Wow, I can't believe all that have suggested crowd funding the restoration of this tractor!! I'm usually not one to ask for charity, but I think I can give something back by showing you all the revival of this tractor from start to finish. I am setting up a GoFundMe to help with the costs, with some special perks like getting your very own (although worn-out) keepsakes from this tractor. I'm thinking a cleaned-up piston would be a good start? In Friday's video I'll have an assessment of the costs to restore this tractor to operating condition (and maybe even new paint), and launch the GoFundMe. Stay tuned for details! Also, other creative funding ideas are welcome!
@poeticjock4 жыл бұрын
Great plan. I can throw in a few bucks. 😁
@collinsloan25934 жыл бұрын
You’ve taught me more about general engine construction than a lifetime of other sources! Thanks!
@zodszoo4 жыл бұрын
Awesome!! Looking forward to it. You, know, we're ALL gonna consider this "OUR" tractor once it is completed. ✌️
@samanthamonaghan75794 жыл бұрын
I think it is good as it is keeping a good thing alive, a piece of living history, that is a positive. Without food you cannot have a community.
@jplessard71104 жыл бұрын
I’ll give you 40$ post a link
@Kristian_Saile4 жыл бұрын
I like the crowd funding idea. Some value to preserving family, and Farmall history here. Such a fascinating design.
@bobmoe59344 жыл бұрын
I’d chip in.
@algomaspur4 жыл бұрын
I'm good for at least $20
@petermaguire62804 жыл бұрын
Good luck mate
@jameskirk4484 жыл бұрын
I would donate $20!
@salolsen79534 жыл бұрын
@@bobmoe5934 è the
@harrisonchevy44523 жыл бұрын
Hi Pete, this video was very interesting 🧐 to me, but I guess a little sad 😢 for you. Sad that they no longer make parts for this model tracker. Good luck 🍀 in your hunt for parts.
@JTFarmGirlLife4 жыл бұрын
Don’t give up yet! My husband and his father have restored a lot of tractors and love M’s. Going to ask them if they know a better place to get parts and will get back with you.
@Flippin_Crazy4 жыл бұрын
Sitting here watching you Pete. Just like 60+ years ago on one of these old girls❤️ with my Daddy! In his garage, freezing me arse off-but couldn’t miss a thing. Believe it, my Dad used to tell me what you’re telling us now. Step by step groan by groan. I love y’all. Happy Holidays!
@jeffkoval51474 жыл бұрын
I've been working on an Oliver 88 diesel standard that started as a simple engine rebuild that snowballed into a major rebuild. Needless to say I've spent twice the money I wanted to but my wanting to see the tractor work again outweighs the cost. I keep telling myself it will be worth it
@samjohnson56564 жыл бұрын
Heck. Worst case park it for now in the corner of the barn, start setting a few bucks aside regularly and then when your boy is a little older use it as a father son project to teach him how to in frame overhaul a tractor. Love you shows! Keep them coming.
@coracobb39172 жыл бұрын
Really enjoyed this episode. I HAD to work on my cars when I was younger because buying new wasn’t an option. Watched my brother then had to do it myself but he never explained it like you did. The lightbulb has gone on and a lot of what I had to do almost 40 years ago now makes sense. You’re an excellent teacher!
@darrenphillips99143 жыл бұрын
Love your videos . Wish I had your knowledge you have on motors .
@tylerdever21464 жыл бұрын
Stumbled across this channel ~4-5 months ago and been hooked since. Keep up the great work and hope you’re able to rebuild this engine!
@Rebellion17764 жыл бұрын
Pete, a theme through all your vids on this Farmstead is finding a way to get done what needs to be done. You have done that time and again on all the projects I have seen you do, this will be no different. Your not a quitter Pete, you keep moving forward on everything you do. Crowdfunding is a great idea, and something I think a lot of us would be happy to give towards. Great project, and I have faith you will find a way to get it done. 🇺🇸
@paulciampa4 жыл бұрын
Please continue to rebuild this not only is it a family member it is America at its best....if you open a go fund me you might be surprised
@roseknott28323 жыл бұрын
Isn't there something called a Patreon where you support the KZbinr?
