STOP GETTING RIPPED OFF AT THE BMW STEALERSHIP!

[@justinbuice]

Complete F30 Mods List ---> geni.us/f30-mods

[@fcpeuro]

Air filters are always great to replace, and new oil definitely helps with peace of mind, but our favorite HAS to be the first rain storm you drive into with a fresh set of wipers. One of the best feelings!! Thanks for the support Justin, great video!

[@justinbuice]

I agree. I love any maintenance where I can immediately see or feel a difference!

[@DigitalDissident]

*Are you saying you're gonna sponsor this channel & send free parts?*

[@phi517]

@@DigitalDissident they already do 😂

[@bogdanarsene9602]

Why the special tec oil and why not the molygen?

[@ShiftedPerspective]

I also order so many kits from you guys and they are perfect! I makes owning a used BMW so much easier!

[@GeraldGGGGG]

Who here watched the whole diy even though we don’t own an F30? Lol Good stuff Justin! Keep up the good work! Will miss the E90! Much love bro!

[@edeaton1000]

Absolutely

[@supramantt10]

Still living that e90 life ... but I watched :)

[@CastroJordan]

I own a f30 but do all maintenance myself and can do it with my eyes closed but still watched.

[@AlexanderDreams]

I own a 2013 GT500 and I’m here watching and enjoying lol.

[@justinbuice]

I appreciate it!!! 🙏🏻

[@casabwana]

Hey Justin, thanks for recommending FCP Euro. Just ordered all new brakes (~$400) whereas the dealer wants $1680. Looking forward to getting back into the garage and that sweet feeling of doing the job. Update: brake job was easy & fun. Thanks again!

[@57RollsRoycePhantom]

Why would they charge that much? Are they seriously trying to scam customers? Wtf

[@Diegogoing]

@@57RollsRoycePhantom it’s not they try to scam it’s just at dealership they always be charging a lot for just easy stuff

[@micker9830]

I had the dealer tell me a similar price for brakes on my 325I. I did all 4, new rotors and pads for like $300 I believe, about $1300 less than they wanted and it was super easy. They have a lift, air guns etc and it would be so easy for them, probably an hour max. Not sure why they rip people off with that one, but that's a huge rip off service.

[@Dat550go]

​@@micker9830we definitely need to get to the bottom of this. Bring it to social media's attention.

[@LogosFarm]

Rotors, Pads, Sensors all around cost like $1,000 here after tax

[@tristianbilly001]

I gotta say on camera the fitment of them wheels is 100% on point. I've never seen an f30 with a wheel and tire combo that is so perfect. Wish I could see it in person. Color combo so good

[@justinbuice]

Thank you! It will look even better when it’s a little lower!

[@stephenhoward936]

About to tear this front license plate bracket 😭

[@carloscabral8008]

Just one thing, when you pull the wipers forward be very careful leaving them there while you grab the replacement wiper. If the arm snaps back it’ll definitely crack your windshield if there isn’t a wiper blade installed. I’ve seen it happen many times

[@justinbuice]

Good tip!

[@alcc4964]

I had a dealer crack my windshield years ago…lol

[@DrNormGutHealth]

Great tip, these tech windshields are pricey

[@ஓம்நமசிவாய-ட9வ]

Same here

[@DigitalDissident]

I drive an E82 in Germany where gas prices, zoll emissions fees, & all taxes... are crazy. Even 5 liters of motor oil is 20 more than in the US. The Dealership quoted me 200EUROS for oil change! So I happily do em myself for 50. Bought my BMW private & put 5000 in upgrades into it. (wheels tires suspension etc.) Dealership never got a penny & never will!!

[@trhuyanh1996]

Happy Working on Car and Happy Saving

[@brathahn5176]

But Autobahn!!!!

[@Music96able]

Würde ich auch machen. Möchte aber mein Serviceheft lückenlos haben. Bring dein Öl einfach selber mit und fertig.

[@iPlayzz]

Immer noch günstiger als in Österreich

[@jacksampson7711]

I've got a '15 435i and do most of my own maintenance. KZbin is great for info like this. Great video!!! FCP Euro is Da Bomb!!!

[@tpvang]

I feel more confident owning a BMW. Keep up the good work! Subscribed.

[@KiesMotorsports]

Great job as always 🔥

[@justinbuice]

Thank you!! 😎

[@hosiamokale1265]

Hey guys. So since the service book for bmw has been digitised, what does one do after services like this one?

