I know there is probably a big difference in frame but the 99-06 did the same on my 85 impala and the speed engineering c10 longtubes cleared perfectly.
@vrg69 Жыл бұрын
Cool cars both going to be badass
@Swaps-n-Stuff77 Жыл бұрын
good stuff
@chadgarrett5233 Жыл бұрын
You get the eBay pan check the pickup to pan clearance. I just messed with one a friend bought and it was almost 2" from the bottom of the pan. Only one I've encountered so far but dbl check it to make sure.
@SniderTron3000 Жыл бұрын
Oh damn! Yeah, I'll definitely check
@biggene1711 Жыл бұрын
Sweet 😎
@oldschoolbudgetracing1458 Жыл бұрын
Those motor mounts are the Buick mounts and it looks like they were moved for the Olds motor that was in it. But either way your swap mounts are for a Chevrolet engine location.
@masoncampos7043 Жыл бұрын
I was thinking the same. The transdapt mounts should fit Chevelle frame mounts which the frame should be drilled for already. Having a Pontiac i bought the UMI LS mount kit, cut out all the guess work and those stock rubber mounts. Allows for movement front and back and keeps the engine low for transmission clearance without funky DL angles. I don't think a f body pan will work but the TSP Holley knock off fits perfectly.
@masoncampos7043 Жыл бұрын
Think you should scratch the black. Go flat red and call it the Phoenix! Literally rising from the ashes
@blakebruno1218 Жыл бұрын
Come man, we need a new video.... Hope all is well..
@SniderTron3000 Жыл бұрын
New video will be up tonight actually lol yeah, all is good. Just spending time with my kids while things are kinda slow
@ericbengtson3490 Жыл бұрын
Swaparoonies galore! Thanks for sharing.
@jeremybrisbois1620 Жыл бұрын
Death row for the win💪💪💪💪💪🇺🇸💯
@Black_Ph4ntom Жыл бұрын
We need more S10 cheap thrills content!
@SniderTron3000 Жыл бұрын
I need less snow! Lol it has been like 10 degrees for the last week
@Black_Ph4ntom Жыл бұрын
I feel you! Its been snowing down and Arkansas so the only fun ppl are having here is making snowmen, and doing donuts in parking lots.
@sevenity2677 Жыл бұрын
I have used the flat plate moto mounts that use rubber isolation mounts. And you can use square tubing for frame mounts.
@harrysatin5110 Жыл бұрын
Waited so long for this thought the neighbor got you locked up 😂😂😂
@SniderTron3000 Жыл бұрын
Lol things just kept coming up and I kept putting off editing
@MMCGRACING Жыл бұрын
should you bolt up the trans to find engine loctation ? what trans you runnin ? gonna be sick......
@SniderTron3000 Жыл бұрын
I just ended up ordering the Holley swap mounts to not deal with mathing everything out lol I'm putting the 4l80e in it
@jessewait2931 Жыл бұрын
Awesome! You used my name for it!
@TheBlaqDeval Жыл бұрын
Great work, brother... Wish to see it completed one day
@christophersanders5007 Жыл бұрын
I am surprised a 4L80E trans will not fit easily in a Skylark trans tunnel due to the fact that those where designed to fit a Turbo 400. I guess the LS swap is the cause of that.
@SniderTron3000 Жыл бұрын
Nah, the 4l80e is just a really bulky transmission
@FarmboysRacing57 Жыл бұрын
Yes bop style motor mounts are annoying idk why they made it different from Chevy and gmc
@markbuchanan3694 Жыл бұрын
Because Buicks are better,Chevy cheap junk
@magnumowner Жыл бұрын
What blower bracket is that?
@SniderTron3000 Жыл бұрын
LS Simple
@bluecollarhotrods9781 Жыл бұрын
This video reminds me that I need to make time to work on my Chevelle...
@SniderTron3000 Жыл бұрын
That's what I'm here for lol
@NTromb Жыл бұрын
I love the fact that you’re using corded tools on myself like wicked battery powered tools so I bought a bunch of Milwaukee M 18 stuff and when I’m working on cars or whatever every time the battery runs out so I went back to my corded tools
@bencorder2544 Жыл бұрын
Bring the fiero back 😢
@richardsmith-qy6vl Жыл бұрын
Them old buìck motors were torque monsters I had a friend mile that I played pool with in the pool leaugè he had a GS with a 455 and he ran with my 70 LS6 chevelle and his car was bone stock. Very nice car
@jeromeirving4770 Жыл бұрын
What's crazy, I recently acquired a 72 skylark post car. It's bombed in black and primer as well. It's already mid LS swap but I'm thinking of dropping my 5.3 Lt in it. This build just like your others is gonna be awesome
@jeffgraham48 Жыл бұрын
Buick motor has different location on mounts. Cross member is different or holes are. Fought that battle a couple of times.
@SniderTron3000 Жыл бұрын
Yeah, thats why I ended up just saying F it and got the Holley mounts coming
@chickenray182 Жыл бұрын
That motor looks so much like a 455 Olds. The valve covers were similar, and the gold paint was standard.
