GAN 13 / CHRISTMAS RUBIK'S CUBE UNBOXING | SpeedCubeShop.com

[@eggEditzz]

The edge magnet is repelling with the core magnets so when it gets to 45 degrees it will force the cube to turn.

[@JPerm]

Oooo that's a smart design!

[@positivity3311]

@@JPerm I agree. Gan, you had us spooked for a moment!

[@TesserId]

Yup. Just popped open mine (sorry, early adopter), and used a little student bar magnet on a plastic Gimbal for studying magnetic field (sorry, Mr. Science here), And, confirmed; the magnets on the feet of the edge pieces are the polar opposite of the corner _foot_ magnets. That is, to put is as simply as possible: 1) corner foot magnets with attractive polarity: yes, please stay here with the cube aligned. 2) edge foot (boat?) magnets that are repulsive (heh): no, keep moving along, nothing to see here at 45 degrees.

[@infinite_slimez]

@@JPerm do you recommend UV Coated or Frosted bc I'm getting a Gan 13 for Christmas and i don't know which one to get.

[@NotoriousNastyNas]

@@JPerm to rotate a center piece by 90 degrees you can just use m2 u’ m2 u’ m2 until you get h perm and then just use normal h perm

[@passusers3360]

the items hitting the table in sync with the music at 1:47 is so satisfying

[@JustDanishXD]

"How many magnets do you need In one box?" "How many boxes do you need in box?" *That defines GAN in the best way possible.*

[@ChaosSamurai]

Well the cubes are still good

[@luigiheewan]

Fun fact: doing 2 j perms moves the face of the layer being permutated turns 180°. If you do the U perms it turns 90° (if it is the UA perm it will rotate counter clockwise, if you do the UB perm it will rotate clockwise).

[@elouanlahougue]

Well it depends on the alg you use for U perms, JPERM uses M moves

[@theflashcubing1566]

The corner magnets were weakened but not by too much, just enough, they still attract those core magnets, but the edge magnets, when they hit a core magnet, it repells and pushes you toward the next turn. Two opposite forces working together.

[@gallium-gonzollium]

so what happens if i blend a gan 12 magnet with gan 13 edges and gan 11 corners?

[@theflashcubing1566]

@@gallium-gonzollium It would feel like a GAN pushed to an extreme

[@Free-4554]

Can wait for SengShou to release an entire line of cubes that will inevitably become J Perm’s mains (YJ MGC style)

[@JPerm]

Hey if they can pull it off, I'll take it :)

[@peanutant11]

@@JPerm id take one lol

[@nishat1122]

@@peanutant11 ok beta

[@ridhambansal6594]

Please do the million subscriber giveaway It's been 6 months

[@Muhriz_shakeel]

@@ridhambansal6594 uh what speed cube shop already did it for him

[@Brimseyy]

Hey, J perm! Thanks to you, I now average 20- 30 seconds on my MoYu rs3 M maglev. Still trying to perfect f2l, but I've only been practicing for a year. Thank you again!

[@manohanged]

I recommend you practice more. I got 15-20 secs in a few months with roux and the same cube

[@abrahamjh5742]

Yea, practice more. I got sub 20 with less than a year

[@monicaespada6499]

9:40 if i'm not wrong, the twisting centers work in mulpiples of some number, like on edges (multiples of 2) and corners (of 3) based on my "experience", it looks that they work in multiples of 4 or 2 If someone studied more this, explain me how it works

[@Starwort]

There are always an even number of 90° turns when at a solved state. (Doesn't matter which way because 180° is just 2 90° turns) The algs I use for centre turns are: U180 - (U L R U2 L' R')2 U90cw F90acw - (U M' U' M)5 U90acw F90cw - (U' M' U M)5 (The two above you can remember as turning U in the direction you want the centre to turn) U180 F180 D180 B180 - (U M')8 U180 F180 - (U Lw' U' Lw)6 (Less common than the others but useful when they come up)

[@LegendaryLuan]

Hi J Perm, thank you so much for your amazing tutorials! I started learning cfop a couple months ago and I’m now averaging 33 seconds (pb 22s)!

[@AverageTrumpetPlayer20]

Same for me lol

[@SP00NGEB0B]

Thats a big leap for a pb

[@liamwoo5116]

my pb is 18 i average 29 with gan 12 leap

[@_drek237]

@@SP00NGEB0B nope there are lucy scrambles which can decide your fate. I once had sub 35 average but i got a 19.45 second pb because of last layer skip and now im almost like sub 25 average but I haven't beaten that pb cause I haven't gotten any lucky scrambles.