@gfletchall14 жыл бұрын
Pete, I have to say your story speaks directly to my soul with your channel and your story. Your are about a dozen years older than me, but I grew up on a hobby farm with my grandparents and spent the summers visiting my dad's folks on a grain farm in Central Iowa. There was always something so satisfying about working hard all day and being able to see what you have accomplished. I also work a executive level software job that grinds your soul away and dream of going back to a simpler life. I have to say you are an inspiration to the folks that are stuck in the daily grind. Being able to go and do what you love is something we all aspire to be able to do someday. In addition to being in favor of crowd sourcing for the rebuild of the MD I would also like to mention that I would be the first to sign up for Patreon if you were to implement it on your channel. I love getting a notification that you have put up a new video it is a great way to end the day.
@philipingram16674 жыл бұрын
I would suggest you consult with an engine builder to repair / install a ring pack on your pistons. It can be done with success but the average shop can not do it. My opinion on how the top compression ring and land was damaged is ether - I saw it many times in the course of my career and always no one knew anything it happened but they wanted me to pay for the repair as a "factory man". Good video - keep going -- I get a vicarious thrill watching you do your thing on the farm - Happy Holidays.
@timwagner91704 жыл бұрын
Love watching this! I rebuilt an 1952 ford 8n $475.00 . You will have to sleep on it. ! Good luck finding parts. Never seen that bearing test before! Very cool.
@genewileyopa4 жыл бұрын
I just bought a Super M from a friend last fall. His dad bought it new in 1950. My friend drove it home from the dealer. He's now 94 years old next month, and was happy it's staying close by. They never had any children so it was up for who ever got it. Has a loader on it. Nice old tractor. The rear tires are original. They don't look that bad. It's been inside when not in use. It chains on it. Glad to be the owner of it. Thanks for sharing this video. Watching from Iowa -2 degrees out.
@mihandsplitters7054 жыл бұрын
Starts turning into real money quickly! Hope you can find all the parts you need. Thanks for the video. Merry Christmas to you, your family, and all the other subscribers to this channel.
@annwitzel96304 жыл бұрын
Using my wifes account , Engine has had a lot of wear in the cylinders , note the piston skirts have been knurled to expand the skirts to take up clearance caused by wear . I worked in a shop for over 40 years and have not seen pistons knurled since the early seventies .
@tommcmillan31434 жыл бұрын
Pete, Count me in as a fellow Farmall owner to chip in:). I figure you are teaching me how to do my own rebuild in the near future, that has real value that deserves compensation. Just old fashion bartering and nothing wrong with that! Go for it, I think it will be win-win for all of us.
@donbright33404 жыл бұрын
You are an excellent teacher,sad that most of our public schools have very low standards for teacher accreditation,and our universities are also deficient in useful instruction .Must continue to gain knowledge after formal academia is completed.
@anthonysmith31874 жыл бұрын
Thanks for rebuilding this old tractor I find it very interesting and educational.
@zodszoo4 жыл бұрын
I say press on with the rebuild. And may I add that you're a fantastic teacher as well. Appreciate your sharing of knowledge.
@jackfrost14604 жыл бұрын
Hi 🙋🏻♂️ Great video 👍🏻 I’ve learned more about a MD in ur last 2 videos then i thought there was to them! I grew up with John Deere so that’s what I know about. I can c that it’s a lot of money to get it back to working order but with that being said it’s part of ur family history and if u don’t do it you will not be happy with yourself ! And if you say well I’m going to wait awhile before u do it parts will become harder to find and cost more yet. Sorry to say the old tractors r just like us . They r showing their age and wear and tear from years of work but, I hope the docs will keep fixing us so we can keep working . Sometimes you just have to let ur heart and memories guide you and not ur checkbook. 🤔 just something to think about
@karenschlenker12414 жыл бұрын
I have faith in you what ever happens , when I start needing a friend to help to start my homestead you will be the first I talk to, especially when it comes to dexter cattle, you know your stuff Love your family and hope you can help me in the future. I feel like you are family. You are real and special to me, many great info. Love all the info.
