Thread Sizes & Irons COMPARED. What do you need? Super Easy Approach for LEATHERWORKERS.

In this video I dive into the subject of stitch spacing and thread thickness. Which combination is "best" and which one should you go with if you are just starting out in leatherwork and looking to make bags or wallets.
Pricking Irons vs Thread Sizing Chart:
norfolkhandmade.com/resources...
🛒 SHOP 🛒
Use Code: KZbin10 at checkout for 10% off Ready To Ship items.
👉🏻 FOLLOW US 👈🏻
✓ www.norfolkhandmade.com/
✓ / norfolk.handmade
🔎 CHAPTERS 🔍
0:15 Overview
1:42 What I Use
2;13 My Recommendation
3:18 Two Considerations
3:40 3.38mm Irons
4:53 5mm Irons
2:45 Styles of Irons
7:02 Recap
7:40 Disclaimer
8:14 Final Thoughts
Disclosure: As an Amazon Influencer, I earn from qualifying purchases.
🧵 TOOLS & MATERIALS 🧵 - Affiliate Links are from Amazon
ACCESSORIES
Radius Jig
US amzn.to/43L5kvs
CA amzn.to/42yScbI
Positioning Square
US amzn.to/43sIc5j
CA amzn.to/3Cksb5g
Glue Squeeze Bottle
USA amzn.to/3BfARt5
CA amzn.to/44OAUd3
Cutting Mats
US amzn.to/44NpaaF
CA amzn.to/3VVLHOr
Mylar Sheets
US amzn.to/3VW8dqD
CA amzn.to/3pxZGOv
Glass Slicker
US amzn.to/44Tgcss
CA amzn.to/41tYh91
Rulers
US amzn.to/42uKH6G
CA amzn.to/3VWxJw3
Binder Clips
US amzn.to/42O5O3m
CA amzn.to/3pz1czI
Hole Punch Sharpener
US amzn.to/42P9e6b
CA amzn.to/3pvab54
Bone Folder
US amzn.to/3pvaeOi
CA amzn.to/3pvrqTY
CONSUMABLES
Beeswax
US amzn.to/3LWE59P
CA amzn.to/42rqdeZ
Double Sided Tape
US amzn.to/42sYV83
CA amzn.to/3I3wi9k
Honing Compound
US amzn.to/44P8C28
CA amzn.to/3pvspn8
Crepe Rubber
US amzn.to/44JrqzI
CA amzn.to/42tDbcb
EDGE FINISHING
Tokonole
US amzn.to/41mrIcY
CA amzn.to/3VWbpSV
Marker Bottle with Dauber Tip
US amzn.to/3W9L04x
CA amzn.to/42rz40a
Foam Brush
US amzn.to/3O0ZJg3
CA amzn.to/44UwOjx
Wood Burnisher
US amzn.to/3VRziex
CA amzn.to/44UwW2v
Dremel Wood Burnisher
US amzn.to/3MjDEaY
CA amzn.to/44OnnlN
Canvas Cloth
US amzn.to/3MhM6rp
CA amzn.to/42tffp6
Muslin Fabric
US amzn.to/41mtomM
CA amzn.to/3nVj9rV
Nail File
US amzn.to/3VWfNS7
CA amzn.to/3Mi9rJq
Sandpaper Wet/Dry
US amzn.to/42GsRgo
CA amzn.to/44PFyHE
FILMING & PHOTOGRAPHY
Camera Monitor
US amzn.to/42GtAhC
CA amzn.to/42KPh03
Sigma 30m f1.4 Lens
US amzn.to/42t68VF
CA amzn.to/3I29SoZ
60mm Macro Lens
US amzn.to/3VRN29d
CA amzn.to/3BhPgFe
Camera Desk Mount
US amzn.to/3nWMC4D
CA amzn.to/3LWLdD7
Small Rig Clamp
US amzn.to/3Mibu04
CA amzn.to/3pvA98G
Camera Dolly
US amzn.to/44UksIu
CA amzn.to/3pz9TtQ
Phone Tripod Mount w Cold Shoe
US amzn.to/3I3NafX
CA amzn.to/42sfhha
Camera Lens 3in1
US amzn.to/3O11ARP
CA amzn.to/3nZTfmK
GODOX SL-60W
US amzn.to/3MiVB9M
CA amzn.to/3MkHVeE
GODOX Softbox
US amzn.to/3LTPqrd
CA amzn.to/3NWkfOM
GODOX Lantern Softbox
US amzn.to/3BjA3n2
CA amzn.to/42MA92l
Monfrotto Articulated Arm
US amzn.to/41t5buY
CA amzn.to/3nKsIKl
SHARPENING
Diamond Sharpening Stones
US amzn.to/3Mfv90O
CA amzn.to/3HX57Nq
STITCHING
Dremel
US amzn.to/3VWkdsb
CA amzn.to/3O3j6VO
Stitching Pony
US amzn.to/3VSC4Ai
CA amzn.to/44RwF0b
Thread Zapper
US amzn.to/3LSnlRf
CA amzn.to/3VU7GW2
Needle Case
US amzn.to/41oTCoF
CA amzn.to/3O98ZOW
Polished Hammer
US amzn.to/42sS6mH
CA amzn.to/44QowJy
TOOLS
OWDEN End Punch Set
US amzn.to/3LSnPqx
CA amzn.to/3VTW31m
OWDEN #1 Edge Beveler
US amzn.to/3LUPSpo
CA amzn.to/3I0RcFY
OWDEN French Skiver
US amzn.to/3LWuYpL
CA amzn.to/3VTZMfj
OWDEN Mallet
US amzn.to/3NV3Km6
CA amzn.to/41t9IgU
Mini Hand Plane
US amzn.to/3pzDOSI
CA amzn.to/42pUUB3
WUTA Skiving Knife
US amzn.to/3pnPQyu
CA amzn.to/4544Xhd
Hand Press
US amzn.to/3VRQsJ5
CA amzn.to/41sJIlV
Arbour Press
US amzn.to/41uJpHc
CA amzn.to/434rSXV
Creasing Machine Handle Holder
US amzn.to/3VWfp66
CA amzn.to/42JSFZh
Hole Punches
US amzn.to/3W1p4Ze
CA amzn.to/3I1BxpW
Wing Dividers
US amzn.to/41n9RCR
CA amzn.to/3nSwFws
Hobby Knife
US amzn.to/42J2Qx6
CA amzn.to/42D23xM
Hobby Knife Blades
US amzn.to/44S9RgR
CA amzn.to/42KUCED
#leathercraft #threadsizes #leatherworkers