[@GumballsAmazingWorld]

My wife has a F30 328i and I do all of the work on it for her as well. You can't beat FCP Euro's buy back deal they have. It cost me $25 to ship back my oil and filter to them but I get my money back for the price of the oil and filter which is right at $50. So , only costs me $25 to do an oil change with full synthetic!

[@georgealex19]

Hi Justin. Great video, just one note on the oil viscosity: engines with start-stop, modern turbos and modern engines in general go with thinner oil: reduce engine wear during start-stop cycles (cold starts induce most engine wear, the thinner oil helps), there’s a claim that the thinner oil helps the turbo cool (I did not investigate on this), the thinner oil also helps and provides better lubrication. Certified OEM oils of grade 0w20 also have a lot of additives that specifically help the modern engine in all the statements I’ve said above. I’ve discussed this at my local dealership when I had to do the car’s first oil change. There’s more to that oil than the viscosity grade. I’d recommend switching back to the 0w20 or at lest conduct more study on the matter.

[@heavyweight6440]

0W20 oil is a VERY thin oil. It was introduced to reduce emissions and make fuel economy better since this less viscous fluid has less internal friction than a higher viscosity oil like a 5W30. Start-Stop is bad, you should program it to be not active anymore. Turbochargers are now around for 20-30 years in car engines. They have worked with 10W60, 5W50, 0W30 and will work with 0W20, but 0W20 wont really "cool" the turbo better than other, thicker oils. It will be on the same level in my opinion. Cold-starts: yes, thick oil, like a 10W or a 15W is quite thick and wont flow as good as a 0W or a 5W oil, but there is no need to have a 0W oil if it only gets like max -10°C in winter. A 5W will do the job very good, and even that - there are 0W30 and even 0W40 oils on the market if im correct. But be aware: the higher the gap between the number in front of the W and after the W ther more additives and viscosity enhancers they need to put into the oil because the base-oil they use is very thin. That doesnt make an engine oil bad, but it makes it expensive. If you get REALLY cold temperatures during winter its justified to use 0W oil. If you have mild winters there isnt really need to. "Thinner oil = better lubrication": basically yes, since the internal friction of the oil is very small. But the thickness of the oilfilm will also degrade, which is good for emissions and fuel economy, but not very good if you want to redline the engine often or have high oil-temps. The cussion between static and dynamic object (cylinderwall and piston) will deacrease which CAN be bad - depends on how you drive. I think its a bigger problem on diesels, especially the ones with DPF. There is the chance of diesel mixing with the oil which will lead to the oil grading down to a 0W15 or something like that. In my opionion it is the better idea to use 5W30. If you live in a country with high temps in the summer you can even go to a 5W40. 0W20 is to thin for my personal feel.

[@georgealex19]

@@heavyweight6440 thanks for sharing your detailed input. I’ve had exactly the same rationale regarding oil viscosity until my current car’s 1.4tsi. Winters here go around -15/-20C at their worst, median around -7/-10, while summers go quite hot, 35/40C. My previous car and the one before had naturally aspirated gasoline engines. Being an European, engines here tend to be smaller, so the previous was a 1.6l unit, it used 5W40, for this climate that was perfect. But it had no start/stop, no turbo. My current 1.4tsi only sees the dealer’s service and for the first oil change I’ve had the same thoughts: “0w20 is too thin!”, but the dealer reassured me that it’s not the viscosity as much as the additives in this specific oil grade. I’d still be using the manufacturer’s oil recommendation, regardless of my classic oil know-how. The same was true with organic vs synthetic oils servicing periods. Organic would turn to jam, while synthetic still had half it’s interval. We’ll know if these thinner oils are crap, but on the long run. So far, my engine is working pretty sweet with it, but I rarely need to use the car so it only has about 9k miles (14k km) after 3 years, so I could probably put butter in it and it would still work, with my milage 👨‍🔧

[@MRMOUNTAINDUEM3]

@@georgealex19 Most of the tuned b58 guys I know, as well as myself, use Liquidmoly 5W40.

[@alanholmes2366]

Change it early and often. 0w20 for regular driving. If u are going to track it or give it a long road trip at high temps and into boost a lot go with an occasional 5 weight 30 it won’t hurt anything. Best thing is use a high quality oil like Liqui Moly! 4500-5k on a boosted engine will keep that turbo and the internals in great condition. Get an oil analysis if u want to stretch more out of it in between changes.

