JUNKyard engine FAIL! In the shop with Emily EP 45

[@Unobullito]

The look on your face was priceless when you took the plate off and saw the bolts. Loved the video

[@UncleWillie]

I was watching this, when my 7 year old son, Heath, came in from taking apart a scrap car. Yes you read that right, he was in the backyard disassembling an Infiniti i30, Why, because he loves to do it. He walked in the house,"to take a break," and saw your niece working on the engine. He was fascinated by it. He got all excited when he saw the Dewalt impact and said it was just like mine. He has my old Porter Cable. It is great to see you teaching the younger generation about cars.

[@flyingsparksgarage]

Uncle Willie That’s TOO DANG COOL!!!!

[@dennisprocop4166]

Emily you are a one of a kind, not afraid to get some grease on you and you clean up so well! Really enjoy the videos!

[@crbourret]

That look in your face when you found more bolts under that plate was priceless!

[@MrJerryKramer]

We had a 1972 Bronco when we had a Ford/Lincoln/Mercury Dealership. We took it on so many Jeep Tracks growing up with it. Loved it because it would come out of washes so easy while others would drag their back ends and get hung up. Ours had a 302.

[@jayallen7368]

This is so cool you are teaching her about cars this is AWESOME we need more car gals.

[@mikejohnson5837]

Wow. That engine must have really been through the ringer. Bummer. But you should be able to still get a decent runner between the three. Gosh how your niece has grown! She's such a cutie pie! And Finley is looking great! Always enjoy seeing them both. You have some fantastic builds going on and am glad to see a post from y'all. The Power Tour should be awesome!

[@bryanroupe8646]

The explorer 302 was the best 302 made aside from the cam and ignition system. I have one in my mustang and it made 292whp with a few simple mods through a tko.

[@calvinh.8882]

That 302 with stock parts is perfect for the Bronco. I had 69 Bronco that I put a complete factory 5.0 out of 89 Mustang in with a 750 Holly Carb, and it was awesome! Plenty of power.

[@ddcraun]

Such a bummer that the gt40 heads were trash. The E7TE heads from the Fox aren't bad though....not GREAT, but they were the "truck" head that Ford pulled from the parts bin in the 80's for the Mustang to pump up some power after 1986. That Fox short block is a real upgrade from the Exploder block though. TRW forged rods and pistons from the factory and pretty darned tough up to about 450 HP. The 87-88 speed density cam is a little more aggressive than the later MAF cam and with a set of the Crane 1.7 ratio roller rockers will make some solid TQ. Loving it.

[@nickelvan]

You and your niece working together was adorable, she a great little helper. She might be fixing her boyfriends cars for them someday...haha Can’t wait for Garfield project, first video I watched of yours was picking it up in Iowa!

[@Roger21989]

Love your builds! You guys work so well together.

[@alanb2845]

I got lucky with the explorer block I got for 300 bucks. Stroked it to 331, did some bowl work on the heads and cammed it. Makes great power in my fox

[@RSDX99]

I'd like to see some of those 300K Chevys she mentioned. Chevys rust out long befor they reach even 100K

[@BruceBusby]

Nice to see the shop gang with a new video. The world's most adorable couple, shop hand niece and shop manager Finley.

[@pathbelow6652]

What? Don't ditz a Ford. Like anything out there, build it and they will...love it. My hubby has built almost anything. When in doubt..don't. READ about it. We can't stress enough about reading. That 49 buick 8 that we bought and hailed it back to our neck of the woods is turning out great. The entire drive train and susp. brakes ended in the scrap. We just received the engine and trans combo. 572 gm crate and 4l80hd Trans 12 bolt rear Baer brakes, Hotchkis susp waiting to receive. Hubby is building the roll cage. Live 💘 🔧 😃

[@thomaseisen304]

OMG her face ! Priceless ...realy sorry but that was way to hilarious !!! Awesome video btw !!! That was FUN ! THX Emily !!!

[@johnpolzin6694]

I had a main knock in a Ford 4 - cyl. Mercury as a broke teen. Grandpa said; "Take the main cap off, take this piece of shoe leather, soak in oil and stick in there on top of the bearing." I did - THANK YOU grandpa! Ran quietly for years!

[@waynegouin939]

I would at least put new rings and bearings, oil seals, oil pump, timing chain+ gear set, cam+ lifters. If you got the heads and pan off, go for it. revved up yooper

[@pkuudsk9927]

You can buy a cheap bore scope for under 30 buck's that hooks up to you phone's camera. Great for checking out used motors saved me a few times . Also good for finding droped nut's /tools.

