SKIPPING STITCHES AND SHREDDING THREAD!? (REASONS/ SOLUTIONS)

Thank you for watching our videos we truly appreciate every viewer. If you have any questions drop comments below :) Share with a friend!!
Needle video - • What Sewing Machine Ne...
Shop - Jukijunkies.com
Join our Newsletter to get all the latest and greatest info/ deals - jukijunkies.com/newsletter-si...
Contact us
Shop # - 813-661-9000 / Cell 813-376-5015
Email - [e-mail]
Join our socials
📲Join our fb group / 1532238067076220
(This group is great to learn more about your Juki, share experiences and to make the Juki community even stronger.)
📲Download our app - “Gigi’s Fabric Shop” in your app store
-Join our Instagram @JukiJunkies @gigisfabricshop (Tons of behind the scenes)
📲Check out the live shows/online fabric/notions/and more gigisfabricshop.live/live
-Join our TikTOK / gigisfabricshop
#jukidomestic #jukisewingmachine #Jukihelp
#JukiJunkies

[@ChrisMurren-nh5on]

Thank you so much! I have used a TL 90 for close to 2 decades and it just now has started giving me fits with skipped stitches etc. Great brand!! I have learned more from this short video than talking to my local repair guy. Now I know what to look for to see what is causing the problem

[@kstorts7348]

I just experienced the “shredding” while free motion quilting. I first re-threaded the machine and the bobbin. Happened again I took the stitch plate off to clean and discovered it was a burr on the stitch plate. The fine side of an emery board took care of it. However, I lost one of the screws LOL (not in the machine). I’ll be calling to place an order 😊

[@JukiJunkies]

I am glad you fixed it :)

[@darylcatherineholt7852]

I always say, “good machine use good thread”.

[@Kera.S.]

I turned this video on and to my surprise, a familiar machine. I paused... I have a dx7 and it has started skipping stitches then progressed to shredding thread, and on to breaking needles... I was trying to finish my daughter's c'mas gift and thank goodness for at least 1 procrastination and I didn't give away my old machine. Wow, she's only in town a few days, so out came the basic B(rother). Once I figured out how to sew raising the presser foot by hand, with no speed control or needle positioner I was fine and finished sewing tons of minky fabrics without issue. So what do I need to do with my machine? It catches, shifts from side to side, goes wacky and shakes. There is a certified juki mechanic in my town so I'm thinking of calling them after the holidays. I'm sure there will be quite the wait! I might call the local quilt shops close by and see if they recommend anyone too. Any other ideas would be appreciated or fixes to try 1st. I still have a few things I need to make. Lol

[@JukiJunkies]

it sounds like the bobbin case has a burr and possibly bad timing...

[@GramsAlen]

❤Awesome. I’m so happy to have found your channel! I have a Juki F600 and am still familiarizing myself with self with it.😊

[@JukiJunkies]

:) We are glad youre here.

[@merlyndamirasoldayto3180]

yes, mine was dirty. I have a juki lb5100 which is a computerized machine. I was going nuts. Thank you for your detailed tutorial on how to clean it.

[@JukiJunkies]

Glad it helped!

[@Jacarlson37]

Thank you for another great informative video!

[@JukiJunkies]

You're welcome :)

[@Kera.S.]

I have more issues with my needle stand than when not. I've even used thread nets. I resorted to a big jar and it worked until it started the skipping, shredding, needle breaking mess I mentioned in another comment.

[@chimknee]

Thanks. Merry Christmas 🌲

[@JukiJunkies]

Merry Christmas :)

[@jukistudio]

WOW AMAZING VIDEO TO WATCH ,THANKS FOR SHARING

[@JukiJunkies]

Glad you enjoyed it

[@OnRavensWings49]

Clean machine with proper needle threaded correctly and skipped stitches still happen, mostly when a seam pressed to one side is sewn with a single layer or another seam. The next 2-5 stitches are skipped and then machine continues to sew perfectly. I have compensated by shortening stitch length to 1.8 or so and adding a layer of tracing paper over the seam and sew through it. Cannot send photo with poor weather/internet service🥴

[@robinacuna113]

I just bought the small glide threads from you guys during the sale you recently had and I’m wondering what size spool cap I would be using? I didn’t even realize that was something to consider

[@JukiJunkies]

This one jukijunkies.com/product/small-spool-caps-set-of-2/

[@gretadoute1090]

Can i use a good needle from other needles company's?

[@JukiJunkies]

what needle brand?

[@user-bh5fh8rm1g]

I have a TL-2000Qi. Pretty sure I have a burr or two in places that I can only get to by working on the part that spins around the bobbin casing (a loose needle went in sideways, argh). I took off the feed dogs but could not get any farther. Do you have a video for the next step in taking apart this assembly, or is that just a step too far for us amateurs?

[@JukiJunkies]

We don't... I would recommend bringing it into a service tech to take a look at it.

[@kimberlyann1029]

You guys rock! Here's my situation. TL2010q machine. I open it up and clean after every project. Fresh quality needle. Properly threaded. Aurifil thread, top and bobbin. It's doing this weird thing where the bobbin thread seems to catch on itself and tangle. Accompanied by a little almost clicking sound. It's been happening for a while. I've tried everything. Help me!! Please!

[@nancy9478]

You may have a burr or nick in your bobbin case.

[@Scorpio-gb8ss]

10:58 the link in the description 🤔🤔

[@JukiJunkies]

Fixed :) kzbin.info/www/bejne/gZfUZp14rq6mkKssi=0SRA4YMa5DXT7ZRV

[@cindysakala9641]

My JUki TL2010Q usually sews beautifully. However, when I do free motion quilting, the thread starts to shred. The needle is splitting the thread as I’m sewing. Very frustrating! I use a hopping foot and a ruler with free motion. Quilting left to right and backwards is where the problem occurs. I’m using Superior Sewfine thread and a 80/12 needle. Any suggestions?

[@JukiJunkies]

try some glide 40w!

[@cindysakala9641]

@@JukiJunkies I changed my top thread (didn’t have any Glide) and it’s sewing like a dream.