Jumper T-Pro Dual Momentary Switch Arming (OpenTX Tutorial) 🎓

[@AlbertKimTV]

🛒 Jumper T-Pro BG - bit.ly/3eTwadD (coupon BG6997bd for 10% off) MF - bit.ly/3zdflDE (coupon ALBERTKIM) XT - bit.ly/3FNcbZH AX - bit.ly/32F6qir 🔋 18650 Battery - bit.ly/3zh380T 🍿 Jumper T-Pro Review... kzbin.info/www/bejne/fWfTnXyQdq6ch68

[@rickybanman]

Now I like this radio even more! This is a safer method of arming than a normal toggle switch imo. Great work!

[@AlbertKimTV]

Glad you like it! Yeah, I have been using this for several flights and it takes a little getting used to, but I'm liking this a lot and it's safer all around as long as you understand it's different than using a normal arming switch.

[@Fang2555]

Is it really safer than using a standard switch with a prearm switch? I use a toggle + momentary for prearm on my tango2 and I feel like that would be safer because I don't have to fumble for a second button to disarm

[@noleo]

Yes indeed. I myself don't feel safe to arm/disarm with a normal toggle switch together with others. I used Function switch 1 instead. But for people who prefer the switch at the front right location, they can use the VR Pot as a switch as well. Add a 4 point curve to change that Ch5 to be a step function for -100 to +100

[@vanlifefpv6340]

Thanks for the tutorial. Jumper should pay you big bucks for this workaround!

[@AlbertKimTV]

You're welcome!

[@DougEfresh.]

Wow that's alot of information. I will need to watch this several times for it to sink in just because it's something new. I'm so used to flipping switches instead of pushing buttons. I think I'm going to wait though until the one with the internal elrs comes out. It's winter here anyway, so no biggie on waiting. I love all the info you put into these videos. Very thorough for sure and it looks like you're the first one reviewing this, so that should be something for everyone out here to take into account that you are top dog, thanks so much.

[@AlbertKimTV]

Thanks... so much new stuff is coming out so if you don't need anything immediately just hang on until I get all my videos out.

[@ndtran9913]

Thanks for making this dual momentary useful. I like this arm - disarm set up.

[@AlbertKimTV]

Glad to help

[@lifetimeofwork]

Thank you!! I couldn't figure out how to setup a proper arm switch, much less this excellent idea of dual buttons. Appreciate it!

[@AlbertKimTV]

You are welcome!

[@lomtikster]

Finally, setting up the double arming on my T-Pro after accidentally shutting down my drone over an island in Thailand and searching for it in the dense forest 😅 Thanks for this tutorial!

[@peteyfpv2217]

kinda like that arming set up i am going to try this when i get my T PRO thanks Albert Kim

[@AlbertKimTV]

😎

[@gandaulf_fpv6925]

Always the man with the info. Thank you wildman!

[@AlbertKimTV]

My pleasure!!

[@danielsimental2803]

This video is gold. Thanks, Albert!

[@AlbertKimTV]

You're welcome!

[@ChuckLeone]

Exactly what I was looking for. Thank you

[@AlbertKimTV]

Glad I could help!

[@eugen8771]

Such useful information! Thanks a lot for this tutorial!

[@UNLOCKEDANDOVERCLOCK]

Thank you that was a great video tutorial I just setup my remote to where I can use it for arming and disarming didn't even know how to do that thank you so much any other cool tutorials with this remote would be greatly appreciated

[@AlbertKimTV]

You're welcome!

[@robertlanyon3528]

Very happy that when you turn your remote on it's always in disarm even if for a stupid reason it's armed whenever you shut your remote off it still goes back to disarm thank you very much very much so appreciate it

[@AlbertKimTV]

😁

[@MCsCreations]

Fantastic, Albert! Thanks a lot for the tutorial! 😃 Happy new year! And stay safe there with your family! 🖖😊

[@AlbertKimTV]

Happy new year!

[@CgitEinsteins]

wow,, openTX can do things like this

[@venomlicious1064]

Om Cgit secara sekilas lebih memilih Tpro apa Zorro Om? Kasih rekomendasi Om.. Makasih .

[@AlbertKimTV]

Yes

[@JAMP1865]

Thanks for the tutorial, you are one of my biggest inspirations. Since the function buttons (1-6) have a led, I’m using F1 as my arming button, you need to go to the logical SW page and select 2 pos and put a dash - in the right column, so the F1 SW don’t get cancelled when you press another F button

[@AlbertKimTV]

😁

[@RobertoCamachoNoellySerrano]

I'm falling in love more and more with this TX and I think that safety measure is a must, Thanks!!!💯 PS. Waiting on that Teardown!!!😁😁😁

[@AlbertKimTV]

😁

[@jasonleesuffolk]

What buttons would you use for camera and video capture?

[@hendranandradrone7064]

Good, thank tutorial video 👍👍🙏

[@AlbertKimTV]

Welcome 👍

[@josephfreeman5289]

thank you, this helps me on for my tx16s. i want to use 2 position as "ready to arm or disarm, then the momentary switch to arm and disarm depending what position the 2 position switch is in

[@AlbertKimTV]

Yeah, that's another way to set up a safety mechanism.

