Early Bronco Holley Sniper EFI continued!

[@lastmanstanding2622]

7:40...I've never been so envious of a fender before. 😊

[@victoroneill7924]

I really enjoy watching your KZbin channel and have learned a lot from you two. I was an electronic technician/electrician for many years so I did a lot of wiring. One of the most important things about is making good connections and especially good ground connections is to use conductive grease. We always sanded down to bare metal and applied conductive grease to the surfaces before we made the connections. When we made a connection with aluminum we sanded the surface, applied conductive grease and then wire brushed the aluminum before we made the connection because when you sand aluminum it oxidizes immediately. You will probably have to go to an electrical supply to buy conductive grease. Most auto parts stores will sell you a tube of Dielectric grease and Dielectric means "non-conductive" and it's great for things like spark plug boots or sealing electric connectors. I guarantee that somebody is going to reply "They've been using Delectric grease all their lives for electrical connections and never had a problem." If I had been caught with a tube of Dielectric grease on the job I would have fired on the spot.

[@flyingsparksgarage]

Never knew that!!

[@juliamayes8004]

Great sense of humor.

[@peerplaut]

I love the connectors. I've been bit my hard-wiring things. I found on Amazon waterproof connectors like they use in new cars.

[@MorphAndCats]

Just saying… (5:09) I would have put different connections on the orange and red wires out of the distributor, because if you’re doing a road side repair. The orange and red wires look the same in the dark. (And under street lighting.)Maybe a female and a male connector, so you cannot get it wrong. Great job, Thanks Morph x

[@stymiesnerdly771]

Shout out to Al Unser Sr.! I'm from Indiana and feel like I grew up at "the track". Love the Unser family, from Al, Uncle Bobby, and Little Al as well.

[@theodoredugranrut8201]

Always fun when we can visit . No church bells would be lovely with the rest of your sound track. Thanks friends Central California watching

[@65Coasty]

Nice job Emily. We appreciate the time and work taken to get these episodes out. Great job.

[@timglass6041]

Emily, You are just simply Awesome, you bring me knowledge, workmanship , humor, and a beautiful smile every time I watch your videos. I'm really enjoying this Bronco build. Super Cool. Already looking forward to the next episode. btw, love your Bronco T-shirt, looks good on you.

[@mkllove]

Hey Emily, since you're using those great crimpers and heat shrink, you can actually clean things up a bit, and buy just the bulk connectors without the plastic sleeves on them... in addition, you can get the heat shrink in colors for denoting the wires function in system. They'll be smaller and cleaner at each termination without the pvc , and if you're in a hostile environment like a race engine or boat; crimping just the terminal is best followed with some solder before heat shrinking to finish. The solder makes it corrosion resistant and durable while improving conductivity.

[@stevethuss2707]

UR WAY IS THE BEST WAY TO LEARN.

[@Wardaddy1124]

Great video love the show you guys keep up the good work

[@pentastarpride]

Aagh man you gave away a little secret... a small piece of heat shrink at the connector to identify the color that the insulation could be.... bravo!

[@chrisschaub3389]

Finley is the technical advisor!!! LMBO

[@ryanintopeka]

Emily I appreciate your humor. When I act like that people generally don't find it as funny. Maybe it's cause I'm not a charming lady. lmao... I love that bronco though. Probably my favorite of your projects. I've always dreamed of owning an old Bronco.

[@70sstreetracergal61]

Noise From Ryan's Basement Had a chance to buy one in the late 70’s and regretting not going for it now. Love your Tshirt Ems!!! Hey Aaron and hugs to Finley! ❤️👍🏻❤️. His haircut is cute!

[@gmc1284]

Why it's Ford junk.

[@chappy5538]

Hang in there your getting closer. Finley is good help

[@mohamedhosh3003]

Great video ! Keep up the great work ❤

[@Jamesoxendine1]

Doing great guys! Come on Betty Boop!

[@sthaack]

You should get yourself a pair of the Klein Tools Katapult wire strippers (or other comparable brand). They make stripping those wires down effortless. Love the channel keep the content coming!

[@Texastigerdigsdetects]

Oh what a nightmare. Your work is neat and great. Wiring is my nightmare even though all my bad dreams are my lack of skill it still hurts. I really enjoy you guys and your niece when she appears.

