Juki 1541S BASICS 101

[@mariehoke5763]

I had to sell my Juki, to pay for car repairs,tires, gas, tow charges ect. while I was going for breast cancer treatments and appointments. was an hour away. Was a nightmare!! 😢 Hope to get another one someday 🤞 They are great machines 👍 Even though I was intimidated by it!! 😉

[@creativitybycarilyn6634]

I have this machine and learned a few new things from this video. I have the table with casters so I can move it without asking for help. Had I known there was another motor that you can choose needle position, I would have gotten it. I also didn't know to lift the pressure foot while winding the bobbin. I purchased a bobbin winding machine that works on all bobbins and that works well too. I also didn't know about the oil port on the side edge of the machine. I will use that. My machine is very stiff and the position of the knee lift is a little awkward. I may try to lower the table a few inches. Thanks for this video!!! I suggest a video on how to adjust the machine to sew the lightest fabric it can realistically sew. So far I haven't done anything lighter than 2 pieces of outdoor canvas and a few layers of denim.

[@JukiJunkies]

Thanks for sharing your experience and suggestions! It's great to hear how the table with casters has worked out for you.

[@M_J_nan]

I'm in Sweden so it could explain differences. Mine is not an S-model but still have the guard. It has a servo motor. It has a very convenient foot pedal which you can push with your heel when coming to the end of your seam and it will put the needle in the up position.

[@kayleesmith4715]

Yay Juki Junkies! You always have the BEST videos. This is the most detailed and complete video on this machine, im glad to find it so soon after you published it. My machine sits too low in the table so the door to see my bobbin basket rubs on the table. Is there a way to raise the depth of the machine? TYIA

[@JukiJunkies]

We can help more through email! Please send pictures and describing the problem 😁 [e-mail]

[@delektaa]

HD is killing it with the fresh cut!📈💥

[@JukiJunkies]

Thank you! 😆

[@rsplatt100]

I have this machine and I love it. I make leather crossbody bags with it.

[@JukiJunkies]

That's awesome! It's a great machine for leather work.

[@cherrie1890]

Is this a straight stich only?

[@M_J_nan]

Yes

[@JC-mh3ze]

When I press on the back of the foot pedal, how do I adjust how high the needle lifts? My needle lifts but not enough

[@M_J_nan]

Interesting question, looking forward to an answer.

[@robinjohnston376]

Can you please tell me how to adjust the manual presser foot so that I don't have to have super human strength to do it?

[@M_J_nan]

You lift it with the knee lift and then pull the lever up and keep it there while letting go of the knee lift, then it stays there. Sounds difficult but it really isn't when you get used to it.

[@robinjohnston376]

Ahhh! Yes! Thank you!

[@JC-mh3ze]

You didn’t hold the tails. Why does my thread gets pull doing inside and causes jam if I don’t

[@karenpoe8057]

I need an industrial sewing machine

[@JukiJunkies]

Yes!!! 🙌

[@karenfrye7520]

I have had this machine for several years and am very intimidated.....

[@JukiJunkies]

Oh no!!! I hope this video helped put you at ease😆