[@samgraham9754]

Awesome, just done this to my T-pro, recommend!!

[@AlbertKimTV]

Great to hear!

[@joyyen08]

hi @Alber kim i want thanks for the dual Momentary Switch Arming tutorial but i want to ask how to setup up the Left switch SC! to also works with the Crash over flip function? if i follow your tutorial I cannot arm the quad as my left switch is set as crash over flip it means both switches are flip together

[@AlbertKimTV]

You can't with this method. Both momentary switches are dedicated to arming. You would need to setup another switch for that function.

[@chukchannel4569]

good reviews. is bay t pro module the same as t lite?

[@AlbertKimTV]

The module bay is the same size but the electrical setup is different.

[@zipppiz]

I'll receive my controller tomorrow and thinking about upgrade directly to EdgeTX. Would this guide apply to that as well?

[@AlbertKimTV]

It should work the same way in EdgeTX though some of the menu items might be in slightly different spots.

[@zipppiz]

@@AlbertKimTV thanks Albert, guess I will give it a try and hope I can figure it out 🙂

[@rchobbyer]

Have more range in the internal module compare to T Lite?

[@AlbertKimTV]

It's the same 4-in-1 internal module so the range will be the same.

[@rchobbyer]

@@AlbertKimTV and how does the control improve having 2 cells?

[@system4kfin.997]

Albert, hello! What do you recommend to do with batteries which voltage went lower 3v? Just utilize them or not? Is it a big risk?

[@AlbertKimTV]

Don't recommend letting the voltage go below 6v (3v per cell). The radio might turn off unexpectedly.

[@danielpoulin19]

have you tried the t-pro on simulator?is it easy to set up?

[@AlbertKimTV]

It wasn't working on mine. They told me it will in a firmware update.

[@danielpoulin19]

@@AlbertKimTV ok good t know,thankyou

[@micsherwood4930]

BRILLIANT!

[@stevemann6082]

nice little radio, but i would rather a toggle or latching switch , that antennae needs rotating 90 slightly bigger screen . those are my moans but i do like it. thanks for showing the work around.

[@AlbertKimTV]

Yeah, the latching switch would have been a much better decision. Oh well...

[@index7787]

I'm still looking for the "perfect transmitter"'. or at least the best starting point and I can circuit bend it to my will from there. I'm still using a frick'n Flysky NV14 nirvana. Had to reflash chips on the board to unlock it from factory and I've been running a custom firmware I coded up for it.

[@AlbertKimTV]

Where did you get the info on how to unlock it from factory?

[@richardburrows1610]

Can you do this with a TX16S? I think having a double disarm would be safer. If so, how?

[@AlbertKimTV]

I don't think that radio has dual momentary switches so the method would be totally different. You might be able to use the AND logical function with another switch but you'll have to remember to toggle that switch along with the momentary switch so it might not be all that easy.

[@akbarfoto]

i see on the monitor that channel 4 is not centered and reading 1.5. do you experiencing gimbal drift? even after you calibrate, after sometime (usually after one day and after power cycle) the gimbal drift again. that is what i experience on the t-lite.

[@AlbertKimTV]

Yeah, I need to run the calibration. I have not done that yet on this radio. I have not used this enough yet to tell you how much drift it has (or hasn't). Follow up videos will be coming later so stay tuned...

[@akbarfoto]

@@AlbertKimTV this i'm looking for. also do more of those opentx/edgetx video like the one you did. a real nice tutorial

[@rctom1]

I think it´s a nice Radio but the set on BG with module and rx is now up to 145$ and only Mode 2 , don´t know if you can chance the mode easily.

[@rctom1]

Thank´s for the aswer of my rejected quest, i saw it in your first review. Happy new year and all the best .

[@AlbertKimTV]

It still shows as $127 for me. I'm in the US. Maybe in your currency the price is different?

[@brandonbell359]

Just a heads up, your BG coupon code doesn't work.

[@AlbertKimTV]

Yes, it seems it expired on 12/31. I am trying to get it reactivated. Have you tried Drones8? That might work too.

[@brandonbell359]

@@AlbertKimTV Drones8 didn't work for me either. Not a huge deal. I'd be interested to see a comparison of this and the zorro anyways. I'm currently on 900mhz eLRS, but I could be convinced to swap my 2.4 stuff if I could have it all on one radio without having to swap modules.

[@Fang2555]

I feel like I'm going crazy, everyone is saying they like this radio and this makes things safer, but most flight control software already had prearm options? Not only that but wouldn't this theoretically slow down your disarming, since you have to fumble for 2 buttons, thus making this solution less safe? The dual momentary switches along with the weirdly large antenna are just strange oversights that I would not expect, and I struggle to understand why anyone would pick this radio over the Zorro, but I guess that's just me. Great tutorial as always Albert, super useful despite the weirdness from Jumper

[@AlbertKimTV]

I've been flying with this setup and have not had any issues with disarming. It just takes a little bit of time to adjust. I'm just as fast as with a single switch. Some people don't like the large screen of the Zorro, some people don't like the large antenna of the T-Pro. Everyone has their preferences. So just pick what is good for you.

