no mate that is to do with the light switch unit itself... you need to replace the potentiometer in the switch to stop the lights flickering... if you send me a message on my social media I can send you a picture of what you need to replace 🤓👍
@rctankchannelone75583 жыл бұрын
@@jpst170 will do mate, be nice to get rid of the flicker after 18 years 😂👍
@solidsnake1231003 жыл бұрын
@@rctankchannelone7558 It is easy to fix. Or you can replace the headlight switch if you have spare. Dimmer makes the flicker problem.
@solidsnake1231003 жыл бұрын
I don't want to criticized you work BUT problem with these dials and needles is, you must put the needle to exactly the same spot, as you remove it and if you check the video, the needle of the oil temp is little bit low so the reading now is not correct. Same is the speed needle. You shoul check if the speed match the GPS speed on your phone because common mistake is the used did not put back the needle correctly and speed reading is not right. No offence.
@jpst1703 жыл бұрын
none taken buddy I respect your comment and add that before I assembled the case I plugged them in and checked them against my OBD live data and except for the engine idle and the engine temp being slightly out they were spot on... the small needles have a pin on the back to sit between the gauges entire sweep... I appreciate the comment and added information given for anyone else who needs it 🤓👍