Bag making accessories for Juki TL machines

[@8machines62]

Wow! Thank you. It’s hard to believe it was 2 years!

[@jencl3863]

Thank you so much. This is the only Juki 2200 vid that I’ve found super useful (as a bag maker but even just in general)!! Also the first one that actually said what the max thread weight is!!!

[@valerieherrington3124]

Bought my Juki for bag making. Enjoyed this video!!! Thank you ❤️

[@cherylbrown4265]

Absolutely love the compensation foot that came with my 2200 for applying binding. Another must-have is the piping foot.

[@lidabard2121]

Thank you for all the useful information. In future when you are demoing a foot could you give a camera shot? You did for the quarter inch foot but not for the 1/16 or 1/8 feet. Also, it would be helpful to see the back side of your sample swatches. Did you mention what bobbin thread weight to use when stitching heavier projects? What weight is the prewound bobbins you sell? Thank you again for this great information.

[@JukiJunkies]

Lida for best stitch quality results we recommend always using the same weight thread on the top and the bottom. For heavier projects check out how to use industrial thread on this machine here kzbin.info/www/bejne/ioKQqX-OZah1hZY The prewound bobbins we sell are 40 weight (the same weight thread we used in this video)

[@JukiJunkies]

Thank you for the suggestion

[@jillbruce3624]

Thank you. Good info on the schmetz needles.

[@JukiJunkies]

You are welcome!

[@barbarahautsch7232]

Great information. Looking at all that thread is like being in the candy store.

[@JukiJunkies]

YES IT IS!

[@jacquebomann7232]

The sound was great , really good video. Thank you

[@JukiJunkies]

Glad you enjoyed it!

[@kathiereeves3213]

Great information. Thank you for the show n tell!

[@edelweissquiltingembroider1761]

This was wonderful!! Thank you for the great information!

[@deirdrebhandmade]

Learned a lot - thank you. I have a thicker throat plate but am struggling to fit it. Could you show how to connect it please.

[@JukiJunkies]

kzbin.info/www/bejne/amrPkoRpaKZ8e7s We have a old video but hopefully this helps still

[@jonimeguire9230]

Fantastic helpful info. Thank you!!

[@emmadeia3461]

What an awesome video!!! Thank y’all so much for all this great information!!!

[@JukiJunkies]

You are so very welcome. Visit us at jukijunkies.com anytime.

[@NanaDutton]

Great video BUT the sound is very hard to hear. Speakers maxed out and I couldn't make out all the words. Please move mic closer for the older people like me that are a little hard of hearing.

[@kristinehammerbacher378]

Also thank you for the video. It was very helpful.

[@jaykay643]

Excellent video. I need to make hundreds of medium weight bags with outdoor landscape fabric, I wonder how long this machine would last compared to say a Juki DDL-8700

[@JukiJunkies]

Keep it well lubricated and clean and you should be good to go :)

[@scottydog6539]

Thank you

[@elizabeth4053]

Awesome video ❤

[@JukiJunkies]

Glad you liked it

[@shanni77]

Great video Thanks! Whenever I use my 1/8 hinged zipper foot I get loops on the underneath. Do I need to adjust my tension every time I use it? I can’t figure out what I’m doing wrong. When I switch back to my regular 1/4 foot I have no issues.

[@JukiJunkies]

Be careful when you are using that foot, if you are topstitching something that is very thick that foot is very skinny and may not be applying enough pressure to get that beautiful consistent stitching. So you might have to adjust your presser foot pressure or if you’re working on the TL 18 use your micro lifter. Also if you’re find yourself getting loops or skipped stitches you might need to use a stronger needle that gives you a bigger eye on the needle to create larger loops so it can stitch trough the layers

[@markamiller6202]

I’m truly greatful❤

[@JukiJunkies]

THANK YOU :)

[@gergemall]

Wonderful video ❤😊

[@chiarascerrato9957]

Hello, thank you for all the great videos you offer. Just a question, are the presser feet the same for all the TL machines, including the TL 18QVP? Thank you

[@JukiJunkies]

Yes, absolutely

[@contagioncreationsnyc]

Hi… do the prewound bobbins (Glide) go into the machine without the metal bobbin? I’m not clear on what the magnet is for and haven’t seen anything but the metal bobbins going into the TL-2010Q.