[@Mytyweav]

Emily... Nice job.... Love the stuff you guys are doing. Looking forward to the Garfield project.... the 350 bolt on stuff along with that gorgeous new instrument panel. Love watching you rip into those engines! Have fun and Good Luck! Weav

[@79tazman]

LOVE IT!!! Can't wait for more input LOL!!

[@rixkafer56]

Stellar editing ! thanks for sharing

[@charlesnorris2993]

suggestion.. use a RV cam lil bigger then stock.. for more low end trq.. just a thought

[@timruiter5460]

GT40P heads take a different exhaust manifolds due to different spark plug angles.

[@larrykirby5036]

I LOVE that you are showing your daughter how to work on mechanicals. Hell I'm having trouble getting a simple belt on my riding mower while you and your 7 year old daughter are rocking a V8 motor like a boss. 👍

[@flyingsparksgarage]

Larry Kirby She’s the coolest!! She’s our niece, lives right next door ♥️

[@wyattoneable]

Always a pleasure to stop by.

[@josephknox1265]

Your niece seems to age a year between each episode. Soon she'll have her own show, building go carts and motorcycles.

[@rvburbank1]

Did she just write the new jingle for PB Blaster?

[@flyingsparksgarage]

rvburbank1 APPARENTLY!!!! Complete with choreography!! 😂😂😂 I freakin died laughing while editing!!

[@joshuavetting4148]

I'm kinda surprised no one mentioned anything about the lack of safety glasses on the little one. Give her some glasses and let her hang out in the shop more. It was great seeing her again.

[@flyingsparksgarage]

Joshua Vetting I did miss that, gotta get better about that!

[@joshuavetting4148]

@@flyingsparksgarage maybe get her some cool safety glasses with pink sparkly flames or something she would be proud to wear.

[@TheCanadianBubba]

Lots going on for you all ! Great days to ya !

[@ViceGripGarage]

Back again! Excited for boop to be finished!! Intro is better with🎶🎵😂

[@flyingsparksgarage]

Vice Grip Garage Thanks fam!!! See y’all SOOOON!!! HEY EVERYONE, SUBSCRIBE to Vice Grip Garage!!!

[@serranasuarez1152]

buen trabajo me gusta cuando trabajan los 3 exelente.

[@jamesdodd8731]

Emily...LOL @3:11. The engine designers just do that kind of stuff to mess with us!

[@anomamos9095]

The top plenum on the intake manifold, can it be flipped around so the throttle body is facing the other side?

[@brendonchase9460]

Love this couple. Get it

[@JB-ou4fu]

Emily, as much as I enjoy learning about mechanical work, I find I'm actually more interested in looking at you. You're very pretty, and if that's your hubby, he's done well. Congrats to both of you!!!!!!!

[@johnanders3873]

thank you ,,, columbia tn.

[@xozindustries7451]

Can't wait to see some videos start rolling out!

[@donaldk.macbaird4950]

Finally I get an Emily Fix love your vid's

[@slamnmerc]

Awesome video, thanks for sharing!

[@cutemike39]

Love ur laugh. Emily.

[@victorjacobson4635]

i lol'd with you fighting that 5.0 intake off. welcome to working on fords

[@MrGaryGG48]

Emily, you are so much fun to watch... When that cover came off and you found those "sneaky" little bolts underneath, I'm almost certain I could hear you talking to it. Your mouth never moved but your eyes are sooooo expressive!!!! ;^)

[@Wanous-hv7zo]

victor Jacobson fords dumb ideas

[@cfuller926]

know ya know how we feel, young lady, when under a car, gettin dripped on, tryin to remove sompin we never seen B4. I use nother job ta clear my head. No hubby to come home'n C lacka progress. Presto, the middle of some routine (break or other) job the idea hits: "I wonder if that plate...?" Keep upda good wrk. Had my bronk since '83 (a 70/77 mash up since '85). I'm in till the end...

[@greatnortherntroll6841]

Whoa! Was that an actual, running, O.E. Chevy LUV @1:20 ?!!?!? 😁 Those things were all but fossilized by the time I retired back in 07!

[@stevecounts325]

Lonnie Moore It’s diesel powered,but yeah, I thought they were extinct,too.

[@flyingsparksgarage]

It’s a diesel luv! We swapped the original motor for a 4FB1 I Mark out of a Chevette!

[@arnoldhillbillygrizzlyputm1493]

There's still a few getting about here in australia where roxy came from . Theres even a fb buy sell an swap page here for them . Nice ute's but too small inside for me :-( , isuzu ute panels were same as these too .

[@frankiem749]

The way she said PB Blaster sounds like a pastry snack instead of rust penetrator, now I'm craving peanut butter with Nutella haha.

[@rejeanrobichaud]

Thanks Emily for the video . Reg .