@dennishutchinson4 жыл бұрын
I hope you are able to go through with the rebuild. Seeing how complicated the MD is, is probably why my Dad and Grandad sold their 1949 MD and bought a new 1954 gas Super M-TA which I now have. Dad never bought another Diesel until he bought a 1086 in the 70’s. I’m planning to rebuild the M-TA this next year. Good luck and Merry Christmas!
@Don_ECHOguy4 жыл бұрын
Great video and love the IHC's, I still have an old W-4 on rubber, a McCormick Deering 15-30 on steel, and a McCormick Deering 22-36 on steel all running in good shape too. Good luck with what ever you decide on the MD.
@terri63424 жыл бұрын
Tough break about the engine. I love the funding idea and i am willing to chip in for costs. Good luck.👍
@BrettCraft4 жыл бұрын
Very informative. Thanks for taking the time to make the video, I know it can be a pain to keep moving the camera but you do it well.
@SandmansWeatherLab4 жыл бұрын
I love the video style of this! You can actually see what you’re doing while you’re discussing what’s going on. I like the crowd funding idea as well
@johnryder75314 жыл бұрын
You will like driving that MD with the tricycle front. It's a very different experience with much more maneuverability. I hadn't driven a tricycle since I was very young and I really like my JD MT. It's probably not as stable on hilly ground but I'm not in a hurry and I'm not trying to make a living with it. Preserving history one tractor and one piece of equipment at a time! That's the motto of our club, The Chautauqua County Antique Equipment Association, in Stockton, N.Y. Merry Christmas and Happy New Year Pete to you and your family. Keep up the good work.
@robjustlooking87293 жыл бұрын
When I was a kid back in the '60s messing around with engines I knew a guy who worked at an IH dealership. Never forget what he said, "The numbers on the rods always face the camshaft, except on a Reo." Never had the pleasure of working on an old Reo engine so I just had to take his word for it.
@timreap3r2864 жыл бұрын
You make mt favorite homesteads just wish there were more of them. I enjoy the fact you are very intelligent and factual, rather than slapping it together and saying well its a farm and shrugging it off.
@chrism.22314 жыл бұрын
Look on the bright side. At least it is not a race car. I had an issue (years ago) where the machine shop thought they were doing me a favor by seriously decking the block. When I was going through my initial assembly and tried to turn it over, the valves hit the pistons. What I did not know at this tender age was with a Ford Kent engine, that would be enough to bend a valve. 30 minutes later at the track, I had a useless lump and a lighter wallet. As for the crank, I put a Kohler together on the cheap this year that was only a thousandth out of tolerance at the crank and it did not go well. Best of luck with it, Pete, and Happy Holidays to you and your family.
@chaunceypullman33804 жыл бұрын
You are an amazing man. I love that you and the family sit around and talk. Just like it was with my family when young. Don't find that too much. Keep up the great work my friend. Merry Christmas to you and yours!!!
@anthonyhengst29084 жыл бұрын
Wow, I'm real sorry to hear that. I don't pray for tractors much but I'm praying for this one. I grew up with the green tractors but any classic is beautiful regardless of its color.
@JC-uq5gi4 жыл бұрын
Very interesting Pete. Thank you for sharing this. Looking forward to seeing what happens next. Sorry for your pistons being unusable. Hopefully you don't encounter more discouraging flaws.
@glennvandervliet10284 жыл бұрын
Your knowledge of the engine working is very valuable. If you would have to pay for all the labor needed to get the motor going you might have to more than double the cost. Yet the cost is not making this an easy decision. Have a great Christmas and you and your family safe and healthy.
@76RSLT4 жыл бұрын
That crank is out of a Super MD. The standard MD did not have the counterweights on every journal. Keep going!!
@1972BRJ4 жыл бұрын
Restoration videos are popular on YT! Especially when they involved an Iconic Tractor like the Farmall!, I love vintage machinery like that, I have an old Lawn Boy 2 cycle mower, carbon damaged the piston in it the same way. I still want to rebuild this mower some day, It's a 1977 D-400 engine, very hard to locate a cylinder for it, I have new piston and rings. Maybe someday! Love the video!