[@NorfolkHandmade]

Let me know in the comments what you think. Do you like the 0.45/5mm? Hate it? Cheers Justin

[@edusszfx]

It's hard to find videos with this quality, going over spacing and threas! Super appreciated!

[@NorfolkHandmade]

Thanks! I’m happy you found it helpful. I found this topic to be very confusing when I first started. I made the video that would have helped me. 👍🏻

[@BushRat253]

I really appreciate the help picking my first pricking irons!

[@joannewittenbrook8051]

I love the idea of creating a reference sample.

[@NorfolkHandmade]

It’s come in handy a few times.

[@user-zm1ho5ko6s]

Thank you! I saved a screen shot for reference!🙋🏼‍♀️

[@user-yl5cr3eb9w]

Thanks !

[@patriotcam1776]

I ha e gotten more out of your videos in a day than I have in the 2 plus years I have been leathercrafting. Thanks so much for a proper explanation of things

[@NorfolkHandmade]

That comment makes my day. It’s exactly why I do this.

[@epicurustaylor5954]

Yes I'm new so this was definitely for me. It was great, highly informative without being a shill for some company. It really answered a lot of my question about starting out. I hope you will make more vids in this informative format.

[@NorfolkHandmade]

That’s great, I’m glad it was helpful.

[@paulocruz8585]

Excellent video. In my opinion, I prefer 0.55/5mm. It fills the iron hole more. thanks for sharing.

[@NorfolkHandmade]

Agreed, a solid choice.

[@avalargo2194]

Great video. Great explanation and closed up, clear examples, where we can see clearly, what you are explaining.

[@NorfolkHandmade]

Thanks!

[@jameslawrence9167]

Great video Justin. Thanks for showing. It's very subjective but I don't like how sparse the .45 is on the 5mm. I absolutely love the .55 on the 3.38. I like the tighter yet still defined look of this combo. I've only got 3.85 and 3mm frenchies and this video has made it quite clear what thread I should and shouldn't be using. Cheers bud

[@NorfolkHandmade]

So subjective! I’m still undecided on the 0.45/5mm. But it’s certainly fun to experiment. I’m glad the video helped.

[@MattGarofolo]

Excellent for us beginners! Thank you

[@NorfolkHandmade]

That’s great, thanks for watching.

[@theshuriken]

very informative, thanks!!

[@hamedalharthy2767]

Great information Simple and to the point, thank you very much for sharing this video

[@NorfolkHandmade]

Thanks for watching!

[@k-12clothing23]

Finally, a clear explanation. Thank you.

[@NorfolkHandmade]

You’re welcome, glad it helped.

[@jgdevoe]

Pretty much agree with your choices. Not sure what the difference is between Japan irons versus those Tandy diamonds.

[@NorfolkHandmade]

They are very similar. The Japanese tooth profile is more rounded and smoother out vs the diamond irons. It’s almost a hybrid between the diamond and French profile.

[@Ray.J]

Nice representation of the differences between stitch spacing and thread sizes. There's a lot more to the end result that maybe you could cover on a future video or videos. The type of thread also matters. Round, linen thread versus flat, braided polyester, for example. When I use them, they yield different results even when using the same irons. Since you asked for feedback, I prefer the appearance of the 3.38mm irons and the 0.45mm or 0.55mm thread. To me, there's way too much hole left visible in the 5mm and 0.45mm/0.55mm combination. Holes are necessary, but I feel better when they are less prominent. I also would have liked to have seen the backside of the samples. Both sides matter. And of course, stitching technique matters. So in the end, good stitching is a synergy of an array of products and techniques. Not easy to explain in a short time. That's why Nigel Armitage released the 4 part series on saddle stitching, definitely worth watching to be able to really understand what goes into saddle stitching and why. I enjoy your content, keep it up!

