JUKI DNU 1541S Overview

[@VitalityMassage]

An instructional video with no narration... just music. Brilliant.

[@jjk109]

Right? The music was horrid. I turned the sound off so I’m hoping nothing was sad because I would have missed it.

[@kaustikfix]

I have not used my Juki dnu1541s in years... With this video I can remember. /bow /salute

[@globalmilitarycollections4591]

I bought one from y’all. I’m gonna try it out today

[@emiliobalderrama185]

Thanks for the Imformation.👍

[@richardadams3987]

Ok, is it just me, or did I see that bobbin go in the bobbin case backward? I also thread all my Juki's in an S pattern through the thread guides, the more Ss, the heavier the thread. I don't mean to nit-pick, but I need to know if I have been doing it wrong all these years. Help... I am torn between the DNU-1541S or breaking with Juki and going with Consew's version of the same. With everything going online, it is harder to find a local dealer. Cutsew 8 hours away, Consew 6 hours away. Pros - Cons?

[@Noskipstitch]

I did see that too. So now I'm thinking which is the right way 🤔 but his stitches looks better than mine. I just got the juki 1541s n it locked on me. My son went through hell getting it back to sew again. I heard that the consew its a very good machine. The reason I bought the juki is bcuz the foot lever goes up pretty high. So it depends what u need it for

[@richardadams3987]

@@Noskipstitch I am a less than average sewer, but I caught the backward bobbin and the fact that setting the timing on the Juki 1541S is A LOT more involved than pressing a button turning the handwheel. He was actually re-engaging the safety clutch; turn the wheel away from you while pushing the button down until you hear it reset, then turn it towards you. Setting timing involves loosening a couple screws and measuring movement in the needle bar. They would lose hundreds of dollars per machine telling you how to do that. -Seems they could release a more honest review though, Cut Sew IS a reputable company. I cannot speak of the Consew though I have heard they are well made. Basically, as I understand it, they are all styled after the Singer 111. I grew up with the Juki family of sewing machines, other than a few Singers, they are all I have known. Sorry to hear you have had issues with yours.

[@CutSew]

Oh, so yeah, the bobbin case loads differently on this machine.

[@itsAyane]

Will this be able to sew through vinyl 20 gauge?

[@stopthephilosophicalzombie9017]

Beautiful machine. You did seem to go too thick with that leather though. How slow can you go? Do you need to change the motor to get single stitch sewing?

[@CutSew]

Just sewed slowly. No adjustments.

[@irondragonflydesign]

I just bought a JUKIdnu 1541s...Fedex just dropped it off today. Yay me. I'm trying to "put the machine together"...IE: oil pan, rubber hinge things, knee press, etc...I'm having one heck a time. The instruction manual is not easy to follow or understand, nor very helpful...do you have quick video on how to put machine on/in table from out of the box to actual using? HELP :-)

[@CutSew]

Awe man! You should have bought it from CUTSEW! We sell them fully assembled! Who did you buy it from?!?!

[@irondragonflydesign]

@@CutSew Thanks for the quick reply! Should have bought it from CUTSEW. With no preference or direction, I went with a place called SewingMachinePlus.com in Escondido CA. I put a phone call to them yesterday asking about the "fully assembled"... I called 3 times and still no reply. To say my excitement is deflated would be understating my disappointment in having spent $2,200 including $299 shipping AND still have to put it together MYSELF. Plus there was some damage to the rubber desk top bumper. Anyway don't want to beat a dead horse. I'm just trying to put the beast together so I can use it SAFELY.

[@3LGAutodetail]

are you widing the bobbin with a needle in the machine?

[@Zan_zelee]

Great vid! Is this the latest Juki model of its type? Would this be Juki’s best option for auto/marine upholstery? Any correspondence would help in my purchase. Thanks for the vid…

[@gregoryjames6051]

We use the Consew version for marine upholstery and it works fantastic. We just got the DNU 1541S and are working out some adjustments but it looks like it will be great for upholstery.

[@ejshelby5460]

Hi, please help me on this little detail. My Juki industrial machine DNU-1541, workhorse, but, when I’m working dense/thick material, and don’t give enough “gas” (I want to start slow instead losing control), the belt just spins but the needle won’t go through. Then the belt makes the raspy noise. I don’t know if this is normal or I just have to give more gas

[@CutSew]

Few questions: How old is the belt? What condition is it in? Can you tighten the tension if it's in good condition? Which motor do you have?

[@ejshelby5460]

Cut Sew hi I bought it six years ago new, from my local distributor in NY. The machine is in excellent condition as recently checked by a Juki specialist. It’s the 1541, not the 1541S, Servo motor, machine made in Japan

[@CutSew]

@@ejshelby5460 Which servo motor is it? That can make all the difference with torque.

[@ejshelby5460]

Cut Sew hi, I’d love to be able to send you a photo. Here’s what’s on the motor sticker: Family, electronic servo motor.FESM-550S, output 550 W. Volt: 110, RPM: 0-3450

[@MrAcndcco]

Can it stitch up to 1cm /10mm of leather knife sheath

[@lisawarnke1641]

Why didn't you go through those holes at the beginning for the bobbin winding? Manual says to.

[@CutSew]

Crazy machine techs do all sorts of crazy stuff. His method works for thousands of machines daily, running two production shifts, but I always follow the manual too.