[@AntonioClaudioMichael]

Wiring is always fun and its coming along great good video and good Job Emily and Aaron @Flying Sparks Garage

[@mikemullay5622]

My home town of Bremerton, Washington has carillon bells in the tower of a downtown bank building that used to play every day at noon. I haven't been in town for years so I don't know if they still play or not.

[@joel4491]

To gage the length of the wire use a piece of string to determine the length always works for me

[@bradkunis5737]

Just a little piece of mind that I like to do is solder my connections. Cuts down on possible corrosion down the road. Especially if you fo a lot of off-roading.

[@BadLogan426]

Keep up the good work,things allways go SNAFU on a projekt and thats real life.

[@Stahodad]

Put a bit of hot melt glue inside the heat shrink tubing (before you shrink it).. for a cheap more water proof seal...😉

[@GooeyThaGamer]

Here in South Texas the Courthouse has a bell and plays certain “songs” depending on the time, heard them so many times growing up I just know them by memory now 👍🏻

[@alanhughes7623]

Wiring is great fun 😁

[@Mr2greys]

GAH the Cisco default song! It is burned into my brain from every place that never changes their hold song. The other song is Another Happy Day by Craig Riley which is catchy at least, Air Canada has it as their hold music and I had to listen to it mid March spending 6 hours on hold over 3 days trying to cancel flight to Chicago from Ottawa in April as everything started shutting down due to Covid.

[@shanewright6958]

It's looking good. Another great job and video 👍👍🇨🇱

[@ODGColornChrome]

When you have two wires going to the same points, and you are putting connects in, make one a male and one a female,like at your distributor, so they don't get mixed up lster if you unhook them.

[@kgooch69]

The Catholic Church in my small town has bells playing daily at noon...but come to think of it I don't think I've heard them in a while... either that or I'm just really used to it and don't notice anymore 🤔. When I was a kid the air raid siren used to go off every night at 9 o'clock...we had a curfew in those days... doesn't go off every day anymore but you hear it every now and again... just testing it I guess it doubles as a warning system also ( we are in a flood prone area).

[@cheif10thumbs]

Finley. The Standard in Cute Shop Dog!

[@tekvax01]

Shop dawg approves of all da wirez too!

[@flyslow2096]

That "new song" on hold is the Exact same music on Jeppesen Sanderson Aviation Chart service hold music! Haha.

[@1geniusl]

And the IRS practitioner hotline. 🙄

[@srtabc123]

City of Dallas hold music too. Must mean it’s free. Lol.

[@rixkafer56]

wiring ! the tedious part of hot rodding for sure ! but very satisfactory when it all works out... finleys too cute... I spent some time in Italy and had a second floor apt near the Duomo (or large church) in Florence every morning at 7am BONG BONG BONG... lol I got used to it

[@ffmed6495]

Nice video I would attempt to use similar color extension wires if possible I know then you end up with a ton of different color wires laying around but it makes for easier maintenance later, the different color ends work ok but will discolor. Still nice job!

[@timwickersham869]

Hell yes from indy ,,,on the TS....love this channel,,,...😷🤘🇺🇲

[@brianwaskow5910]

We get church bell music in Valders, Wi they play at noon and 6 pm

[@malachistowe3071]

Hi guys!!! So our town of 168k has at least 3 colleges that do and if I remember 4 or 5 older churches that still do...

[@WTFShelley]

less the a minute in, doggo, well played

[@zanehokanson1318]

bells in woodland wa. the same song I herd in kindergarden in 1968

[@rogersattler4423]

Plan a wiring run? Use different colored wires? Use proper connectors and crimpers? Hmmm, this might make a difference! have to try it next time. ...Loved the episode!

[@AntonioClaudioMichael]

Got 35 churches in my small 1 mile town you hear the bells all the time @Flying Sparks Garage

[@JohnsJunk]

Tool Aid 19000 Automatic wire stripper. Life saver when you're terminating a lot of wires.