[@JukiJunkies]

Here is a video on them :) kzbin.info/www/bejne/in7cpqyPisZrlaM

[@craftynurs3434]

Do the tl feet fit industrial sewing machines like the 8700 or 8700H?

[@JukiJunkies]

Yes :)

[@craftynurs3434]

@@JukiJunkies thank you for confirming. Does the 8700 have a walking feet attachment?

[@AdamantErinyes]

I'm trying to figure out if there's a difference between the tl-2010 and the new tl-15. It seems the main difference is the accessories included, but then I was curious why Juki felt the need to make it?

[@JukiJunkies]

I totally understand, we don't know the future plans of Juki but something could be changing with other models that would make this model more important.

[@dcwatashi]

Don’t you mean the TL 18

[@marlenecarvajal3857]

Is there a roller foot for the TL machine?

[@JukiJunkies]

No

[@celiajean7093]

Wow, just stumbled on your channel. Would you know if I can use any of these feet on an industrial model Juki?

[@JukiJunkies]

I don't think so..

[@elainestephens5906]

If you are changing out your needles all the time, how do you store your needles to made sure that, if you are not throwing away the needle, but just changing it out, how to make sure you know which needle you are taking off and then storing the needle?

[@JukiJunkies]

Good question maybe a old needle package.. and just label it.

[@dcwatashi]

No mention of whether or not you can do a reverse stitch when sewing on the leather

[@JukiJunkies]

You can :)

[@martham1231]

What table do you have the Haruka on? Also does that table lower to flush position?

[@JukiJunkies]

Yes it does! You can even get a custom insert for it. Here’s the link jukijunkies.com/product/gidget-ii-sewing-table/

[@franwessel746]

What do you know about the Juki DDL=5550N

[@martibrown2993]

Where do you get your decals?

[@bargeiger50]

Can you sew with a double needle on this machine?

[@JukiJunkies]

Nope, this is strictly a straight single needle stitch machine

[@viddy8379]

You said that machines only take up to size 18 needles. But you showed a 20?

[@dcwatashi]

I just replayed the video I didn’t see any size 20 needles that she was showing

[@lindascraftsandthings915]

Hello! I am interested in getting a Juki sewing machine. I would like to make microwave bowl cozies, zipper bags, and small clutch/purses. I would like to get a good machine that will last years and that would handle projects made using: 100% Cotton fabric, 100% Cotton thread, wrap n Zap soft genuine leather Marine vinyl Which machine would handle the above projects? Are there any more on the industrial side Juki sewing machines, but for a small home business. I need to be able to use 100% Cotton thread in any machine I get because the bowl cozies would be placed in a microwave. Thank you very much.

[@JukiJunkies]

Hi Linda, It sounds like the TL-18 is the machine for you. It is a semi industrial sewing machine that loves 100% cotton thread. It has tons of power that will be great for the projects you talked about. Feel free to call us 813-661-9000 between 10am-4pm est M-F or email us at [e-mail] if you have more questions. -HD

[@elainestephens5906]

Would love to know where you found your leather

[@JukiJunkies]

gigisfabricshop.live/products/sallie-tomato-faux-leather-12-yard Check this website out

[@nakshipolly5666]

How much is this sewing machine tar model?

[@JukiJunkies]

You can see all of our current pricing on Jukijunkies.com and call 813-661-9000 to see if we have any specials going on at the moment :)

[@linheflin2544]

Which machine are you using in the video?

[@JukiJunkies]

The Juki Tl-18

[@desencanavar9486]

Yorum yapana çekilişle makina hediye olsa iyi olabilirdi 🤓

[@frozenyogurt0428]

❤

[@jaywinters2483]

Thanks for not ruining it with music-noise. (Otherwise I would not even watch it.)

