Losi LMT Grave Digger Unboxed and First Run. (Impressed!)

[@ncscs8815]

Put foam under nose above aluminum chassis on Gravedigger, saves front end when it face plants👍Great truck!

[@Twentyfoursilver]

I purchased both of them , very happy and impressed with them as well ! enjoy !

[@vbspeed7571]

Lmt wat stronger tho

[@ShenRC]

Nice video. If you want less cogging try setting the esc motors timing to 0 it should give you a little more power also maybe a smaller pinion gear... I set mine to 0 timing I only run 2s I think anything more is crazy for what this thing is.. It seems like a real nice balance of speed and power on a 2s for me anyhow... I know guy's out there are all into the massive power and speed thing but I am used to my clodbusters going only 16mph so the lMT on 2s is flying. Have fun with it I am loving mine!

[@rcsmith5909]

That was awesome running footage!! I would like to see more of that!!👍🍻

[@vbspeed7571]

Just had time 2 finally make a jumping video with mine

[@airguns_rc]

I have the Grave Digger on hold at my local Hobby store.Thanks for the information in your video.

[@longboardguy]

I might have to get one of these trucks for some winter fun seems like it goes pretty good on snow with those big wide tires. And I love monster jam when I was a kid. And of course the grave digger was my truck! Very cool I like the scale realism of the t4uck. Thanks for his video even though it’s an older one now I’ve only now started researching the LMT

[@timvanasen6711]

I got both rtr's from my local Hobbytown love this platform & I haven't had any axle breakage yet tho I'll most likely get the Treal aluminum axel housing and upgrade servos in the future cool video 😎👊

[@rcsmith5909]

The action that the LMT puts out in videos makes it seem like a nice bigger capable monster truck. I feel.

[@JasonPerrinRCVlogs]

Its a lot of fun. I'm thinking of getting the roller now and building another.

[@cwatson42785]

Pumped you got one!! Im definitely getting some renegades for mine. Im surprised you got the digger as I thought the roller would be more your style. I went with the roller so I can do up a body and go with a little bigger motor in it.

[@samtronicsvideo7232]

Hello… great review and I thought you liked it…. But did I read later that you sold it?

[@speckledjim_]

Losi do that quite often - they'll supply a 4s esc with a 3s motor. I also use the savox 1231 in my heavier rigs

[@steveshot81]

The truck really moves well in snow

[@GreatLakesRC]

Lol! Like a kid on Christmas! I can tell your really excited 👍

[@JasonPerrinRCVlogs]

I may get another :). LOL

[@MARKLINMAN1]

Just ordered the blue one. Son Of a Grave Digger.

[@MrNBagelmore]

Jason have you tried the HPI Savage's flanged locknuts? If they're the same size thead they may work.

[@JasonPerrinRCVlogs]

No but that is a good idea. And I think inha e some somewhere.

[@choke666]

I GOT THE LMT SON UVA DIGGER A FEW DAYS AGO. FREEEAAKIN AWESOME! It doesn't require ANY upgrades rite off, which is nice. Cold does wreak havoc tho!

[@steveshot81]

You showed your liscence plate people can find out where you live.Not that we are stalkers or anything like that.Good video

[@choke666]

Yea buddy! Kinda makes you sound like one, just sayin. I'm sure it's gunna be 👌.

[@steveshot81]

@@choke666 I'm watching you from a far

[@choke666]

@@steveshot81 HAHA, AWESOME! (Except i think back on stuff i may have been doin, and now I'm kinda embarrassed!)

[@SebastianLong]

13:39. They sell "washers" to solve that problem. I use them on my UDR when I want to run Proline Badlands on it. Not the MX38's. The smaller version, 2.8 size. It is probably close to 1/4 inch thick machined aluminum. On one side it is serrated for the nut to tighten against, then the other has a lip that fits into the recess of the wheel holding it from flopping around. I don't know the part number, but I can get the brand that makes them if you are interested.

[@nate0765]

I’m guessing the extra holes are there so people have the option to use trailing arms and smaller shocks, that type of setup is popular in club races.

[@KaizerTest]

Excellent unboxing man! Lotsa snow up there eh? 👍

[@3SonsRC]

Great stuff as always Jason, Seriously considering one of these🤔.... Maybe I could convince one of the boys to "want" one 🤣😂... Should be easy they LOVE Monster Jam. VERY interested to see you run this in the spring along with your Xmaxx with MT tires.....that thing is a beast

[@JasonPerrinRCVlogs]

It's a super fun truck. I had it out again today and it's really fun in the snow. It's going to be a fun all year around truck.

[@rcpete7055]

I watched the video to the end👍 v interesting.. Please check Hemistorms video on the shortening the chassis rails 😊

[@DestructionRC]

nice - these look pretty fun

[@y2shanon]

congrats, just got mine had trouble finding 3s 5k mah lipo that would fit, trying the spectrum 5k 3s as it should fit.

[@JasonPerrinRCVlogs]

I'm using a gensace 3s 5000 pack. Works pretty good.

[@ScottMcLinden]

Maybe one day. 🙏🏻

[@cwatson42785]

If you are having cogging issues have you tried setting the throttle end points? I had that solve that issue in another vehicle. Just a thought

[@rchydrozz751]

Im waiting on the 1/8 scale of this. The WB on these seem a little small.

[@vbspeed7571]

This is one of my favorite now

[@chrisryder4709]

First thing out of the box , I didn't want to drive it , but got over that , I shoe goo n drywall taped it very carefully , it is a tank ! But put some shoe goo on the top of the steering block kingpins , they are gunna fall out , I'm just waiting for metal axlf housings , we all know there coming 🤣😂

[@benjimolly1]

Hey that area looks familiar. Are you by chance in the Ottawa area?

[@JasonPerrinRCVlogs]

More North. North Bay.

[@benjimolly1]

@@JasonPerrinRCVlogs lol my bad. I guess a lot of places look the same in Canada. Cheers fellow rc friend.

[@rcsmith5909]

Dude that SMT10 is sweet . I love your vids. Seem well planned and thought out. You're neat as a pin and through,precise even. Love the breakdown,pics at the end ,running footage all of it. Hats off 👏👏👍🍻. I want to start doing vids maybe, lm so far behind on technology that l guess, intimidated even. Any advise? Thanks for the hard work JP

[@chaoticadventure]

It's not an SMT. LOL

[@THERCDOCTOR]

Make scale great again

[@heribertozarate]

On ur smt 10 what tactic servo is that

[@philthyco1]

Dope!

[@TikitikiNacho]

great video!

[@rcboys619]

I want to get one. I have an SMT10

[@stoneenforcer]

4s has been done and proven. But yeah.. 3s is plenty

[@BASSstarlet]

Waiting to fix the dull sticker...

[@paulclancy2404]

I run 4s , you don't use much throttle so runs cool WAY to much clogging

[@bjj21]

Unbox. Breaks.

[@bjj21]

I'm so disappointed in this truck. FYI be prepared to upgrade.. My first run I didn't hit any big jumps. Broke the link on axle AND front driver shock. 2nd. Front driver shock. Realized that it didn't snap it from the link, it is unthreading itself. 3rd run. Same thing. Front driver shock unthreaded... it needs sway bars, aluminum parts all around. Tires wabble on driver side like crazy. And most ppl are breaking axle housing. So disappointed

[@JasonPerrinRCVlogs]

I sold mine. I wasn’t impressed either. The truck was a huge let down.

[@roseb4453]

Too much plastic