[@captainsv8log525]

The terminator efi and msd cd box was a head scratcher but 4 years later i have yet to wire the fans and fuel pump

[@mr.the-edmeister2750]

Better when Holley EFI is installed on a much newer vehicle and the installer doesn't need to deal with a distributor and a single coil, and lets the system "do its thang". Loss of the spark knock sensor puts the installer on the low side of performance or risk potential engine destroying detonation by pushing spark advance too high. For Emily and Aaron it won't affect then performance wise, ......

[@70sstreetracergal61]

Have Church Bells ring every hour on the hour 😁 Tiny Missoura town👍🏻❤️ Hugs to Aaron and Finley and you as always Emily! ❤️. Oh huney. The list NEVER ENDS! ❤️ Hope you can keep your muscle cars as long as I have! Soooo worth it!!!! But such a picky broad my old ride is. 🤣

[@danmay9728]

Love all your videos, but like the ones on Garfield the best, my kind of truck. The best to you and yours where is your neice miss her in rhe videos. Be safe. Peace 🇺🇸

[@PeachCoastLowrider]

Any complaints with the Holley EFI?

[@Buses2Bikes]

In my seaside town growing up we had a local firehouse/paramedics station left over from WWII and it had an air-raid siren mounted on the roof. Every Sunday morning from March until September it would wake up the entire town on Sunday morning at 6:00 AM. I left there decades ago but I did a google maps street view search of my old town one day and it looks like they tore that old brick building down and put up a stupid Hookah/Head Shop.

[@mr.the-edmeister2750]

CD siren is still used here, but on Tuesday mornings @ 10am; 2 blocks from my house.

[@johnharlan7205]

Doesn’t your distributor have centrifugal advance built into it? I see it has a vacuum advance. Most aftermarket distributors you can adjust between a couple different degrees of advance and put different springs on it to adjust how quickly the advance comes on.

[@brianlojeck]

how much time do you spend preparing each T-shirt for the video, and do any of them survive washing to wear a 2nd time? :-)

[@flyingsparksgarage]

Depends on how much detail I add to the shirt! Some take me 5 mins- some 15! And t-shirt material doesn’t fray in the wash so my modded shirts last the same as unmodded! 🥰

[@brianlojeck]

@@flyingsparksgarage I prefer the "buy the biggest size and hope I don't look like a stuffed sausage" technique. :-)

[@rickriccardi9643]

Maybe I just haven't noticed, but are you using a new HD camera?

[@flyingsparksgarage]

Nope, same ol Lumix G7!

[@dielauwen]

Wiring is easy.

[@01FozzyS]

Lol, Finley says that's HIS table no matter what.

[@steveanderson5888]

Where I live in the state of Washington it's called Bonney Lake Washington no church bells sorry that accustomed to it

[@matthewzoelle9149]

Is that the total wire crimper? If so I have the same one. I use it daily at work.

[@neilperry2224]

For a small town with loads and I mean loads, the local government used to do the hours, but after restoration of the bell tower, NO MORE BELLS!!! :(

[@chrismartin6544]

Let’s go !!!!!

[@dennisc.1189]

No Emily, we don't have church bells, here in Oklahoma City only on Saturday at noon we have a tornado siren that goes off for testing the sirens.

[@jimclarke1108]

Red on the + Black on the - of the battery, anymore problems let me know ))

[@desotokid99]

Emily you have mentioned you have done magazine modeling could you tell me where I could find your pictures

[@markbremmer8642]

JC Penny & Dillards are two that I heard her say in previous videos.

[@flyingsparksgarage]

Saul Kaplan Hi Saul 🤓 Here’s a link for my portfolio on my main agency... www.kimdawsonagency.com/kimdawson_talent/emily-williams/ the other way you can see some of my work is to follow me on social media @imemilyreeves on IG, Emily Williams Reeves on FB. I post modeling pics sometimes 🥰

[@a.j.summers9986]

Just finished this on a SBC 350 in a YJ..... amazing except it back fires and sputters everytime I try and accelerate!!!! It fires and idles perfect, just hates being under load? What the hell?!!

[@flyingsparksgarage]

Hmmmm!!!! Fuel starvation? Heck! I’d call Holley tech and ask!!!