[@NorfolkHandmade]

Thanks for the feedback. I tried to keep this one simple because I think a lot of people drastically over complicate the matter. That’s why I left out the actual technique, that’s for another video. I personally think the vast majority of people don’t need to consider all the variables that are covered in Neil’s video. I think it’s videos like that that make new leatherworks think it’s more complicated than it is. When I started out Neil was a valuable resource. Know that I do this full time I realize how simple it can be, there’s no need to overcomplicate the matter and a 4 hour series on it is very much over complicating the matter even if it’s perfectly accurate…which of course it is.

[@Ray.J]

@@NorfolkHandmade I agree that sometimes too much information can be overwhelming. Nigel's video series is more for those wanting to take that deeper dive. You can have success by keeping things simple, no doubt. However, it helps to understand, really understand the process in order to make corrections. Sometimes folks stuggle and have no clue as to why. Nigel's videos explain the why. That's all. Maybe you can do a short video covering the basics of saddle stitching as you do it. You do it quite well.

[@NorfolkHandmade]

Exactly right. His videos are incredible for the depth they go into. Extremely helpful for people that can absorb a lot of content or for anyone that wants to refine their technique. I plan on doing more single topic videos with a focus on the new leatherworker. I appreciate your comments. 👍🏻

[@richj5762]

Thanks, for the informative video.

[@NorfolkHandmade]

Your welcome!

[@amandalipp728]

Super helpful. I'm new to leather. What about needles? Trying to understand the relationship between holes, needles, & thread. With 4mm pricking + .6mm thread, what type harness needle please?

[@NorfolkHandmade]

John James #2 or #4 will probably work fine.

[@V3leathercraft]

Hi, I use only Braided Polyester Thread. I found good aesthetic look are For 3.85 mm-0.8mm 12ply, 3.38mm-0.5mm 8ply (for wallets and Card Holders)and 2.7mm-0.35mm 6ply threads (for watch straps)(All French Style ). For Bags I use 6mm Round hole irons with 0.8mm 12ply Braided Polyester Thread. Hope anyone would feel helpful. Thanks🙏🏾

[@NorfolkHandmade]

Thanks for sharing!

[@MsCybernet]

Thank you very much for the excellent explanation. Thank you for using the international measurement system (millimeter).

[@NorfolkHandmade]

Thanks for watching. It seems to be the most consistent measurement system and the one most people understand.

[@itspowne]

Hello!! Thank you VERY much for the video, I always felt lost while looking at Irons, and you made it very easy for me! One question: what type of needles can I use for a 0.55mm thread? Even those sizes seem to be all over the place. And thanks again for all the info

[@NorfolkHandmade]

I’m glad it helped. You are looking for needles with a diameter of 0.8-0.9mm. Depending on what brand you go with each will have a different size range. The length of the needle will be between 48-54mm.

[@balticleathersupply]

The “Disclaimer” 💯💯💯 FACTS

[@NorfolkHandmade]

Had to put that just for the know it all’s.

[@saint-miscreant]

📌 *TIMESTAMPS* _for my own reference (I know they're in the description, but these are customised for my brain 😁)_ 1:45 - Side-by-side visual of 3.38 and 5mm spacing samples 3:22 - Consideration 1: Thread Gap 3:30 - Consideration 2: Backstitch appearance 3:40 - Breakdown: 3.38mm iron 4:54 - Breakdown: 5mm iron 7:03 - Recap + Thoughts / Close-up side-by-side

[@NorfolkHandmade]

Amazing!

[@freakofnatureco]

Loved this video! Question.. where do you buy your thread?

[@NorfolkHandmade]

Thanks! I get Meisi from Pro Atelier Plus (although there are a few suppliers), and I get ritza from Tandy.

[@permadhiarya8326]

Very nice content !! Btw the "S" letter on the spacing word are upside down lol 🤣

[@NorfolkHandmade]

🤣 I somehow didn’t noticed that until after stamping. Figured I’d leave as a little Easter egg for the observant ones.

[@ToddJohnson15]

I think this also depends on the thread. I have .6mm and .8mm Ritza Tiger thread, which is flat instead of round. I find that because the thread is flat .6mm is still too big for a 3.38 mm iron.

[@NorfolkHandmade]

For sure, the ritza thread flattens out quite a bit after hammering.

[@motoservo]

But wait, isn’t diamond and Japanese the same thing?

[@NorfolkHandmade]

Not exactly. Diamond irons have a diamond shape…obviously. Japanese style have a more rounded diamond shape, kind of a mix between French and diamond.

[@Notorious2024]

Question. What would your preference be if you only had one set of irons, the Japanese or European style?

[@NorfolkHandmade]

French style irons are my preference. But only because I prefer a finer stitch. But for certain projects the Japanese irons are a better choice.

[@itsruf1]

Good grief. This hobby aint for nickle dimes.

[@NorfolkHandmade]

This hobby is however you want it to do. There are a lot of ways to get into this hobby on the cheap. This is a very valid question and one that should be considered when you are first starting out.