[@Goofypersonthatexists]

Same!

[@cubee9403]

3:47 the edge magnet is repelling the core magnet and then it goes up then it's basically just turning on air cause it's repelling what gives smother and faster cube and that made that crazy catch when edge almost fall out

[@zhongcubers]

3.47 is a world record as well 😂

[@ramen6922]

I have been waiting for this unboxing for ages! Yay so excited to watch!

[@vinstle]

Yes, I've been waiting for this video since the Gan 13 came out!

[@viz81gaming]

Whenever GAN releases a new cube my old ones start acting up 😂

[@tara3377]

Like apple haha

[@JLCubing]

@@tara3377 Lol fr

[@madhavikumbhar]

GAN will say something like "We made the older cubes more controllable to increase the lifetime of the older cubes"

[@tjzero0008]

It's funny that most people say more than 3 setting ptions are kind of excessive. I actually appreciate the fine tuning and its a necessity to a comfortable feel for me. Also great content man. Thanks for teaching me to solve a cube!

[@JPerm]

I think it's mostly a good thing, but I think for some people it can be really distracting to keep fiddling with the settings, lots of which may not even be good.

[@tjzero0008]

@@JPerm that is very true, while I love fiddling around with different settings it can become quite time consuming and tedious lol.

[@tjzero0008]

@@JPerm also while irrelevant I think it's super cool that your new main 3x3 is the same as what I chose. The WRM21 maglev! So purple!

[@clashdanik1480]

Hi JPerm I live in Belarus but at the same time I watch your videos, you have such content that others do not have, thanks for the videos

[@cubebattles353]

I can't believe they're already advertising Christmas I haven't even taken down my Halloween decorations yet 😂😭

[@Aaron-hz1rm]

Ikk

[@JPerm]

But your local malls are definitely getting their Christmas decorations up 🎄🎄

[@HobislittlePersona]

@@JPerm Hello Jperm!! I’m your big fan.. I wanted to buy the cubes featured by you, where can I buy them !?

[@thectheb]

@@HobislittlePersona bro thinks he tufffff 😭😭😭😭talking on the internet. Boy u better hope I don't run into you in the streets cs I don't play no game😭

[@HobislittlePersona]

@@thectheb Pardon !?

[@curiousNic]

The GAN cubes grow up so fast. I‘m currently in Australia (summer is coming) with christmas decorations everywhere in the streets of Brisbane. Can‘t wait to get the cute christmas cube when I get back.

[@noamiller749]

Thank you for FINALLY telling us why you did not post for 3 weeks.Also thank you for actually posting every Sunday.👍

[@FactsinTime7]

3:49 it is to confuse the delgates when the cube lands on the the exact 45 degrees (just kidding it is repelling magnets it is to make sure to have less friction when the cube reaches 45 degrees)

[@The8BitNerd]

On the Gan 13 the edge magnet repels the core magnet and is the key behind how that auto turning works

[@rickhandsomeawesome235]

Glad you had a good vacation and I’m excited for the videos to come.

[@CubeBiks]

It’s impressive how gan can add more magnets in Their cube :

[@linas804]

Jperm, I could say so many good things about you, but I will say one I love you, your chanell videos. You're the best, I know you get a lot of comments like this, but just now that you changed so many lives, gave me a hobby. Thank you for everything!!!

[@wallford49]

I love your content J perm.

[@lakey7886]

for the gan 13 edge core magnets the edges repel the corner core magnets

[@NatureSkyViews]

The edge magnets probably repel to make sure it fully turns

[@masonbtw9081]

was just binge watching your vids after not watching for a while and you upload! perfect timing

[@lathandriver3293]

Great job keeping the videos updated. Love this channel so much. It always make my day and has helped and inspired and informed me in my cubing “journey” Thanks so much

[@Fzcubing]

Samee

[@e3then]

Jperm: Gets new $85 Gan 13. Jperm in the video: OoOohh look at this new Christmas Cube!

[@SirCrypt]

ABSOLUTELY LOVE YOUR VIDS JPERM

[@cubebattles353]

LADIES AND GENTLEMEN THE MOMENT YOUVE ALL BEEN WAITING FOR :D

[@Aaron-hz1rm]

Yass

[@xiaoyunzheng1833]

J perm: Do you know what happens after Halloween ends? Me: THANKSGIVING!!!!! J perm: The Christmas season. Me: oh.

[@typikal3137]

the cube box looks SO cool, im still using the gan 11 and its really smooth.