[@Fang2555]

@@AlbertKimTV guess it just isn't for me

[@noleo]

This is great and a safe way. I have tested the alternative which worked fine for me. 1) Create logical switch L01 as a>X with input from S2 ( right VR pot), then set X= -90 (or other desired trigger point). 2) Assign the L01 switch as CH5 source. Slide to left dead end as -100, a quick slide to the right passing the X triggering point as +100. You have enough dead zone to prevent it from switching over accidentally. 3) Setup special function for L01 and !L01 to play track ARMED and DISARMED respectively.

[@AlbertKimTV]

😁

[@rwdturbo]

If anybody is having issues with tpro powering on while charging if you set power on delay above 0 seconds should fix it.

[@AlbertKimTV]

😳

[@denisisaev719]

if someone knows how to set up a wheel to power signal level, i would be appreciated to hear it!

[@darzwhoopwhoop]

Hi Albert, I created a double click to arm design which doesn't waste both momentary switches for one function (youtube search it as my last post was blocked for sharing url it seems). If you like it please share, otherwise I will create a new video which is a little more palletable.

[@AlbertKimTV]

Double click to also disarm?

[@darzwhoopwhoop]

@@AlbertKimTV I have created 5 logical switches to create double click arm function. If you youtube search "jumper t pro" it should come up on the first few results (or see my only video) . Apologies for the terrible production quality

[@darzwhoopwhoop]

@@AlbertKimTV yes also to disarm. Double click to toggle

[@karmensarodjo]

Hi, i’m trying to follow your setup but it does not work on my T-PRO. One thing that i noticed, when i push SC or SD, there is no change from thin or bold on the font. Any idea? Is there anything i missed? Or any update firmware? Thanks in advance!

[@AlbertKimTV]

Hmmm, sorry all I can assume is some step was missed or not setup properly. Which one? I would have to see the radio in person to diagnose. Obviously, it works on my radio as demonstrated in the video. Try and create a fresh new model and start over.

[@karmensarodjo]

@@AlbertKimTV OK… maybe because previously I had imported a model from a different radio. Thank you

[@UKkenny]

i have 7 models ..is there a quick and easy way to change them over to this dual button arming method instead of the long winded way like 1 by 1 🤨🤨

[@AlbertKimTV]

I'm not aware of a quick way to modify existing models. This kind of feature doesn't exist yet in OpenTX or EdgeTX.

[@UKkenny]

@@AlbertKimTV thx AK 🙏🏻🙏🏻👍👍

[@brianfreland9065]

You can go to the logical switches page in the menue and make the momentary switches an on/off switch that arent momentary

[@AlbertKimTV]

There's a lot of things you can program but I didn't want to do it that way for safety reasons.

[@johnholland3476]

Will the jumper pro firmware and sd sounds work in a jumper t lite ? I just bought a t lite it arrived today and seller added edge 2.8 somthing and tx wont function cant assign anything or set up .it shows bad sd card contents and only does 10 th or less functions and no sound ,sellers being a butt head off ebay .any advice or help be apppreciazed .its probally v1 i got it to almost setup once now nothing and sticks wont calibrate

[@AlbertKimTV]

Firmware won't work. Sounds might... I'm not sure. You should get the correct files from the EdgeTX companion.

[@gandaulf_fpv6925]

If your knowledge wasn't free i'd owe you like 2 grand😂🤦🏼‍♂

[@AlbertKimTV]

Wow! That's awfully generous! 😂

[@gandaulf_fpv6925]

@@AlbertKimTV Now Now you know you know this stuff in and out. I appreciate your dedication to helping all of us!

[@johnholland3476]

If i tried my jumper t12 sd card and firmware it wouldnt work with my multi protocol jumper t lite would it ?my laptop is toast reason im asking

[@AlbertKimTV]

Would what work? I'm not sure what you're asking here.

[@francohernandez6127]

Nice work but this radio seems not practical, looks that normal tlite is better

[@AlbertKimTV]

There's a lot of things that have improved over the T-Lite but some things are not ideal either. Kinda mixed bag but I kinda like my dual arming switch workaround 😁

[@shellite]

If only the radio had traditional switches, your solution is certainly better than nothing! I wont be buying this radio because I want to be able to flick a convenient switch quickly if I need to disarm, I have no idea why Jumper went down the road of momentary switches

[@AlbertKimTV]

Yeah, it's better than nothing. Otherwise I don't think I can use this radio.

[@felixsrcworld5112]

not soo good for fixed plane or heli or delta wing 🙂

[@AlbertKimTV]

And the reason why?

[@felixsrcworld5112]

no dedicated trim fungtion when fly fixed plane require trimm asap when rc flying

[@pipoypipoy7796]

@@felixsrcworld5112 there are trim buttons beside the green led

[@vuchuong74]

@@felixsrcworld5112 true dat!