@kiprussell61024 жыл бұрын
I hope some creative funding comes through. It would be a shame to lose this piece of the family history of the farm. Please keep us posted on new ideas and how to participate. Keep up the good work and God bless you all
@mrpesky1634 жыл бұрын
From the cheap seats, as you went to the manual to look up the rod bolt torque, I was thinking given how they came out; "he's gonna need a longer bar, and three men and a boy to help!" 😃👍
@jkdwayne4 жыл бұрын
Worked on many and M and MD back on the farm , the MD were a problem child . Cracked heads , cracked sleeves , oil consumption. This one looks like it had a combination of issues ,overheating and possibly low fuel rate , that broke those rings . the heads broke frequently if you did not give them a long time to heat up on gas , and switching to diesel before you started to work them .
@thomassippel21464 жыл бұрын
Pete, I would suggest replacing the mains and connecting rod bearings and prolbably the cam bearings. They usually are shot. Do it right the first time. Those are basically out of spec. I guess it depends what your going to use the tractor for... if ya do it right it will still be working in 25-50 years from now. I am in the same boat, bought a 1959 JD 430 crawler that was siezed. It is kinda rare has a mechanical reverser, and #90 loader. Ended up getting a new engine block as it was cracked. It needs, new pistons, and mains/ conn rod bearings. Cylinders bored out. Main and conn rod journals are just out of spec with slight damage to the crank. So that will get turned as well. I'm still in the parts gathering stage.. With engine rebuilds, I always have been told do it right the first time... good luck on your decision!
@KennyKizzleRustyNutzRanch4 жыл бұрын
Man, I have pulled a lot of engines apart and I have never seen carnage that bad before. I mean, I have seen photos and videos of sheer catastrophe (rod through the block, etc.), but In my personal experience, I have never seen disintegration and wear of the pistons like that. Amazing.
@tommyt88574 жыл бұрын
Man! That sucks. I hope you're able to find a way to rebuild it. Hopefully this isn't the end of it's life.
@stuckinthepast3004 жыл бұрын
Sorry to hear!! Itd be really awesome to see it running, but at that cost, its crazy, Great info on engine take down here on the flipside, Great vid as usual 😎
@jasonbabcock27424 жыл бұрын
I did my Ford 2n last spring. It's fun to watch someone else go through the same process.😬
@gerryjamieson18614 жыл бұрын
I happen to stumble across your video. Wow. So informative and educational. I appreciate your honesty about the cost factor. Most of us don't have money trees growing in our backyards. Having to weigh the sentimental versus the financial cost of rebuilding can cause serious friction in a relationship if the sentimental "always" wins. Take your time to think on it, do your research (which it sound like you have), go for a coffee with a good friend preferably with your significant other and ask for some FREE advice. Looking forward to your next installment. I am now a new subscriber.
@Primerk54 жыл бұрын
Friend of mine had 7-8k in just the engine on his MD. Between parts, machine shop bills, and injection pump/injector overhauls.That being said, there are only so many family tractors. Hopefully you don't lose the wind from your sails. Rome wasn't built in a day. Might want to slow the rebuild for a while to stretch out spending. Good Luck.
@whit42754 жыл бұрын
After my dad retired from farming, he bought a 1954 Farmall Super MDTA. He always wanted one of these tractors. It turned out to have some issues. I told him once I started opening it up, it could be a lot of money or may not be able to find parts. He didn't keep it long....
@pstkemp4 жыл бұрын
Broken Top rings, I've seen that before that's a tell tale sign of starting fluid use. Saw that on a VTA 1710 Cummins engine. They would spray starting fluid in one side of the motor to get it to run on cold mornings. When we pulled the head off everything on the left hand side had broken top piston rings.😖
@PaffordHomestead4 жыл бұрын
Great old tractor it would be nice to see it run again 👍
@robertleigh5594 жыл бұрын
Wonderful stuff. Suddenly I know how an engine works, and I never did before. Great relaxed presentation and clear diction.