[@Hello.69420]

Great video Gan 13 maglev: I want to get the gan 13 more but the price is, well expensive. Also the edge magnet repels the core magnets to help align itself but is too overkill already from the gan 12. Christmas cube: it's quite weird for you to average 8 seconds on a 3x3 but a picture cube Is 5 minutes. How was your time at your holiday?

[@CaidenBS]

ShengShou’s company name is called SengSo because that is how you pronounce it in Cantonese

[@cringyman213]

I took a break from cubing 2 months ago and this got me right back. The GAN 13 looks so... Same as the GAN 12. GAN straight up Appled this. The magnets are the cameras

[@gus7895]

The GAN 13 is a dream. If your happy to spend, you will not be disappointed.

[@cgpuzzles3107]

KZbin shows 52 comments but there are literally none...

[@lutimstrickshots9253]

Finally, goodness me, what took you so long? A million people were waiting for you.

[@Spifyninja]

I love how Gan can't fit any more magnets into the cubes so they put them into the packaging instead.

[@Omegagerbil]

don't even mention it, or they'll try to 🤣

[@qar_ty7732]

@@Omegagerbil you can see magnets in the packaging in the video

[@Omegagerbil]

@@qar_ty7732 I was saying that about the cube. Don’t mention magnets, or they’ll add more in the cube.

[@TheOrigamiGenius]

I can't wait for the fall opening video at speedcubeshop

[@FusionShadow54]

I did not know there was a GAN 13, it feels like the 12 came out not to long ago.

[@shshjkl]

If a year is not long ago....

[@zvsx]

Best vid ever😂😂😂🎉🎉🎉 I definitely watched it

[@Trollolololol69]

I don't understand why Gan makes such fancy packaging... The box probably costs more than the cube... (First)

[@Yellow434]

You were first but idrc

[@xxsnxwy]

Well done!

[@hsgaming3205]

ive been waiting for this for like an entire month. its here 🎉

[@DiamondSword79]

Never been this early before

[@SirCrypt]

Same

[@WiredoGamingAndCubing]

Yeah same

[@DiamondSword79]

Same

[@cubenews8534]

He protecc, He attacc, But most important.... *he’s back*

[@supernuggetshorts]

First comment

[@supernuggetshorts]

Daddy

[@pwizzlesiz]

i love your admiration for penguins.

[@FanninKaren]

is the j perm cube really that good?? I'm wondering if i should buy it

[@SummerBanana]

J perm, do you mind reviewing the gan 14 maglev for us one day? I hope so. Thank you for your support! Take care!

[@andrewcaruso4515]

the edge magnets repel the ones in the core to help align the cube

[@jay12336]

oh and i just bought your JPerm RS3 M 2020 3x3 and used your code too. lol and this is my first good cube i bought .

[@mouhktar4587]

When I tell you I’ve been waiting for SOOO LONG For this vid

[@RealKevinPlays]

J Perm, the edge magnets repel to the core magnets, hope that helps

[@royitaqi]

3:55 I think the edge magnet is supposed to smooth out the feel you get from Gan 12 that you need to push harder to start the turn and push lighter when finishing the turn. I.e., instead of a big resistance at the beginning and a big suction at the end, it's now introducing a middle suction followed by a middle resistance, to smooth out the beginning and the end.

[@LegendaryLuan]

Let’s gooo J Perm is back!

[@bookies24k8]

The corner magnets attract to the core magnets and the edge magnets detract, thats why it basically turns itself because its both a push and pull force at the same time

[@Ankle_heaven]

Can you imagine Gan 13 with Gan 356X v1 core and edge magnets and MS3X edge tornado? It would definetly be best cube out the market. The only problem is it is Gan and it would be at least 100 dollars.

[@tkvbruh]

HELLO JPERM!!!!! i was REALLY excited for the gan 13 review by you. thank u man

[@τυτει]

Finally !!! NEW WIDEOO🥳🥳🥳🥳

[@TheCube-Itself]

The magnet on the edge magnet attracts he magnet on the corner piece, so it proofs that the edge magnet is repelling the corner to core magnet. Because the corner magnet attracts the core magnet and the edge magnet attracts the corner magnet too, so it means that the edge magnet and the core magnet is the same. So the edge and the core magnet is the same, so they are repelling each other.

[@Mr.Mate.]

Are you going to do a video of the fall open at speedcubeshop

[@Dominic7449]

When’s the 23x23 magnetic cube releasing?

