@hvy1ton]

Ron's Tire Factory is awesome. I was wondering if we'd every get any video of Terreton/Mud Lake with you working at the INL.

[@tater_relocater]

Geeee you didn’t cover the exhaust stack 😂🤣😆. Ps Good Friday nite watch sir . Have fun measuring.

[@josephpegram1]

Good lord measure twice and cut once went out the window when these got passed around the job sight. Spend the whole day measuring.

[@Jpaydirt]

Job sight................... get it lol not site lol

[@josephpegram1]

@@Jpaydirt I didn't mean it that way but it fits. Lol thanks for showing my error. I'm 37 and try to learn something new every day.

[@waynecompton7612]

Good morning Jeff, thank you for another video, it's always a pleasure to watch and very amusing!!! You've got some very loyal subscribers and your sense of humour well what can one say!! How much do the tape measures retail at ????? Take care my friend and catch you next, 👍😎🇬🇧.

[@Jpaydirt]

www.gogotape.com

[@phillipbonner5215]

Cool tape measures.

[@cjeeper86]

D8 made in Peoria IL just 20 miles from Morton parts warehouse I see them on train cars going out of town all the time

[@youpattube1]

New subscriber from brian bloc. Do any of your videos show you getting one of those big bulldozers up on the trailer and chaining it down ?

[@dirtworkah8077]

Jeff, I think the best way to keep the Cali-fornians out is to remind them that most of Idaho is conservative, & agree with the current administration.

[@Jacob_6420]

@Richard E. Miranda Jr. no cause everyone is gay, lesbian, or transgendered unicorns or whatever they identify themselves as out there.

[@lorenmorelli9249]

If I don't get my TD 25E back real SOON, I will need to rent one down here.. Great Vid Jeff... Sharing... ;)

[@clydeacor1911]

Hey just wondering if you know where a guy can find a decent deal on a TD 25B engine? Mine threw a rod out the side and can't find one anywhere other than modern machinery in Missoula Montana and they want $15,000 for a used one with no guarantee other than it'll start and it's been sitting on the shelf for 15 years. Lol...

[@lorenmorelli9249]

I know a gut that has a complete TD25B for sale. Set up for farming. He also has a TD25C also set for farming. A very meticulous fellow. If you wish to speak with him I can put you in touch. I think he still has them. Jeff has my phone number which is no secret but I already get enough bullshit calls to put it out any more than I have to.. Thanks Clyde!!

[@ericrichwine7781]

Jeff you tease! oh sorry yeah we only rented it lol! great video and thanks once again.

[@shanemarzoff827]

How do you take off so fast from those Red traffic lights 🚦 just sitting in Barstow Cali getting my shine on be running up I-15 no back roads this trip 🤣🤣🤣🤣

[@markbulva4188]

And for anyone from California we are full!!!! 😂 I think every state and province in North America is saying that!!!

[@Gavin84w]

First time i have ever heard someone state the correct oil change for a D300 family engine, 346 the same too at 125hr

[@stevenmontoya3273]

Been watching for a few years. The question is where is old Kenny. What happened kenny

[@Digginok]

Ya didn’t cover the exhaust on the 8! 😂 hope it don’t void the warranty!

[@tituspullo1957]

Kinda thought you were renting it.I know one thing if did buy that D8T the old Kenny budget would go out the window.There's a 2018 on the Machinery Trader site for $750,000 at over $13,000 a month payment.Your not that crazy Jeff just a little nuts now and then thats what keeps your videos interesting. Look for an older 9 like you have and stick with your older stuff its way cooler to watch.Nice country great video.

[@kurtdupuis8313]

Great videos keep up the good work. From Rayne, Louisiana