Juki DU-1181N knee lift trouble shooting/setup

Juki DU-1181N knee lift trouble shooting/setup

[@Olivers-G0mmer]

It amazes me that you go to such lengths to help your customers get set up with their machines. 👍 Buying my first industrial was a big step and a little bit intimidating, but you made it so easy with all the videos and the pre-drilled holes and the pre-assebled parts to show where everything goes. That machine is by far my favorite and if I had to pare down to only one, this 8100e/HX would be it. I'm sewing a lot of fine jersey knits, lately and it's a gem! if I go back to bag - making, all I have to do is change out the needle plate and feed dogs and make a couple of small adjustments - it's truly just as versatile as I could have hoped for and that big M bobbin is the bomb! I am a SewingGold fan for life! 💜💛💚💙💜💛💚💙

[@Sewinggold]

Happy to hear you are loving your machine and us of course.

[@kennethcolbert2921]

I think if anyone needs help with their industrial sewing machine Steve is the man you want to talk to he has a lot of good videos on industrial sewing machines out here for us to learn by.I order a Singer 191D-30 a few years back and it's a working machine for sure.I now setting up a Singer 20U machine little by little he can get you just about any part you need or want.It's going to take a while before I can get my other sewing machine up and running but I know what I have to work with too far as I care Singer sewing machine is the best or they are for me.Thanks Steve for all the help you have giving me and all the other people you help here.

[@Sewinggold]

You are most welcome Kenneth. Thank you for the kind words.

[@ceciliaschwalbenberg691]

Wonderful! This video taught how to fix my knee lift. Now all I need is a video on how adjust the foot pedal so it doesn't take off so fast.

[@dilipshimpi4917]

Dear Sir, you did really really very good job. .. Useful for everybody who uses these machines.

[@Sewinggold]

Thanks for the compliment!

[@iheartbridalcouture5989]

A million thanks!!! Omygosh!! My handwheel was so tight so I adjusted that. My knee lift was exactly up just like in the vid. I thought there's no way I can get that knee lift in there. So I released it and was able to assemble it.

[@Sewinggold]

Glad it helped!

[@yelisco]

thank you so much for this, I set up my machine incorrectly and it was set exactly as shown. you helped me out so much!

[@Sewlsista12]

you are so awesome. I wish I had purchased my machine from you. Your customer service is phenomenal.

[@Sewinggold]

Thank you Angie!

[@katski8720]

It works now! Thank you so much. 😃

[@Sewinggold]

Glad to hear in Katrina. Please let me know if you need anything else.

[@TERRIDONEY]

You’re the best Steve! Thank you 😊

[@Sewinggold]

You are making me blush Terri. 😊

[@arek2uk]

I’m collecting my yuki DDL 8850 tomorrow. It’s a second hand machine. It works well but needs a good clean and tlc. I’ve noticed the knee lift is not working which I will need to fix it. Hopefully this video will help me in fixing it.

[@katski8720]

Thank you Steve! :)

[@Sewinggold]

You are welcome Katrina.

[@nicolasrojas9195]

Gracias maestro saludos

[@ramarao4068]

Thank you sir

[@Sewinggold]

You are welcome.

[@PravinPatel-xs5nk]

I have juki sewing machine I facing problem some few days,sewing machine running some time fast and some time slow,it very much distribute on overall performance

[@rushikeshjadhav3405]

👍👍👍👍👍

[@Sewinggold]

Thank you.

[@jos.4276]

Can you link to the video that shows how to make the knee lift easier to use? Mine's REALLY stiff. It nearly moves the entire machine when I use it. Thanks.

[@amarrakiara]

I am still having trouble after watching this. My shaft won’t tighten with the screw at the top. It stays loose 😩

[@Sewinggold]

Please email me some pictures or better yet, a video. [e-mail]

[@donnanelson9181]

Can this be adjusted on a Juki 2010Q? My knee lift bar sits so far to the left that I cannot use it. Thanks

[@jalangstead]

Can you help. I’m struggling to operate the knee lift and pedal (ie lifting foot off pedal to then get to knee lift)

[@inspiringvideos1708]

how to fix clutch brake not working

[@Sewinggold]

I'm sorry, we have not done a video on that yet.

[@74kdiva]

I have this exact machine & I’m having trouble with my knee lift. A screw fell out. I’ve replaced it. But I’m no longer getting any resistance when pushing on the knee lift. I’d ya possible to get your setup DVD so I can troubleshoot my machine? I’m unable to find anyone to repair it for me. Thx.

[@Sewinggold]

Email me a picture of the screw and where it fell out. [e-mail]. Unfortunately we do not sell our set up DVD.

[@jalangstead]

Can I have the knee lift on the left hand side

[@swordfish1120]

Do you ever set up pneumatic presser foot lifts on your machines?

[@Sewinggold]

I have not seen this on the DU-1181N before.

[@bobjensoddsandends8895]

Is this suppose to be super hard to push? I almost cant even push it to lift it, it's so heavy

[@Sewinggold]

It should not be difficult with your knee. By hand it is a bit tight.

[@mahmad2635]

Sir paidan no up down please

[@Sewinggold]

Do you have the knee lift push rod? It is a small black part that looks like an umbrella. It goes in the oil pan.

[@MrShah-pu6wl]

Oiltanklink

[@ayanmolla1530]

Thank you sir