[@joshuasafont4216]

I love your videos. I have a suggestion. Can you make a comparison between the GAN 13 MagLev and the Tornado V3 M and tell us which cube is better in your opinion. Thank you Joshua Safont

[@joshuasafont4216]

@J Perm please read my message. I love your videos

[@Verlisify]

That magnetic box is like the craziest deck box for a TCG

[@Kristan1503]

TCG??

[@Emphetic]

@@Kristan1503 the card game

[@abdi9626]

Remember the stream eith scs? Im still waiting for the smart cubes

[@NiceBut_Aussie]

Yesss, the Christmas cube is all I’ve ever wanted.

[@firenateboi7360]

Mw who was waiting for the gan 13 to b reviewed by j perm. 😀😀😀😀😀😀😀😀😀😀😀😀👍👍👍👍👍

[@EL9Z3]

looking forward to your review of the Gan13

[@CubeCollector]

Finally the gan 13 review!

[@gkcuber]

YES YES A JPERM UPLOAD (seriously I was so excited lol)

[@cubee9403]

Finally I waited for the gan 13 review

[@shinigami6714]

Yoo Finally the Gan 13 video is here

[@prometheus8697]

Finally I've been waiting for this

[@cccubing]

You are the best unboxing cube channel!

[@lutimstrickshots9253]

When the cube is at 45 degrees the edge magnets repel the core magnets which pushes it to complete the turn.

[@goalhime3620]

Yeah let’s go you finally unboxed the gan 13🎉🎉🎉

[@adasfdhsdf]

Yayayyy new unboxing video 😄

[@PiersCawley]

I'm loving mine. It could be just me convincing myself that it must be good because I spent so much money on it, but after a bit of fiddling with settings, it's spoiled me for other cubes. I love my 2021 WRM, but it feels kinda clumsy now.

[@DatKayG]

"can't believe gan is already a teenager :')" 13:26

[@lutimstrickshots9253]

Nobody's gonna talk about the "Can't believe GAN is already a teenager :' )" at the end of the credits?

[@loony_ninja230]

Jperm: "you know what comes after Halloween, Christmas" thanksgiving: "what about me?"

[@philry.4319]

I guess the main purpose of the magnets in the edges is it repels or pushes out with the core magnets, so that when you are half way of your turn, it helps the "turned side" finishes its turn. I might be wrong .

[@georgepolakis9384]

My guy j perm, are you ever going to upload a new video or did you quit.I thought you had a lot of videos planed😢

[@maasidjaved2702]

When is your scuba diving and speedcubeshop open competition vlog coming ?

[@arascasciato5147]

The edge magnet repels the magnets in the core to force the cube to turn as if the corner magnets attracting to the core isn't enough

[@pentapodes5708]

J perm have you tried the square-1.5 ? its harder than sq-1 and maybe you could attempt with no help 🤷‍♂️🤷‍♂️

[@shirly5575]

when will review the moyu rs3m ball core

[@ashbrad2901]

I have the exact same cube. The 13 but mine does not do that turning thing can you please help me I don't know why?

[@maxspezialbauag9745]

@JPerm is the lockup problem from the Gan 12 still a problem on the 13?

[@The_Official_AgentY99]

lets gooo!! the gan 13!

[@theflashcubing1566]

I letted you try my GAN 13 at SpeedCubeShop Fall Open 2022! There was a dust storm at the event and we had to move inside. My puzzles were in my GAN backpack, so none of them got sand in them.

[@brandonclarke185]

i was at the fall open, too, and i was the next in line for getting my solve critiqued when they closed it down due to the weather. i was so sad.

[@cheezeworm]

the penguin is so adorable

[@claudioschmitz247]

Finally I’ve been waiting for so long😂

[@scramblastic7891]

Hi J perm I am 13 years old its good to say that I have been sub 30 with the 2 look oll and pll in 5 months but now I just want to learn the full cfop oll and pll so can you please give me a link a pdf which contains the best algorithms

[@ionutadrianisaachii320]

I like that you said to take care of gan 13 and the other one you threw away

[@vikeeh]

Yay! Another video. It's never too early for christmas🎄

[@42Robotnik]

I picked up the Christmas cube since it was cheap. It started to gaslight me when I was doing OLL because it wasn’t working even after I double checked that I did my algs correctly. Then I looked and noticed that I had slotted the Reindeer-Bear edge in the Santa-Bear slot because the greens were so similar. 10/10 cube.

[@al_cuber]

So the gan 12 has big catches but this has shorter magnets except it feels similar as the 12 and the corner cutting is better