[@mr.the-edmeister2750]

"real" small block? (350 should be assumed as "real" SB) or a more modern LS which is considered a "small block" by some? For real SBC - are #5 and #7 cylinder plug wires 'neatly' bundled parallel to each other? 1.8.4.3.6 -5 - 7 .2 - firing order -- 5 & 7 fire one after another and should cross over each other to stop induction due to parallel plug wires and thus #7 firing to soon, and resulting in pre-ignition while the #7 piston is still coming up on it's own compression stroke. Ford small blocks were prone to do the same thing back in the '60's when someone "tidied up" the spark plugs wired to run parallel in the factory plug wire holders on the valve cover; can't recite the cyl #'s anymore, because Ford 1-4 cyl #s ran up pass side and then the 5-8 #s on the drivers side; where GM had even number cyls on the pass side and the odd numbers on the left side.

[@victoroneill7924]

What kind of creeper are you using? I like it and need a new one.

[@flyingsparksgarage]

Ummmm it’s a foldable one we got at AutoZone!

[@victoroneill7924]

@@flyingsparksgarage Thanks!

[@cgulden]

We have bells

[@chuckgallup9746]

Our local fire departments do a single siren blare for noon time.

[@slagman163]

Emily, I could watch you two all day long! Love the content and you are so dang cute ❤️

[@chrisschaub3389]

Quorenteen was made your hair more curly!!! LOL

[@flyingsparksgarage]

it actually HAS! Not having it straightened by hair stylist every other day has absolutely made my hair curlier!! 🤣🤣😝

[@miguelmena2264]

This bronco need to go holy Ford fest

[@WTFShelley]

thats the same tune the IT department at my job...... and im in england, weird

[@edvanrossum5146]

I think you need big mud flaps with a picture of Betty Boop on the back off the Broncko.

[@haroldwoods861]

what size is your shop?

[@flyingsparksgarage]

30x40!

[@patklinger9894]

slow but steady... what happens in real life

[@somanycars]

Next time y'all are wiring a car let me know! I'm up in McKinney and build motorsport harnesses on the side. I'd happy shoot down and give you guys a hand.

[@flyingsparksgarage]

Thanks!!

[@RebeldryversGarage]

You have those uber super duper wire crimpers and still using those ancient wire strippers? Girl, you need to have a talk with Aaron. I use a small butane torch for heat shrink. It fits into the tool box and doesn't need 110 outlet like that hair dryer.

[@neilperry2224]

How old is Findlay?

[@flyingsparksgarage]

He’s 8 🥰

[@neilperry2224]

He looks good for 8, one of my late is 20 y.o this oct.!!!!!!

[@AntonioClaudioMichael]

Best connections on wiring would be soldering and heat shrink But sometimes you have no choice but need crimp on connectors @Flying Sparks Garage

[@tomkrause62]

Good Lord, the wife calling tech with the husband in the background is one of the fastest ways to cause the tech guy to stab himself in the eye with a pencil.

[@markbremmer8642]

Only if the wife isn't Emily!!🤣🤣🤣🤣😉

[@ddd228]

You may recycle COPPER wire.

[@pauldolman]

hi arron/emily gteat video as usual, would you mind sorting out a link or part number for the wire strippers/crimpers you use i'd be very gratefull there seems to be a few very simular on wirecare site, many thanks

[@sixt9stang]

I couldn't find it either and Emily helped out. Here ya go: www.wirecare.com/interest/as-seen-on/as-seen-on-finnegan-s-garage/products-used-by-influencers/ht-shop-k-hillsdale-terminal-shop-kit Edit: figure I should add that this is under Shop by Interest and then As seen on TV

[@evloftis4143]

do what i do when it comes to wiring hire some 1 to do it

[@cpzahler]

The "Tech Guy" was incorrect. You can use that magnetic pickup distributor to control timing with the MSD ignition box. You just have to replace the rotor cap with Holley P/N 84211 and here are the instructions online here: documents.holley.com/199r11031r.pdf and there is a video on how to install the distributor here: kzbin.info/www/bejne/pXO2mqybnJmLebc

[@cpzahler]

You have a Ford so it would be P/N 8433 and not P/N 84211 because that is for a GM vehicle. If your not using the CD box you would wire in their coil driver to the square style coil. It's all explained on that KZbin video.