@elricm134 жыл бұрын
Great video. A decision many of us have had to make, unfortunately old diesels take dollars
@lenoggle14 жыл бұрын
I'll chip in too! love your detail coverage!
@craigywaigy47034 жыл бұрын
Nice video. In my experience it's easier to split the gearbox from the engine on old, unmaintained machines as the clutch, starter ring, thrust race.... will ALWAYS be in worse shape than the engine being over hauled - Grunts will drive without a clutch for some time, but can't without a functioning engine! A few extra hours at the start saves a LOT of tears, busted knuckles and back/knee pain later. Keep safe and well.
@ClayunderSeal4 жыл бұрын
Even tough i have no idea about engines, im still in love with these videos. I would also like to give you a tip for rebuilding that tractor, wish you wonderfull christmas, greetings from germany !
@andrewhenseler12624 жыл бұрын
I am currently working on a engine out of an M at the machine shop I work at. Neat to see the differences between them. Keep up with the great content!
@edmedlin29364 жыл бұрын
Torque is measured in pound feet, not foot pounds. Fun watching you turn wrenches, etc. Thanks for the cool video, I also have worked on old tractors, and big diesel engines as well. eD
@davidparadis4904 жыл бұрын
I'm really loving these tractor restoration videos
@DeTransAllianceCanada3 жыл бұрын
So glad you went forward.
@timh94074 жыл бұрын
Might have to sell a couple of dexters but I think the satisfaction will be the same as in restoring your house. Keep that family heirloom in the family and ready to be used occasionally for a f e w more generations.
@mikefuhrman4584 жыл бұрын
Hey Pete, don't give up here. there are other options. The skirts look good on your pistons but the ring lands and the top of the pistons are damaged, so what. Find an old timer and they will weld those pistons up and turn them down on a lathe. the tolerances on the top of the piston are not that critical, just make sure the ring lands are machined for the right side clearances. The sleaves can be honed with a good hone and straightened up. Purchase an oversize set of rings and file fit the end clearances. If needed, once again, find an old timer that works on old engines and they can knurl the piston skirts to fit the cylinder. It will take some work and time but you'll be happy in the end. Don't worry about welding on the pistons, tractor pullers do it all the time. Good luck.
@martinfidel70864 жыл бұрын
Maybe these are old enough to be "round" pistons and not the later oval pistons, it won't help for long as the excess piston to bore clearance is what caused the rings to overheat and but away the piston, this engine needs new sleeves and pistons to give it any chance of success.
@danielakin76384 жыл бұрын
I feel your pain trying to find parts. I would go ahead and do bearings. We are overhauling 806 diesel in a few weeks so I know how fun this stuff can be. It might be just cheap to find a running md and swap the motor out and keep your motor for spare parts
@JustaFewAcresFarm4 жыл бұрын
Great tractor you have there Daniel! I love 806's. Best of luck with your rebuild!
@bee-u-tifuladventures47714 жыл бұрын
Great video, as always. Thanks for taking us along on your adventures. Merry Christmas to you, your family, as well as everyone here that make up your KZbin family. :-)
@austinswift99664 жыл бұрын
Hey Pete! Just rolled a old case 200B with a Dearborn loader off my trailer. I can wait to get into this project
@JustaFewAcresFarm4 жыл бұрын
Good luck with it Austin!
@greatlakespowerstrokefx42 жыл бұрын
Iv really enjoyed the md videos pete. Thanks for all the work on them
@CecilliaDB4 жыл бұрын
We’re you a teacher in a former life? I have NO interest in tractors but I love the way you explain and present the information. So, I watch anyway!
@bradleygray4074 жыл бұрын
Long time since I have seen anyone use plastiguage. My father used to use it when rebuilding engines. Like the video brings back a lot of memories for me.
@CB71SS4 жыл бұрын
I used plastiguage a lot when I was rebuilding engines in the late 70's and early 80's. It never let me down. Would not hesitate to use it again.
@bradleygray4074 жыл бұрын
Its been years since I have rebiilt anything with my father. Just reminiscing over some great memories. Will be nine years in January our family laid him to rest.