[@stephenhoward936]

Agreed colder start should be avoided and when forced running thinner oil in winter ❄️ then keep running

[@LanceLumbanPHI]

Man you saved me money for the past 2 years with my E90. Now I feel like I want an F30. :)

[@LpSc4life]

Just got my first bmw and this has been a huge help in getting more confident working on the car myself.

[@jg_media9]

Maintenance before mods. Always 👌

[@lilkloud]

Facts

[@captainsweatpants5229]

​@@lilkloudFact.

[@CafeundKuchenzeit2956]

I'm dealing with so much maintenance idk if I'm going to get to mods 😅

[@dustin9258]

“It’s not that hard you just have to know BMW’s way of doing it” basically summarizes every experience I’ve had when doing anything to my f30 lol It started on day 1 when I had to google how to open the damn hood lol

[@SlawcioD]

XD

[@5240reza]

Thank you Justin for this helpful video. I just replaced the engine air filter on my 2017 330 iX which was a breeze. Then I replaced the cabin air filter which was a total PIA. What a horrible design for the location of the cabin air filter. It took me fine times as long to do this than to replace the same filter on our second car a Toyota Highlander. I would not have been able to do the BMW job without these videos though. Thanks again.

[@michaelnikprelaj6679]

The dealership would’ve charged damn near $800 for all of this lmaooo

[@martynh5410]

I bet you’re not that far off!!

[@RDSxIVISIION]

They try to charge me $968 for just a spark plug change and micro filter

[@Xylti]

Martyn H I get charged 700$ for an oil change and almost 1200$ i think the last time i went for a brake pad change.

[@MegaFregel]

I paid 785€ for 3 years of services which I think is fair.

[@mannarmylie4195]

@@Xylti that correct. When i bought my beemer i had the dealer quote me a similar figure for just pads-no rotors etc. He had the wrong guy. I was just trying to get a feel for costs. I later installed Akebono on front and rear including new sensors for about $200 in parts. DIY oil changes w BMW oil is roughly $70. I change mine 2x annually. Easy job

[@bigdong101]

Consistently great videos dude, love the graphics too showing the screw sizes, truly thoughtful. I still own a e series but might get an f series one day but in still enjoying the insights

[@justinbuice]

Thank you! The small details make a big difference 😎

[@nandoalistar7390]

Good stuff man!!! A lot of your videos got me through when I 1st got my 328I xDrive! Keep up the good work!

[@martynh5410]

Great video Justin. And you are right about the basic maintenance being do-able by almost everyone. I learned to do the basic stuff as soon as the warranty ran out on my old E60 5 series. I also found that other things like serpentine belt / idler wheel replacement were easy enough to manage if you take your time and get a few basic tools. The amount of money saved by DIY an be very significant.

[@stephenhoward936]

I learned how to work on BMW WITH MY STEPDAD WE RESTORED A 73 2002 TII ! 4 CYLINDER MONSTER

[@Promisedland_garage]

You made me love bmw's Here watching from Puerto Rico

[@ajnmaragno]

Cool, Hello from Ireland. I also recently got my 330e and my first challenge will be changing the brake discs and pads. I actually enjoy doing it. 👊🏻

[@jidean2012]

As a dealer tech, I agree with most of what you said. Things to look out for. 1.Make sure you leave the wiper arm down between wiper exchanges. The arm will come down with out you holding it and break the windshield. 2.The screws are very easy to over tighten on the micro filter. This will crush the plastic door for the filter box. 3.Air filter isn't bad, BUT if you have an N26. Its easy to break the vacuum line off the air box. 4. You will by a new engine if you mess it up the oil change.

[@recklezz_9738]

Bought my 340 last year and the first diy i did was my spark plugs. About to try change my oil myself next 👌🏾👌🏾

[@jaymilo8425]

Bmw or not Justin has the best chilies videos, dude is chill gives great information and seems to care about what he is doing with no hidden agenda

[@018139548]

I don't own a BMW but I thoroughly enjoyed watching this video. Thanks Justin.

[@cherrybacon9790]

2:00 Concerning changing the wiper blades: I'd strongly advice to use a sponge or foam and place it onto the windshield, as the wiper arm may flip down breaking the windshield. This happens more often than you think even to professionals and is the main reason for windshield replacements.... However, Great Videos!!!