[@longtalltexan9908]

Not last!!!! Lol

[@Torsee]

10:55 ASMR. Holy cow!

[@dmenke]

Our volunteer fire department siren sounds a noon...

[@jayc2754]

I don't hear church bells. I do hear circus music possible due to working in service 🤔

[@TheCanadianBubba]

Even the Bronco on Emily's top has the wheel wells cut... sad to see all the beautiful quarters on the trucks defiled. #bodyliftforthewin #stopthehacking

[@tsaints1115]

Tip for labeling wires. I have found that you can write on shrink tube with a Sharpie (I've never tried it in pen but it may work) BEFORE you place it over the wires and when you heat it the writing will shrink along with it. The protective loom is great. In watching you try to work the wires in by hand I wanted to let you know about these inexpensive tools that make it much easier. smile.amazon.com/gp/product/B005DTKNZU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 IF you run into RFI ,running your sensor wires through this braided copper loom will help. I did it as I installed the wiring. smile.amazon.com/gp/product/B00M8L2SBS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@mr.the-edmeister2750]

Ball point ink is no good, takes to long to dry is it ever does dry. Gel ink does work better, but easily smears. Sharpy is better, but the best choice is this: www.amazon.com/BROTHER-MOBILE-HSE231-PRINTABLE-HEATSHRINK/dp/B00GO7O9PU/ref=sr_1_2?dchild=1&keywords=Brother+labels+for+wires&qid=1592975710&s=industrial&sr=1-2 Printable Heatshrink Tube Media - expense but I have used it for electronics / computer devices that I have built. Would work as well for cars.

[@edward-x3s6f]

Congratz you guys make a Fablulous Team, if you all get a chance this 62 yr ole male is working on a 440 mopar out of a motor home ...hold on to your hats..😰

[@vernm6189]

the guy says Holley Tech but no name WTF you didn't ask who you were talking to, if you needed to call back you will not no who to ask for next time. There is always a on going List to a Hot Rod of any Kind lol

[@GearlessChris]

First!

[@barryhopesgthope686]

I see you have Betty on your T-shirt. I think the colors are wrong. The yellow should be for Garfield and a red for for Betty.

[@barryhopesgthope686]

I just heard a Paul Simon song, it reminded me of your Bronco. Here is the chorus. " I can be your bodyguard and you can be my long lost pal. I can call you Betty and you can call me Al."

[@tsmartin]

In the future you may want to consider using weather pack connectors instead of the individual ones. It will give you a more professional appearance as well as better performance. www.weatherpack.com/

[@darrelstoneburner6182]

All this work your doing so when you going to take her out for a test drive

[@dwaynemiller68]

You just keep doing what you're doing if it runs which it will very fast you're good there is nothing difference between male and female always have faith in yourself and never forget that we are significant so I'm going to put that in my pipe and I'm going to smoke it

[@foxbodygarageamerica9382]

Disconnect battery

[@hiltonfulp6293]

Ok.... I gotta say sumthin bout the “painted “ battery clamp.... painted electrical connections is a big no no. Every store that has them on their shelves should remove them immediately. My 40 yrs experience and the fact that my father’s electronics background dictates this.

[@dwaynelejeune3508]

Rolling around on a keeper when you have a lift? Really lol lol lol

[@mr.the-edmeister2750]

A lot easier that up and down every few minutes when you're doing a job like that. I actually prefer jack stands for jobs like that, and use the lifts for undercar jobs that go up once and then down when the job is close to being complete. And use a step ladder for quick access for the stuff that "someone" forgot to do before raising the car ....

[@Taverius]

Church bells all over all the time here in Italy, as a godless atheist it's honestly pretty f. annoying, I only notice them when I'm trying to nap 🤣

[@flyingsparksgarage]

creidiki Godless or not, you don’t like music?! Lol!!!

[@Taverius]

@@flyingsparksgarage no music here, just bells ringing. Well, these days it's recordings of bells ringing :(

[@upsidedowndog1256]

I would not want a computer timing my small block Ford engine. Total timing should be a few degrees past 40. 43 is about perfect. Initial timing is almost irrelevant as long as it starts OK. The lightest flyweights in the distributor are the best, usually. I would love to have Aaron's Z car but only with its original 6 cylinder engine.