[@marcss73]

i cant wait i love to hear you talk tyu so much for a great video. & Remember to be were your feet are.

[@powerhouse_customs_ar4889]

You doing the v belt or serpentine belt?

[@chrismaplethorpe6781]

Good to see your niece showing an interest and getting her hands dirty.

[@whatchu_talkin_john_willis]

if you want to prevent coolant spills with a removed engine, pull the block drains

[@jeremyhanna3852]

Suck all the coolant out with a shop vac

[@pathbelow6652]

Aluminum intake and E Z EFI oh yeah. Its amazing how this combo cures so many problems. Heh heh.

[@w41duvernay]

Don't fell bad about getting tricked on the bolts in that ford 5.0l intake. Being a GM oriented person, we once got an earlier 5.0L engine in the shop. I noticed that engine had a set of aftermarket roller rockers and decided to grab them, and sell them on ebay. It took me a while to figure out that the bolts were under the plate on the top half of the intake.

[@txnetcop]

Great video you guys!

[@upsidedowndog1256]

The '86 Bronco my parents had with a 302 made gobs of torque from idle and screamed to 6000rpm stock.

[@jlletaw1954]

I think l want my $400 back or another motor (it better be good) - but that's just me

[@wesleycook6921]

The gt-40 heads are not that great. Intake valve is a small1.94 exhaust is 1.54. Intake runner175 cc. You can do better. Trick flow makes a great top end kit Not an arm and leg

[@whatchu_talkin_john_willis]

anything from trickflow is at least an arm lol

[@ahuggins6]

@@whatchu_talkin_john_willis I had to give two front teeth just for looking at their website!!

[@ddd228]

They will be fine for a torque engine.

[@whatchu_talkin_john_willis]

@@ddd228 lol no, better heads will make more torque and horsepower everywhere. ANY factory windsor head is a turd, the gt40s are just the shiniest

[@alanb2845]

Gt40s are probably the best factory cast iron sbf heads. Do some bowl work to them and they’re good to go. Hot Rod magazine was able to coax 375hp out of a gt40p 302 with bowl work and a big cam

[@firemedicseven]

I hate I am missing Power Tour this year. It is always a blast.

[@raywalz4952]

Maybe some eye and ear protection with power tools?

[@halenashley5478]

You are so awesome!!!😎👩🏼‍🔧👩🏼‍🏭

[@terrycarter8929]

The pistons in those engines are junk. The heads are GT40P heads and the spark plugs are at a different angle causing exhaust manifold/header clearance issues. The pistons in the Mustang engine could be forged if you picked the right year.

[@BADAZZ93STANG]

Awesome video y'all!!!!!

[@Mullay2]

I know this is a low bucks build but junkyard engines are always a crapshoot. But where in the world did you find that diesel Chevy LUV?

[@karlpokorny7130]

There is a vidio about it

[@flyingsparksgarage]

We diesel swapped it 😊

[@Mullay2]

@@flyingsparksgarage Nice!!!!!!! What engine did you use?

[@theman68and1]

100k on a Ford is like 1k on a chevy

[@MrHevyshevy]

Fords are ok sometimes. If they are old.

[@jeffsanderson1314]

A heads up, for your assistant. Safety glasses to protect the eyes, as she was at eye level when spraying the PB blaster.

[@Skitter302]

Crap OSHA walked into the room.

[@johnbernier2917]

THOSE 302 WERE THE BEST MOTOR FORD EVER MADE I HAD 1 IN A150 PAID 250 DOLLARS FOR THE TRUCK DROVE IT 3 YEARS WITH A KNOCKING CRANK OVER 60 MILLES AN HOUR IT SOUNDED LIKE DIESEL AND THEN IT STARTED TO BURN OIL

[@roycooper7461]

great video teaching the next gen

[@dalebelseth3058]

So Respect you

[@michaelbenoit248]

Screw the 5.0 put a 5.3 vortec in it. Way better motor, plenty of power, and it’s still being used today. There’s a reason why they still use it. And one more thing, airbags are optional.

[@lynnbevins7100]

Nice work

[@PrairieValleyProjects]

Nice video 👏🏻👏🏻👏🏻👏🏻👏🏻😀😀😀😀😀

[@slagman163]

Love your videos guys, keep up the great work! Can I live through you?...lol

[@MrNosajwhitey]

It feels cruel of me to say that I enjoyed seeing you actually show less than perfect junkyard finds as they happen to us peeps too

[@chloehennessey6813]

I think I love you. I love your projects and cars. But that music at the beginning gave me aids Mama. And I’ve done that SAME thing on a Ford intake!! My uncle John came in and was like they’re under that piece. And I finally had enough saved up for the 1/4” Milwaukee impact gun in 12v and the 18v Red Lithium 3/8 impact. I’ve been saving for like 3 months. Because the one they sent me was too big for like regular work? I guess. Like the 1/2” impact is a beast tho.

