JUST TRANSFORM IT!: MPM-6 Masterpiece Movie Ironhide

WATCH THE FULL REVIEW HERE! - • MPM-6 Masterpiece Movi...
JTI Playlist - • Just Transform It!
Get Transformers here! - www.bigbadtoystore.com/?...
Check out EmGames - / emgames316
Check out LoriPlan - / loriplanreviews
Twitter - / emgo316

[@emgo316]

^^^^^^^^^^THE FULL REVIEW IS LINKED IN THE DESCRIPTION^^^^^^^^^^

[@cuatro2271]

it is our lord and savior emgo316 back at it again with the best of the best YEsSsSsSsSsSS

[@MTWENTY]

The stupid thing about this figure is that the amount of transformation steps is actually pretty simple, but the clearance issues and lack of proper tabbing makes it 100x harder to transform. I spend 95% of the time trying to align everything as opposed to actually transforming.........

[@sphyrid2009]

MTWENTY same

[@cuatro2271]

I gave up after trying and my dog ate the instructions sooooo I went here... you are RIGHT!!!!

[@SeanHogan_frijole]

Me too

[@DaSoto21500]

My fingers are sore from trying to transform this figure for over an hour, and I still haven’t been able to line everything up at the front and top of the truck mode, the fact that you were able to do this while filming the entire time is an incredible accomplishment

[@browneye010]

And everything snapped in pretty much 1st try also lol

[@Nr1from1978]

This is why they sell it while in robot mode

[@nautical183]

@AUSTIN DEMAS I did it. Fun tip.......... do the side panels for the doors and the windows first before doing the front, when u do that everything lines up for the most part.

[@nautical183]

@AUSTIN DEMAS awww man he is so fun for me I love playing with it/ showcasing it( With the occasional fling of frusturation)

[@meputochannel3517]

With this one not so much but Jazz killed my fingertips. Ironhide did stress me out because the damned front section just didn't want to close properly. I found a small tab on the table so something broke with all the force I applied... no idea from where yet. Once I get it back to robot mode, that's how it will spend the rest of his days on display.

[@joshuaromerogonzalez945]

8:58 you can also use those pegs to lock the shoulders in robot mode by lifting the GMC's front and plugging the wheel in those pegs which end up under his chest

[@Conter87]

Ok, I broke both side rear view mirrors, but I finally made it back to truck mode. Hardest transformation ever.

[@jaycob1830]

Was suffering for 2.5 hours with trying to put the hood together. Eventually gave up after not being able to take tabbing something in and the other thing untabbing. Pissed me off to no end, just gonna have it in robot mode forever, hasbro needs to make a 2.0 version of this figure where it has more than 2 tabs on it

[@TransDrummer1312]

How the hell do you get the hood to tab together? The two big grey tabs are fighting me and seem to be there JUST to inhibit the transformation

[@toad_masteg7258]

You know what would be nice a masterpiece crosshairs

[@Ominous_ice]

Yes

[@bfrxcrpgfhanzux]

Oh god how complicated would that be

[@DMSL2007]

I just got Ratchet last week and i have all the first movie Autobots in vehicle modes, so now i have to what i have dreaded for years....transform Ironhide....WHAT A NIGHTMARE....tried it several times can not get it to work, either the sides do not plug in or the hood just won't click together, worst MP in my opinion, we need a 2.0.

[@faithite]

I broke the side door while trying to transform it back to the pickup truck. Left a white hairline crack. I then used a black permanent marker to cover that white line. The front wheels are so springy that it doesn't keep straight when the truck was placed on the table. 😞 Design is not that friendly. Good luck people.

[@tonyramirez674]

Thanks you emgo, I did not know what the transformation to a truck was like. You're the best.

[@welingtondias5900]

another excellent video: well detailed, explained..

[@bradleycombat7934]

this figure was unnecessarily hard to transform

[@44hunter15]

Thank you so much for this video helped me so much, your awesome emgo :)

[@kitrocks8058]

My figure must have some sort of defect cause even after using this video and following it to a T, i was still unable to get the front of the truck to compress together. Also my arms are so loose on my copy it might as well be a string holding his cannons on to his shoulders.

[@Nr1from1978]

An absolute nightmare to transform. Been working on it for 3 days now. Hands won't tuck in correctly. Hood doesn't connect. Front wheels keep flapping inward. Horrible. Even worst than Barricade and Bee.

[@bmeksyk]

For the first time in 2 years I was finally able to somewhat transformer it into truck, I've watched hundreds of your review videos but never a JTI. I never knew you do Robot to Vehicle until you told me

[@emgo316]

You should’ve checked them out to see what the JTI was all about. You could’ve gotten him transformed sooner lol

[@bmeksyk]

@@emgo316 bro, 50% of the reason I watch your videos is because of your coments, I opened a JTI once and quickly switched to another regular video 😂

[@emgo316]

Then you should’ve know from that one video that I start it from how it’s packed.