@jakefrechette32244 жыл бұрын
Hey Pete! Love watching the teardown and rebuild process! The engineering history is certainly fascinating. I'm curious if you have ever considered reaching out to collaborate with fellow KZbin creators before? I am a subscriber to Alec Steele and he is also interested in restoring old machinery (specifically powerhammers from the era that may have been used in creating these tractors). Its just a thought but I bet that both of your viewer groups would benefit from the content on each other's channels and maybe Alec can help you get this tractor up and running for a little cheaper. Regardless, good luck with the restoration and I can't wait for the next video.
@samanthamonaghan75794 жыл бұрын
This video is a great showcase on why maintenance of equipment is so important.
@stephenlewis31934 жыл бұрын
Sorry for the damages, let's hope you can find decently priced parts. Due to timing, this is probably the last time I check for updates for the next several days. So...... Merry Christmas and Happy New Year to you, Heather and the family.
@stephenlewis31934 жыл бұрын
So sorry! Had someone talking to me while I typed. I should have said Hilary not Heather. Heather is from another channel.
@JustaFewAcresFarm4 жыл бұрын
@@stephenlewis3193 That's okay! Have a Merry Christmas!
@stephenlewis31934 жыл бұрын
@@JustaFewAcresFarm Thanks. My excuse is, as I'm in my 71's year, perhaps I'm getting a little (probably a whole lot) befuddled. Which, by the way is a great excuse I use everyday. I love saying to sales girls "I'm just a, half deaf and senile old guy." That always gets a chuckle. Cheers
@jonjohnson89604 жыл бұрын
Really took me back, my grandpa worked on these MDs long before my time and a lot of my favorite memories of him were his stories of working on them and using them. Great video- new subscriber and fan for sure
@ThisOldFarm4 жыл бұрын
Wow, those pistons are in very rough shape! That is definitely discouraging sight to see when a person opens up an engine, but I hope it wont keep you from rebuilding this one. I can't wait to see the fate of this tractor, and hope that you will choose the rebuilding process!
@jplessard71104 жыл бұрын
Love these videos, I wish you were my neighbor. Great content, great videography
@anderssandberg54084 жыл бұрын
The last piston looks so bad, I hope you can manage to fix the tractor, good video!
@johnmiley4584 жыл бұрын
Others may have told you. It looks to me like some one used to much starting fluid. On a engine like that I use no more starting fluid that I would use on a small single cylinder lawn mower engine.
@farmalllover82174 жыл бұрын
Nice video. Love seeing this tractor get some love. Honestly I’d just do bearings too. Your already in there. You should just do it now it’ll last longer. I know it’s more expensive but.
@YodaAz584 жыл бұрын
I knew it was going too easy! Good luck in future endeavor!
@robertpepper27674 жыл бұрын
I sense some serious contemplation “Not one corney dad joke” so sad. Good luck with your project!!!!!
@zachwiz47094 жыл бұрын
Sorry to hear about those pistons, Pete. I hope that is one of the only major things wrong with it.😕
@frankcadillac91514 жыл бұрын
I enjoyed this Pete, especially because I don't have to buy the parts and not even get my hands dirty. Don't rush buying parts there may be similar pistons and liners that will work ask around. Bad comes to worse you could probably install a gasoline "M" engine. Good luck Pete don't despair, things will settle out. Like I said those diesels were used in other equipment and power units.
@howlinhairyontheprairie82614 жыл бұрын
That was really clean, good maintenace. I am surprised that there wasn't any cylinder wall damage. Very interesting video.
@lackagreaseequipmentrepair69844 жыл бұрын
I like the Assembly lube and plastigage idea. but if you want the plastigage to stick to the bearing cap. I think I would’ve put the assembly lube on the crank with the plastigage in it. Love the down to earth videos.
@michaelmenegus59884 жыл бұрын
Just an observation, it looks like those pistons were knurled to decrease the bore clearance. It’s the old way to get a few more hours out of a set of pistons in a worn bore. The top ring damage is epic, but consistent and I can only speculate as to the cause, but only a few things cause that. One thing that can cause that is if at the last overhaul the ridge wasn’t properly removed and the new top ring crashes into the old ridge. The other is ether, I’ve seen it do similar things on other engines. Unless the MD has some other finicky things going on, I’m out of ideas. Never worked on an MD, but I have plenty of experience with the 282.