[@heatherparsons4879]

As an overseas viewer, I would ask you to speak a little slower as your accent swallows a lot of your words. You speak VERY quickly and it is difficult to follow at times particularly when telling us the accessories. Otherwise interesting video. Had to watch it a few times to get all the names of the accessories.

[@dcwatashi]

Trust me it has nothing to do with the fact that you are an overseas viewer. I am an American citizen and I can’t even pick up all the words she is saying. She talks way too fast I think she has had several cups of coffee before filming Under the description box if you scroll down on the right you will see the word transcript. Even though it is an automated transcript program you still might be able to pick up on some of the words. It follows along with the video so everything is time stamped

[@modernbygonecrafts6100]

I am a bag maker and quilter. Once I switch to the thicker throat plate for bag making, can I leave it in for quilting? Or do I need to switch every time I switch projects?

[@JukiJunkies]

You can leave it :)

[@LenaMellow]

Please link the needle book, I’m having a hard time finding that pdf. Thank you!

[@JukiJunkies]

gigisfabricshop.live/products/schmetz-needle-pocket-bible?variant=6304

[@supportmuslims9344]

Can any body donate this machine for me 😭iam needy

[@TheDiane48]

Where can we buy the leather?

[@JukiJunkies]

Online or a local leather shop.

[@TheDiane48]

lol..that's fairly obvious. Where did you buy yours? Can you give a referral?

[@craftyirina]

Fantastic info!!!! I will be shopping soon on your web site! 💕

[@yeaz0317]

So happy I have found you all love all the information and I was wondering if you could do a video on the TL 2010 Q foot pedal. My foot pedal keeps cutting the thread when I don't want it to, I even bought the rubber stopper that goes on the bottom and it still cuts it every now and then. Is there any pedal I can buy to not have this feature? Is there a way to disable the cutting feature on the pedal that I have? Is There a foot pedal recall, I've read from other comments that there was a recall in the newer 2010Q's foot pedal?

[@JukiJunkies]

Sounds like you might have a faulty foot pedal. Contact your Juki dealer and they should be able to swap it out for you :)

[@JukiJunkies]

Call us if you have additional questions we can always help you out 813-661-9000

[@arashid3989]

I want to order the tiny zipper foot for my Haruka to 18qvp

[@JukiJunkies]

Give us a call 913-661-9000 10am- 4pm est or check out our website here jukijunkies.com/product/hinged-zipper-foot-2-5mm/

[@lisawhited4291]

Great tutorial!

[@kimberlyf4024]

Would that quarter inch compensating foot be ok to use to apply quilt binding? Thanks for this video. It was so helpful. I'm just getting into bag making. Yet another way to spend money!!

[@tomg7104]

What TK machine are you using?

[@JukiJunkies]

TL-18

[@kristinehammerbacher378]

I love the hinged zipper foot but I always have to switch it out for top stitching. It does not top stitch well for me. I have the TL18.

[@Renuewspa]

Great info can you show FMQ with the clear table on TL 18 QVP

[@savingmyself8802]

Hi, I'm not a quilter nor am I a bag maker. I only garment sew at this time. Is the glide thread a good option for garment making? Thank you

[@JukiJunkies]

Yes, you can use it for Garment construction. I personally use it when I sew my clothes. Gigi

[@lilianacolli8435]

♥️

[@UpstateMarc]

How would this machine handle bulk such as with a Byannie bag?

[@JukiJunkies]

Just fine.

[@gwennadoty7374]

Where is the video for using the thicker thread?

[@JukiJunkies]

kzbin.info/www/bejne/ioKQqX-OZah1hZY

[@roxannevangelder]

Hi , Where do you get all those pretty stickers people use for their Juki machines. Thanks

[@JukiJunkies]

We had a friend make them for us :)

[@elainestephens5906]

The pre-would bobbin with magnet center works on the TL18QVP?

[@JukiJunkies]

Yes