[@margarethanson50]

wondering how much for that machine Juki1541? is this come with table gather include? and where is made from? I seem like that machine..

[@CutSew]

Ours comes assembled. It's made in a Juki factory. Their production centers are worldwide. Check out the cost here: www.cutsew.com/juki-dnu1541s-walking-foot-sewing-machine

[@worab1]

I want a Juki 1541!

[@lindabee6819]

Is there a video that shows how to do routine oiling? Or is this machine truly self-oiling?

[@CutSew]

Yes, it is a self oiling machine. Unlike say, the Consew 206, which has lots of little spots to oil

[@jjk109]

@@CutSew what?? It’s self-oiling? How is that possible. The manual shows how to oil it.

[@robertharris9584]

What needle size did you use on that thick nylon please?

[@CutSew]

The standard size 23 needle

[@farhadfadayi7389]

thanks for great video. may Iask what is different between 1541 and 1541S?

[@CutSew]

S is for Safety. Prevents breaking the hook.

[@farhadfadayi7389]

@@CutSew thanks for raply

[@farhadfadayi7389]

@@CutSew I've bought juki ddl8700. I couldn't buy from you because am in Netherlands, because I couldn't pay import TAX. but I love your accessories, maybe I'll try some.

[@larrystehle7548]

I'm considering buying one but I'm Juki-hesitant because a 1508 I had was a junker from the start. And are the user manuals still printed in near undeciphereable language? If so, I'll probably go with the Pfaff.

[@alfred-mi2wt]

…lol… don’t buy it. It’s over hyped. I switched back to my Consew.

[@zoeingram]

Do you have speed reducers for this machine?

[@CutSew]

No. You only need a speed reducer on a clutch motor. Our machines come with a servo motor. There is a speed control on the servo which allows you to slow the machine down.

[@mikecol99]

Threaded wrong too. Missed S before Tension disk, Missed guide after check spring.

[@mikecol99]

Best pict showing correct routing is pg 13 of the manual. Shows both items above.

[@CutSew]

Crazy machine techs do all sorts of crazy stuff. His method works for thousands of machines daily, running two production shifts, but I always follow the manual too.

[@CatCatGun]

Can i sew a 1000d cordura folded 8x in this machine?

[@CutSew]

that should probably clear the foot. Mesasure and compare to be sure

[@CutSew]

To see more visit www.cutsew.com/Juki-DNU1541S-Walking-Foot-Sewing-Machine

[@ejshelby5460]

My bobbin winder won’t stop by itself (the stopper useless), so extra thread get wound onto the rod

[@CutSew]

Who did you buy this from?

[@andreasbraun8602]

What size thread were you using in this video?

[@CutSew]

69 Nylon

[@CutSew]

Tex 69

[@PerryRhodan5000]

Bedienungsanleitung gelesen?

[@marywatson7844]

Enjoyed the video but would have loved if it was talking us thru it instead of music.

[@CutSew]

noted...more talking points in future videos. Thanks for the useful feedback! 😀

[@taiwomubashirah3196]

How can I get one

[@CutSew]

Unfortunately the entire United States is out of these at the moment. If you can wait a couple of weeks, then just place your order on CUTSEW.com www.cutsew.com/juki-dnu1541s-walking-foot-sewing-machine

[@saisengamer7717]

Lever full down nahi ho Raha hai

[@hashimp8945]

Praice

[@CutSew]

$1866 assembled

[@manojseatmaker3556]

Price

[@rocc05rx8]

Google.

[@EunKort-m3v]

Bergstrom Cliffs

[@mikecol99]

Bobbin put in holder backward. Should be CW not CCW.

[@CutSew]

Lol. How so?

[@mikecol99]

@@CutSew Your bobbin rotates CCW at 3:24; should rotate CW from Juki Instruction Manual pg 19, item 7 Threading the bobbin: section 2): "bobbin rotates in direction B when thread is pulled".

[@WinfordMorgante-t5z]

Ruecker Flats

[@WilfredoSantorelli-y2z]

Dameon Groves

[@AmberKing-j8i]

Lilla Flats

[@KennethMusser-z5r]

O'Reilly Landing

[@alfred-mi2wt]

Dammit. I paid over two grand for this machine and the main problem I’ve been having is the fact that the bobbin won’t stay in the carriage. It keeps vibrating out. Everything about this machine was awesome until that bobbin started freaking out on me. I took that head and switched it for my old Consew. I’m pissed. I had to wait over three months while it rotted in a container on a barge somewhere outside of New York. This machine turned out to be a major disappointment. I’m gonna replace the bobbin housing and dump this pile of shit. If any of you buy this machine, monitor its behavior and watch that bobbin. I’ve already bent and broke over five needles. Before this I hadn’t broken a needle in 15 years. Has anybody else shared this malfunction? Jeez. I gotta be the luckiest guy alive. 🙄

[@AddisonLionel-d2d]

Hansen Canyon

[@GarthAno-r5b]

Stroman Loop

[@EstherMontague-f9b]

Ursula Knoll

[@tawandanyambo1105]

Hi hello

[@BettyJohnson-i4h]

Kayli Land

[@Coleen-Love]

Turn off the damn music and just do the review

[@MGM-ej8wx]

Hello, I’m wondering what servo motor comes with this 1541s? Do you offer a digital servo motor that includes the needle positioned? Thank you.

[@CutSew]

We're about to add that option to our website due to folks such as yourself. Thanks!