@Bobbycat1154 жыл бұрын
#1 reason for broken compression rings is the use of either or some type of starting fluid ! Ask how I know = 45 years HD Mechanic now retired ...
@rossryder9444 жыл бұрын
Been at least 55 years since rod bearings were replaced, and still in great condition. And 9 years less for mains, and slightly more worn. Just curious, would an M have faired this well over the same time period? Perhaps at least part of the cost difference is the longer rebuild interval? Conceptually, it could be that your grandkids are the next rebuilders... My uncle was an inspector at the Farmall plant in Moline in the 50s. He could have overseen the assembly of this MD.
@JustaFewAcresFarm4 жыл бұрын
Hi Ross, I think this engine was over-engineered even more than a regular M. The bearings are much larger, and consequently don't wear as fast, even though the diesel engine is under more stress from higher compression. Even today's diesels have a longer interval between rebuilds than their gas counterparts. That's so cool about your uncle!
@scottleininger6201Ай бұрын
Great info on the MD
@macfarms4 жыл бұрын
Sometimes it's hard to know what to do with these old tractors. I think looking back now you might have been better off painting that other tractor instead lol
@JustaFewAcresFarm4 жыл бұрын
I had the same thought!
@macfarms4 жыл бұрын
@@JustaFewAcresFarm the MD could be worse I guess, I started my project tractor this fall with a rod hanging out of the block lol
@donrougeux21224 жыл бұрын
Might check ring end clearance--may have been too tight when rebuilt..
@johnmeeks96184 жыл бұрын
When I worked at a Concrete Ready Mix company, while going to college, a breaker bar with an extension on it was called a "Stilson".
@Mdotis1004 жыл бұрын
Steiner Tractor parts has an MD piston on page 267 for 11.95. Not sure if it really will fit this old girl but give them a try. I have not looked for sleeves yet but they have many many parts. I will also add a few $$ to the go fund me page. I am learning a lot and education is price less. Still working on my old H It is running but needs just a few new parts. It should be ready to paint when the weather turns warmer. I love old tractors. You might also think of contacting some of the piston companies as they may have one that will fit. Just a thought. Thanks again for all of your hard work you put into this.
@JustaFewAcresFarm4 жыл бұрын
That's a piston wrist pin bushing, not a piston. I do buy some stuff from Steiner, but they would not be my first choice for engine parts. Steiner does not carry pistons, sleeves, or bottom end bearings for MD's.
@BronzeBowFarm4 жыл бұрын
impact wrenches are the best tool investment I've made yet. I know sometimes its nice to disassemble by hand to see if something was too loose or too tight tho.
@williamvancoller34214 жыл бұрын
Pete, loved the vid!.. I recently rebuilt an old JD3130 in a similar fashion. Never had done one before. Made my own sleeve puller that made the job simple. Good luck , Greetings from Africa!. ps. Next project: Case 1056..
@myforeverhomestead61523 жыл бұрын
This was such an interesting video, I learned a lot thank you!
@mrpesky1634 жыл бұрын
Dad joke: that MD needs a doctor!
@martinfidel70864 жыл бұрын
looks like you've pulled ;)
@carlac.60864 жыл бұрын
I think you should set up a fund for your parts its a shame to see it parked in a lot and not using its full potential.
@genesloan31754 жыл бұрын
That's a worthy project even with the costs... And it's been in the family.... If it took longer, it'd be worth it to do.
@dennisthemenace88544 жыл бұрын
Your my favorite you tuber what are ya gonna do with the MD we want to no more videos pete
@stephendixon46194 жыл бұрын
When deciding whether to rebuild this tractor or paint the 656, you said there's little this tractor can do that the H can't do. But the reverse is also true, there's nothing the H can do that the MD can't, except perhaps slip into a very tite spot. As you said, many parts in an MD are made of that very illusive metal, unobtainium. And yes, you can use an M engine, but that's not the point for rebuilding the family MD.