Disc brake analysis | Brake torque capacity of disc brakes | Thermal analysis of disc brake

Brake torque capacity is a important parameter while considering the braking with disc brakes. Torque capacity of disc brakes vary with new brake pads to old brake pads. For a new brake pad ,we can use uniform pressure theory to find the brake torque capacity and for old brake pads we can use uniform wear theory.
In this video you will learn :-
1) Brake torque capacity of disc brakes
2) Uniform pressure theory
3) Uniform wear theory
4) Thermal analysis of disc brake
Check out blogs:-
www.automotorg...
Follow me on Instagram :- / thevatsaljain
Suggested videos :-
Braking Dynamics :- • Braking Dynamics | Loc...
Maximum braking force :- • What is the maximum va...
Minimum stopping distance :- • What is the minimum st...
Maximum Deceleration :- • What is the maximum va...
Slip angle :- • What is Slip angle ? |...
Tire load performance curve :- • Which Steering geometr...
Slip angle calculations :- • How to find that Car w...
Brakes :- • Braking Dynamics | Loc...
Vehicle Dynamics :- • What is Vehicle Dynami...
Vehicle roll dynamics :- • Vehicle Roll dynamics ...
Aerodynamics :- • How rear wing or spoil...
Driveline dynamics :- • What is Power performa...
Check out blogs:-
www.automotorg...
Follow me on Instagram :- / thevatsaljain

[@pravin2176]

Can you make a video on hrar dissipation calculation thru convection and conduction for disc brake ?

[@WhatsanEngler]

Been loving the videos, graduated as a mechanical engineer but have been working as a manufacturing engineer for the past year or so. Have recently been missing the design side of things and have been loving your videos because recently I have decided I might try and apply some of the engineering knowledge im learning from your videos to over engineer the shit out of a little RC car or something I think that would be fun. Do I need to worry about over engineering a small scale rc car? Probably not but being able to say I have worked out all the equations and designed it would be cool.

[@supreethrkoundinya2872]

Brilliant. This channel has a huge potential when it comes to the math part of automotive engineering, and even given the fact that mechanical engineering is such an under-represented field in the KZbin content space. Keep it up!

[@GentiluomoStraniero]

excellent brake down of the aspects of braking!!! How does the surface area of the brake pad affect the normal force on the rotor? The caliper piston force is one thing but brake pads come in all sizes. Otherwise, excellent vid!

[@mohammedansar8435]

Vedio is really useful. I would like to know more about thermal mass of disc in your upcoming vedio

[@japerelectronics2568]

I am getting a bit confused. Your first equation Fa = Pressure x Area of brake pad seems like it should be Fa = Brake line pressure x area of piston. This would give you the Force exerted on the Pad's. The pressure (Pa) the pad exerts on the rotor would then be Fa divided by brake pad area. In the second column it seems like Pa is now Piston force Fa divided by brake pad area to give you pressure the pads exert. Multiplying that back by the pad area will just get you right back to Fa = piston force. I can't see how your last equation accounts for the pad area as it seems like Fa comes back to being the piston force on the pads. Maybe you are saying that brake line pressure gets multiplied by the area of the brake pad and not the caliper piston? Has my thinking been wrong this whole time? The only way I can visualize this working is the following. Fa = brake line pressure x piston area. (Force the piston exerts on the pads.) P = Fa / pad area T = (u * P * Theta * (D^3 - d^3)) / 24 You lose the interaction between piston and pad for me on the last step.

[@user-ch2wl6lh7o]

But he said it in the video that uniform pressure distribution is assumed

[@dharmasagarpatil8485]

Where do you stay Vatsal! Please share link of Thermal analysis of Disc Rotor video.

[@purveshisapure4329]

Hii I have some doubts regarding CFD brake disc in what way can I proceed to understand it in proper way??🙏

[@suresha273]

Hi May I know why in most cases ride rate considered equal to wheel rate for suspension spring?

[@akhilraj3777]

How can i contact you, need help with a trike design

[@jesusbermudez610]

Hello how are you, greetings from Peru. you could put subtitles to your videos.

[@user-xe7vq8uc8n]

do or D ？it is hard to distinguish

[@itstop1066]

Sir which software do you use for making such videos

[@hritviktripathi8907]

What is the value of K for two wheeler bikes ?

[@dharmasagarpatil8485]

Excellent explanation! Got it!

[@thevatsaljain]

Glad it helped!

[@japerelectronics2568]

I love this video. Are you interested in a job?

[@madhavkadam3562]

Make video on pedal how to take angles

[@thevatsaljain]

Hey, can you please elaborate ?

[@madhavkadam3562]

@@thevatsaljain make video to design pedal . How to take angles, how select the length . Which pedal ratio is good for sae baja buggy.

[@shivendrachauhan7870]

Superb ....broo ❤️❤️

[@thevatsaljain]

Thank you 😀

[@aniketdolas979]

Please make a video on calculation of g-force during collision and turning of a vehicle.

[@thevatsaljain]

Sure , stay tuned !

[@aniketdolas979]

@@thevatsaljain Yes, for sure

[@yatikshah4255]

Can we use all these formulas to calculate bicycles like bikes and cycles??

[@jmsssx]

OMG