[@Ashley_van_Schooneveld]

Happened to me this year on my X5 😡

[@lytleric]

Great video. My one piece of advice on the cabin filter is to not necessarily reinstall it in the same direction it came out -- only because it is often installed in the wrong direction by whomever changed it previously (including the dealer)! I've watched a few videos on how to do this, and the filter that gets pulled out can be in the wrong direction, and the new one is then reinstalled in that same wrong direction. The arrows indicate the direction of airflow through the filter, which on the F30 is towards the FRONT of the car. (You did it correctly in the video.)

[@mddress]

Nice work Justin! I did in fact find your channel as I was researching the purchase of our F33 435 almost two years ago. Keep up the great work!

[@IAMMEMARIANA]

Thank you very much for these videos future hubby, 😅 as a DIY women I’m here watching all of your videos to maintain my BMW running like a champ!

[@hmikey5680]

Calm, clear, well explained - enjoyed the video bro

[@sirblack1619]

Ran across your channel looking for DIY on a BMW as I am looking to buy a used one. Thank you for posting this and actually showing each step in the process. This will help save a lot of money and time.

[@sammysays1570]

Saw the video today subscribed for life!!!! Great editing and VERY informative. I purchased a 335i last week so I’ll continue to build my car from learning on your channel!!!!!!! Thank you

[@ArrtusMusic]

It's also just as important where you purchase your things from. I highly recommend FCP euro for their excellent service and genuine parts.

[@justinbuice]

I agree!

[@aivc90]

Great Video!!!! 10 year BMW Tech Tip!!!!! I would stick to using the OEM filter. I haven’t really come into this problem with the B58 or B48, mainly n52s up to n55s, but, the green o-ring with the OEM filters are the only ones which DO NOT cause sporadic vanos control faults. There is something about the way none OEM o-rings age that cause them to dry rot. Now that the B series engine has been in the market for some years, we’re starting to see the same issue with the large o-rings built onto the filters. I have yet to have a dry rotted o-ring cause a vanos fault on a B series engine but I have spent my fair share of nervous moments cleaning out bits and pieces of dry rotted plastic from the oil filter housing. Again, great video!!

[@justinbuice]

Thanks for the tip!

[@javianjohnson8746]

Maintenance Before Mods. Currently going through this with my BMW and oh my goodness, you have no idea how much I want to spend my money on the mods that I want! But we must be patient and logical 👌🏾

[@mantismuzik7493]

Fcp is from home in MILFORD CT

[@oshtheld]

Really loved the way you summed up working on BMWs Justin! You start with small stuff and begin working your way up. I've developed a collection of tools from working on my F25 and it's so worth it. BMWs can be very affordable if you do the maintenance yourself and will last a very long time if you treat them right. With the power of forums and software like Carly or ISTA, you can solve pretty much any problem on your vehicle. Even though my car is running fine, I have bookmarked guides for how to replace fluids in the transfer case and differentials so down the line I will already have good knowledge on what needs to be done.

[@stuartwickson8535]

Thanks again, super easy job to do on your own with minimal tools needed. Keep the great videos coming!!

[@mikeshapiro8733]

Great video as always, Justin. Thank you for emphasizing how important maintenance is.

[@GracesChase]

Killing it man! Great job..you make it look so easy. I appreciate your time and effort on all your content.

[@oksymoroni]

Hey Justin just one tip. Before you take the oil filter out, tuck some paper towels around it, that way when you pull it out you catch any oil dripping off and hopefully keep your engine bay looking nice longer :)

[@SpoolinVR]

I do the same. Good tip.

[@stephenhoward936]

Ya got keep it clean or it could get dirty

[@llkjjjss]

If anyone is around Arlington Texas area the dealership there does forty-nine dollar oil changes. If you go on their website they have a coupon.

[@kacperczajka7115]

Saving up to get my first bmw soon and your channel helped me a lot and answered most of my questions. great stuff dude keep it up

[@justinbuice]

Glad I can help!

[@LCordova7]

Love these maintenance vids man. Can’t wait to see all the things you got in planned for it!

[@GiGaSzS]

Owning a car and caring for it is a true enthusiast's spirit :)

[@412Driven]

Your videos give me a chill vibe I would watch you for hours ❤️

[@prayformojo1117]

Our dealer switched our X3 M40i from 0W-20 to 0W-30. We live in Canada so I find the 5W-30 a bit thick for really cold winter days. I was skeptical of the 0W-20 and I think it's used mainly to make the CAFE fleet mileage in NA. To avoid making a mess I use a plastic bag and put the filter in right out of the oil filter housing.