[@flyingsparksgarage]

Chloe Hennessy Haha! Thanks Chloe!! Annnnd how did I screw the music up?! Lol!!! We have a 1/2 inch Milwaukee that kicks ass!!

[@chloehennessey6813]

Flying Sparks Garage I think it’s called dubstep. Issokay tho cause it started to be popular around the time I was 5 or 6

[@Skitter302]

@10:40 I'v tryed collecting 302s but now I've got 3 460s. whoops

[@michaelbenoit248]

Skitter302, they are pretty good engines though.

[@stellingbanjodude]

First thing i would have done is spin that crappy fram filter off, it probably caused the sludge

[@bray56mj]

There the problem with all that engine sludge it's that Fram filter you took off.

[@AdamRich1785]

Your niece is adorable!

[@stellingbanjodude]

Was that a diesel luv?

[@flyingsparksgarage]

stellingbanjodude Teo! I Mark diesel out of a chevette!

[@ranchrods1]

learning is fun!!!! proud of you ;)

[@mattsez2879]

Did you know if you forget the washer under the balancer bolt....,you totally TRASH your puller and it never moves?.......true story, i dont want to talk about it

[@nothsim]

Time to get the niece a go kart. Go kart build series. Lol

[@dontask8979]

Why would you pull off the fuel injection? Nothing better offroad. Iv been driving a fuel injected 5.0, BroncoII since 97. (uploaded)

[@Pure_KodiakWILD_Power]

that was some jerry seinfeld caliber aggression 🤣🤣🤣

[@redhwk44]

100k on a ford...LOL that made me laugh. Also made think of all the ford lovers at the car shows that have a chevy motor in them. The best thing about those fords is the chevy under the hood.

[@hudsonhawk0016]

Every Ford hotrod I've ever seen had a small block Chevy in them. If they had a big block, it was a 454 not a 460 Ford truck motor. Lol

[@richardtruesdell8289]

why not do a compression test

[@montefiveforty1]

What happened to the LLW show?

[@flyingsparksgarage]

montefiveforty1 The network still has it in their lineup for potential 2020 shows, it isn’t canceled yet 😂

[@w41duvernay]

Don't feel bad about removing the Ford 5.0 intake. As a GM person, that got me once...

[@mcdonalbennett6805]

Looks like somebody didnt change their oil

[@ahuggins6]

2:56: OORRRR TWO underneath!

[@wildhorses4x4]

Holy crap! You weren't lying about engine drama hahaha that's too bad. Still seems like you guys are having fun though! No wrenches through the windows yet ;)

[@flyingsparksgarage]

Wild Horses Bronco TV It’s been a mess over here y’all!!! 😂😂😂😂

[@jessereed550]

5,3. Bronco

[@jaredanthony8070]

It was good the first time but man music does make a heck of a difference lol also I love Aaron's remark about the 100k on a Ford is like 300k on a chevy 😂

[@alankulchecki3160]

explain that comment please

[@jaredanthony8070]

@@alankulchecki3160 well it's a 2 parter.. the first being that the first time it was uploaded it was missing music... the second meaning that a Ford at 100,000 miles is as worn out as a chevy at 300,000 miles

[@waynegouin939]

Im pretty sure he meant to say 100,000 miles on a ford, its just broke in. But it is junk so it probably had way more or it was abused. Probably both! Oil looked pretty black. I been wrenching for 40+ years and i always have better luck with Fords.

[@estpst]

bolt, bolt, whose got the bolt!

[@jord9308]

I still have those red Simpson harnesses for Betty Boop if you want them

[@duccanard9079]

Using your chebby math,my 69 FE has 2 million miles on it.No wonder I had to put on a timing chain and fresh freeze plugs.

[@MRLUGNUTS]

Hello!! my two favorite girls and Aaron... hey! Aaron i carry the same stream light.

[@GUNKOfficial]

@MotorTrend please renew Live, Love, Wrench!

[@flyingsparksgarage]

GUNK Official Haha!! Thanks y’all!! That’s the hope! It’s in the mix of 2020 shows, just has to be ordered to the production company! 🤞🏼🤞🏼🤞🏼 Appreciate the support!

[@GUNKOfficial]

@@flyingsparksgarage We'll drop some hints to anyone that'll listen if we run into anyone at AAPEX this year...lol. Keep up the good work!

[@waterzonegt9179]

I think we can all agree he is one lucky bastard LOL