[@bmeksyk]

@@emgo316 I didn't realized it was robot to alt, you know, thinks you take for granted... On another topic, are planing on getting the toyworld WW2 transformers? Specially bulldog and the seekers?

[@emgo316]

I already reviewed those

[@Multiversul_edits]

I have been trying to transform it for a hour now but what’s stoping me is all the cheap tabs and even get me started on the front

[@frankschuler2867]

Good job, man. I realize some people have gotten some bum copies of this figure...but I think there would be a larger number of happy customers if only everyone treated them with the patience and attention to detail that you do. After watching your videos on this guy, my opinion has gone from disappointed to optimistic. I do not own this one yet...but thanks to reviews like yours, I might just pull the trigger on him.

[@YakAttack64]

i thought exactly the same until i actually bought him. this thing isnt a transformers. its a fucking puzzle. Without a doubt the most frustrating thing i have ever done in my life.

[@maraj1014]

Yea man I understand your logic here but the figure is ABYSMAL in hand.

[@clowreviews]

F--- Ironhide. Every one of them. MPM, BMB, BA... they're all a nightmare. MPM is "easiest" of the lot, BMB 2nd, Black Apple is next to impossible!! I don't ever want to put myself thru this again!

[@ericadams5294]

This music sounds like it belongs in the stewart little ps2 game

[@NorionXT1124]

Excelent job EMGO,

[@DiegoMartinez-nm8hz]

Nice job emgo

[@Joey-jw6ym]

I still think these videos need your colorful commentary! Love your Channel!!

[@deadpool9327]

Nice one ego. All transformers fan are watching ur vids

[@jhonpaulmarquez4538]

M0bve

[@jhonpaulmarquez4538]

M0bvie

[@NIGameYeah]

Emgo your just transform it videos music reminds me of crash bandicoot 1

[@Chef326]

Hey is it just me or did som people that got a copy that said GMGMCMC on the grill

[@maraj1014]

the grill can flip around follow the transformation on his review

[@kahlaarabbani2907]

I really don't know if i should collect mpm or studio series figures. The SS lines are great, the prices are okay, and it's not complicated. Mpm in love the accuracy, but it's expensive and complicated. I like complicated transformations but if it ends up flopping all over the place, it's not worth it. Tho i might give it a chance

[@willsmith3475]

Transformation step at 6:17 where the hood pieces twist from the angle that they were on the chest to straight simply does not rotate on my copy. It feels like there's almost like threadloc on the metal piece its so tight and it has absolutely no give. Only the one side, the other side twists absolutely fine. Any suggestions for it to give?

[@tamarockstar09]

You know the fix for his arms is out. There is a tab under the tire/wheel and it tabs to his shoulder so it doesn’t move.... just saying...

[@TheBatman39]

Link?

[@Joyy_Da]

I did this, now one of my shoulders is trapped in the tab and won't move. I feel like it's gonna break

[@matthiasplatz5919]

Emgo, what is the name of the music you use for these JTI videos?

[@spartenkillerx]

If there going to make MPM ROTF which they more then likely will they batter fix the iron hide and not rerelease the samething with no changes

[@nhanlam6890]

It look so real

[@Dogboy394]

for me i cant get the windows to go in

[@pychokiller8930]

THIS IS SO STREESFULL!!!!!!!!!!!!!!!!!!

[@Noble21012]

I can’t transform him it’s so hard it won’t tab in at the front of the truck

[@dmc2008]

At 12:49 mine just snapped into shards... sigh

[@kevinz158]

I still can’t transform Ironhide into its vehicle mode

[@kevinz158]

Yo!!! I finally did it after 2 years!! i just had to shove everything in place (unscrewed the hands as well). Thanks Emgo!

[@jackiefannin8616]

This is very close what i had when i was a kid :[

[@andrewknepp2964]

Noice

[@gamalieltorres7842]

The front was so hard to understand I couldn't get it thanks

[@TitanusPrime17]

To bad that iornhide died in infinity war

[@nautical183]

wtf

[@lt.creggar5903]

I just snapped the clear plastic tab off the left windshield piece trying to get this piece of sh*t transformed. You’re instructions are good, and make it look easy, but it’s not. Now, where’s the aspirin!!

[@GrummanF-14BTomcat]

Am I the only person who thinks that this is really cool?

[@dennistan2055]

👍

[@xp8343]

Hi

[@bryansierra6140]

Hello

[@iiwarlordii4858]

Holy hell I just got this figure and what everyone says is true this thing is a pile of junk, a really good looking pile of junk but you can only polish a turd so much. My figures left shoulder is fine with transformation but won’t properly tag in, the Right shoulder is the complete opposite won’t transform properly but has 0 issues tabbing in

[@Damnsonwheredyafindthis]

OMG YOU DIDNT EVEN MAKE A SOUND OF RAGE.!!!!!!

[@emgo316]

Nothing to rage about

[@chipsandsalsa2535]

Lol

[@reverent9574]

heart my comment