[@MsStephers]

Not sure about the oil change just yet, but I can definitely do the wipers and the engine filter. Thanks Justin. 😉

[@justinbuice]

Glad I could help!

[@G.M85007]

I've agree with you an f30 it's a good car. Everything is easy to replace. The only one a bit hard was cabin filter because of the location. Plus you got planty of room in the engine bay. Not bad.

[@harolddejesus9160]

I just bought a bmw 328i last month so I’m checking all videos.

[@tagibson]

That was crazy how involved the wiper change was! Great vid!

[@justinbuice]

Thanks man!

[@zaidosama8756]

kinda of a new owner here. got a 2016 328i xdrive up in the canada super happy that justin now owns a newer 3 series, i can relate more i guess. like the wipers i didnt know you had service mode until now, its the little things that really motivate thanks for sharing the website for parts and all...new sub too good stuff

[@justinbuice]

Glad I could help!

[@dontleaveamessage]

Didn’t know you owned one... I drove mine from Miami to Houston (16 hours) .. best ride of my life. Enjoy 🌞

[@justinbuice]

Nice! I actually bought mine in Miami as well and drove it back to Michigan!

[@joelongtin7532]

So happy to have found this channel.

[@supramantt10]

Nice! Good to see the F30 getting some love. Lookin forward to your videos with Brian ... ride height adjustments and bumpers next? :)

[@istayhighi1540]

Just traded my 2013 mercedes c300 for a f30. I cant wait. Had a 2008 bmw 328xi and honestly like it more then my mercedes. Time to go back to my roots.

[@pedrodagat6909]

Love your contents!!! Im a mechanic myself and want an m3 but because of u i want to build my own 340i too. I think ill enjoy the process. Very rewarding 😂

[@thegottliebguy]

F30 328i (2016) owner here. Inspiring me to save $ and start trying to do some of this on my own.

[@TheAlexv6]

I have a 2015 f15 35i and my maintenance plan is almost running out can’t wait to start doing my own oil changes 🙌🏼

[@scringe1]

im very happy you made this video. I own a F32 and everything looks pretty straightforward. Thanks.

[@blankface26]

This seriously motivated me to learn how do the maintenance. Gotta save them $$$$$ Thanks for the content!!

[@bogdanarsene9602]

Most of the stuff you have here just got delivered for my E90!

[@DC-dc6ey]

Great video! I picked up a 2016 CPO 340ix about a week ago and have a lot to learn. Didn’t realize there was a power outlet down in the passenger footwell.

[@jakobsonsaussure2952]

i feel like owning a car like this will make me become more invested in learning how to do all these maintenance things. thanks Justin🎉

[@donnadavis6875]

Good job Justin, you now made me want to do my own car myself.. I own the BM 3301... I appreciate you sharing this video.

[@stevenfurayi8607]

Good lighting in the background

[@justinbuice]

Thanks! I'm always trying to improve the lighting

[@WeekendMechanics]

Great video. Couple of points - a couple of ramps are more practical (and I would argue safer) for an oil change. Jacking up a BMW and putting it on jackstands is a topic unto itself... Cheers!

[@malcolmreed-littlejohn8984]

I got an 2018 330i b48 this channel is a big help to me and glad I subscribe ❤

[@A.mazeing]

Thank you for the awesome video. I paid £530 last week on a service. Quick question, what do you do about the service history on the vehicle computer? How do you update the dates to show the service has been done.

[@AlmightyEye]

Did you find anything out on this?

[@A.mazeing]

@@AlmightyEye Sorry bud. I think only garages can do that with their computer if they have the correct software.

[@SkyNdiveProductions]

Awesome video. You have a video on the spark plug change?

[@adrianmlodzik7713]

Hi, I am really enjoying your videos! Good prep before I get my new F30 this weekend :D cant wait ! It would be nice if you could add the song name etc in the description as its nice to listen to haha.

[@toddsmash]

Hey Justin, I wanted to say that, to me, you seem to have really lifted your content game. Your content before was great, but it seems much more polished now. Well done mate. Keep up the good work. And thank you.

