Jura ENA 9 Disassemble

[@nabilfreeman]

Thank you so much for making this!!! Last time I disassembled 6 months ago I couldn’t find a full guide 👏

[@coffeetechph]

Hi, im editing a video how to assemble this ena 9. Hope i can upload by next week.

[@robertwest678]

Thanks so much fantastic break down

[@coffeetricksandtips1018]

So perfect and usefull 👌🏼

[@donbrunnett5427]

Thank you so much for the very informative video on my Jura ENA 9. I have a jammed grinder motor (I am assuming it should rotate once the outer burr is removed but it won't rotate at all). I wonder which steps are required to remove the motor assembly. I have already removed the sides and top. Thank you so much for any assistance/advice.

[@Progenitura]

I'm wondering if there is a way to remove only the pre-grounded coffee pipe without having to take out everything. In the video it seems it's one of the few things that didn't come off. That thing is a mess. So much mold and dirt. I need to clean that thoroughly. Also, maybe the funnel attached to the grinder? I see that it's basically made of two pieces. One came off in the video, but the other one seem stuck to the grinder and you only took it off after the grinder came off. Can that be removed without taking out the entire grinder? Thank you!

[@nabilfreeman]

Btw, to other owners watching, once you have removed the sides and top parts it is possible to remove both the grinder and the brew unit without touching the electrics. I just needed to disconnect the pump’s water tube and you can tilt the grinder out slightly to pull all the bits out

[@robert1340]

You forgot to turn on your mic.

[@gtg242v]

Which screw driver should be used to loosen the round head screw in the front and back?

[@coffeetechph]

It's called oval bit.

[@carlosalbertoalonsobarrien771]

Que desarmado ocupas para quitar los tornillos de la tapa que venia escondido

[@Nealf2002]

Hi I tried to follow and removed my Ena 9 Brew group and now cannot remember the correct position to put it back in. I put in back and while rewinding after the power is on, it get stuck near the top of the spooling shaft. Any help appreciated, thanks

[@coffeetechph]

Watch this video and jump at 23:00 so you can see how ready position looks like. kzbin.info/www/bejne/rYO4gGycfq6Uhtk

[@Nealf2002]

@@coffeetechph hi it’s grinding and jamming when at the top of the spool. Do you give technical advice? I would love to chat or email offline. Thanks!

[@coffeetechph]

@@Nealf2002 kindly message us on our fb page. facebook.com/Coffeetech.ph/

[@ceesbrooms4176]

It is a pitty you don’t have sound