@mcfero1 Жыл бұрын
Speed engineering sells headers for these cars but If you got the 1-1/4 forward Holley mounts you just have to tap the front primaries a bit to fit or they hit the crossmember. Nothing like the s10 though.
@redneckbryon Жыл бұрын
You have enough room to put the HVAC Box back in. Ride in style with Heat and AC.
@lloydprickel825 Жыл бұрын
Must be warm in the shop cause it ain't outside it's cold in mine hard to heat up when it's 20 degrees out the new truck looks good when you went by the other day
@SniderTron3000 Жыл бұрын
Lol nah, it was still cold as fuck out there. And thanks, its a pretty decent truck. Makes a shit load of torque lol
@lloydprickel825 Жыл бұрын
@@SniderTron3000 other then the price of diesel now days
@budddove6480 Жыл бұрын
Dude, that set up looking all raw and mix matched in that car screams widow maker.
@slippersgarage4775 Жыл бұрын
Are the stocks 14 or 15 inch wheels? They should be worth a couple hundred bucks
@SniderTron3000 Жыл бұрын
They're 15's. I did think about selling them
@Tinman97301 Жыл бұрын
Algo
@hitmann8420021 Жыл бұрын
Gonna be sick!
@alvaradotowing23 Жыл бұрын
Bro, You gotta paint the LS Buick Red 👍🏼
@SniderTron3000 Жыл бұрын
Man, I was just thinking about that yesterday lol
@markbuchanan3694 Жыл бұрын
Don't disgrace a Buick by putting a Chevy in it,ls doesn't deserve Buick red.
@davidcunningham00 Жыл бұрын
So when you decide to put a turbo on that 1 can I buy the blower. Lol
@SniderTron3000 Жыл бұрын
Lol blower can be bought
@pressinpickle345 Жыл бұрын
Good video
@CravingClassics Жыл бұрын
🤙
@GasCarGarage Жыл бұрын
Thanks for the update. It would have been so sweet if the driver side header would have worked. Glad you decided to Mach up the engine first. Solid floor pans are overrated anyway 🤣😅🤣
@powershift5439 Жыл бұрын
So, idk if you'd be interested or not. But I have a HEALTHY Buick 455 in my 70 skylark. 76 short block with 70 heads, TA212 CAM, Hads have been shaved some, S-divider intake.. motor has Round 10k miles on it. Very reliable engine.. no bs. The Buick was my daily driver until the converter took a shit. BUT! IF you was interested.. I'd be willing to trade you my drivetrain for an LS swap drive train. Runner for runner. Just needs converter. Which if need be I'll take care of before potential trade. You can hear my 455 running on KZbin.. fatmatts garage is my old channel handle. I'm wanting a turbo LS build for my Buick... Would just rather see my 455 go to a good home. And if you had it, I could watch the progress. I would like a th400 trans if possible. If interested, lmk.
@NTromb Жыл бұрын
Definitely will be a sick build. I know what it’s like building on a budget. I just wished I could’ve kept a lot of the stuff around that I had but over the years I’ve just given it away because my garage was getting to Cluttered
@SniderTron3000 Жыл бұрын
Yeah, I do that too from time to time. "Just get it out of my way" lol
@TagGeorge Жыл бұрын
Did you just name the car Death Row 16:48?
@SniderTron3000 Жыл бұрын
The comments on the last video, there was a ton of suggestions saying to call it Death Row. A few for Houdini too lol
@smiller225 Жыл бұрын
What brackets do you plan on using?
@SniderTron3000 Жыл бұрын
I ordered the Holley mounts. Searched for the part numbers on ebay and found everything for half the price lol
@codyhaveman5939 Жыл бұрын
Can't wait!!
@RealBuickpower Жыл бұрын
no no no stop putting chevy in buicks
@herbiederby3394 Жыл бұрын
Looking good, 55 Chevy moment was LMAO,...rock on Josh....🙂👍🙏
@gordonwalker8003 Жыл бұрын
Your not answering my question. On your said motor city . Detroit or Flint Michigan area.. spider current is are in Grand rapids in Michigan. I'm out of Flint Michigan.gord
@sevenity2677 Жыл бұрын
Get whatever products you can when it comes to building cars. Half of motorcycle product aren’t US made.
@erscustoms911 Жыл бұрын
Just paint the door we don’t want to see it run , just one color haha
@SniderTron3000 Жыл бұрын
Lol
@donaldreese2688 Жыл бұрын
Death row fo sho my guy my son said dad that looks like the death o duke from GTA I said wow I was thinking death row bc ya know it fits it so well but I see I wasn't the only one thinking 🤔
@Stevesbe Жыл бұрын
Blowers are for cavemen
@SniderTron3000 Жыл бұрын
Unga bunga
@OldGuy54 Жыл бұрын
They don't fit because it has a Buick in it not a Chevy