[@justinbuice]

Thank you for noticing! I’m always trying to improve and level up the quality 😎

[@kylelee7254]

Just did the cabin air filter and while it was easy-ish, it was way harder than any other car i've owned. And what sucked is I only had the T20 bit so had to use a wrench to get that open.

[@Fourzerofatality58]

This is the kind of content I need since I got a 340 lol

[@DougZbikowski]

I’ve always used 0w-40 Euro blend with good results.

[@Zero-uw8io]

Love the new f30 content man!! Can’t wait for more 👍🏻

[@vern2292]

Dude, you make sick content! I love it. New BMW owner and consuming a lot of your stuff. Thank you very much for doing such a grat job.

[@chongyi2000]

Thank you. Would you have any tips on how to raise/Jack up the BMW?

[@carloscabral8008]

Like to get under it? They have lift pads on four corners under the side skirts

[@mannarmylie4195]

For my F10 there are center jackpoints under the car in the front and rear. The front jackpoint is just in front of the oil plug, the rear is on center of the cross member i think..

[@TheYoungAze]

you should make a video about which top tools we need

[@purpleurkle948]

Just got my first 328XI super excited!

[@bigbrushlittlebrush2]

Brilliant tutorial thanks from NEW ZEALAND

[@victorb3322]

Great video didn't know about putting the wipers in service mode .

[@jwbonnett]

"You got to start out small, no one really starts with..." Yeah my first was replacing a headgasket lol

[@IvansBikesBmws]

Nice video! The cabin filter is $200 cad replaced by dealer. Oil is another big one.

[@rays-777]

Now I watch a ton of DIY BMW videos cuz I'm a new BMW owner in a small town where none of the dealerships here want anything to do with beamers for a spark plug change but one family owned shop wanting to charge almost 400 on my x3. So I did it myself and it was easier than my old dodge ram. Its unbelievable how much one would charge because of the logo.

[@kalcajune]

Amazing video ❤️ I’m so proud for how far you’ve come! I subscribed when I had an E90 2 years ago and now that you’ve upgraded to the F30 with me feels like it’s came full circle. Keep up the grind man 💪🙏🏻

[@haydnj1202]

Great video Justin!! I'm going to try this. Best wishes from England

[@theflea9]

Damn. After owning my bmw for almost 5 years, I never knew you had to put wipers in service mode haha. I was struggling this whole time smh

[@Stannely1]

Lol I always wondered how they do it 😂

[@richardjavier7236]

Werd, I would just take a carpet a put it under so I dont scratch the windshield

[@iangardiner8535]

Nice clear video. F83 M4 just back from main dealer for an oil and filter change and £338 lighter in pocket. Being generous that's around £200 labour charge. Either specialist or DIY next time.

[@85patino]

Awesome video! It’s worth pointing out that the wiper blades live under the hood line for reduce turbulence. How much? No clue but its incremental. Newer VWs also are this way so I guess its a German thing... congrats on the new car!

[@simonromero4294]

Great video Justin, in years with BMW and today I learned the service mode to change the wiper blades, thanks 🙏🏻. Totally off topic but what type of watch are you wearing in this video, super nice sporty classy 🔥👍

[@wvmtns6400]

I have a 2011 E91 wagon. Last week I changed oil and both diffs. I always call BMW to see how much the service would cost me. They quoted $740.00. I ordered all my items needed from FCP EURO as always. Cost me approximately $120.00 for everything.

[@chungocquang]

You should use the same viscosity oil that the manufacturer recommended. The engine tolerance is built specifically around that viscosity. It's not too thin.

[@markwilliamson4834]

Great video and good advice for novice car owners.

[@prohomespa108]

Yes!! Great video! The BMW dealership maintenance center is very very overpriced!! I did some research when my f10 needed a new vacuum pump. So the dealer wanted to charge me $7000.! I went to my local machanic who did it for $700.!! Crazy!! How does BMW get away with over charging that much!??

[@mandingonz7653]

Thank you so much. I'm so glad I found you. I am now going to slowly upgrade my 420i gran coupe and know how to look after it better. You are amazing man thanks again and much love from New Zealand. P.s the only different thing I have to consider is the big switcheroo as I'm a LHD. 👍

[@ArtemDzhadzha]

I buy everything from FCPeuro except oil. I prefer Red Line 5w-30 for my N54

[@Newtorin]

Cool! I didn’t know about the wiper blades service mode! Great info!

[@justinbuice]

Glad I could help!