How I made a 501st Jet Trooper Helmet

[@jimboringo9958]

“This was the first time I had played this game” *raises blaster* “In like 10 years” *lowers blaster a little*

[@derpyshark3305]

I never played it *gets shot*

[@commissaryunion8370]

I got 50 rounds of ammunition to spare, it will take a while...

[@borbleborb4586]

Gatekeeper moment

[@joshwagner9519]

Omg that game. That STUPENDOUS game. My dad and I bonded over that game playing for hours with and against each other. That game was what we spent hours playing and trying to beat an the campaigns and free play. That game hit my nostalgia so hard. I miss it so much. Those were the days.

[@pinkflame7237]

Recommendation: Commander Gree's Kashyyyk helmet

[@gonkdroid7207]

I just made one of these

[@benhalstead1246]

Especially since he went be needing it anymore

[@ayden8658]

With or without the head inside?

[@fendyranger4081]

A tip while pasting the tinted window decal on plastic for the visor: mix a little bit of liquid hand soap with water, spray onto the window decal and attach the decal to the plastic visor. Use squeezee to remove the excess water and you will get a bubble free green visor for the helmet. Leave the decal to dry before you bend visor for installation. 👍🏼 Awesome work once again bro 👏🏽

[@darthgonkus8477]

Looks great I just got my 3D printer hoping to make a helmet my self

[@PurgeTrooper]

Getting closer and closer to 100k!

[@nateeaton7729]

I’m 14 and have played that game for years, it is still a work of art. Also I get super excited whenever I see one of your videos on my recommended.

[@Dribones9]

Gaming is a huge part of my life. And id be pretty confident saying this was the first game I ever played. So this one meant a lot.

[@Jonas-bh1jr]

It looks great. Have you ever thought about selling the whole helmet with paint and everything done

[@ctbarley3423]

He’s done that with other helmets on his website. They’re not really in stock all the time though unlike the files.

[@renascitur7051]

@@ctbarley3423 Yeah and that has a point too. I think he creates each of it himself

[@KristianB07]

What a classic og helmet!! Loved that game!

[@simpleclonetrooper2740]

3:28 if you ever get a chance make that a helmet please!

[@Oktoayy]

the "Cobalt Hero" from the modern BF2 would be a bit of a challenge, but it would be cool to see!

[@jamo7259]

lol i just got that skin yesterday its fire

[@Oktoayy]

@@jamo7259 right? you feel so cool running around with it

[@korloq8968]

I remember this game, it was awesome, and this armor was awesome

[@carlos15528]

Currently printing the Heavy Mando armor you have up for sale on your shop! Thanks for all the great tutorials, I have definitely learned a lot

[@benwallis2047]

The work you do is just incredible.

[@antiqueashes]

This is gonna be so helpful for my 501st helmet build, this is much more updated than your first helmet tutorial! Thank you!!

[@gcmarcal]

Well done! My 4 years old loves tour videos. best regards

[@StyrofoamTumor]

One thing I’ve seen from other videos... you can laminate the window tint instead, should prevent creasing

[@cptalbator9547]

I was hoping for this one. My favorite trooper along the dark trooper

[@generalbricks2113]

DUDE THIS IS AMAZING!! I love the OG battlefront still have it😆

[@Nicemangamingofficial]

you have definitely inspired me to make 3D printed helmets.

[@TheRecollector7594]

This made my day

[@noahwindler2600]

You can use a Dremel to get the bottom layer lines instead of bondo

[@cryptid096]

my friend is getting me a helmet off your website for Christmas and i cannot wait!

[@JackalArtsmith]

Ngl the hand print bondo reminded me of Sev from Republic Commando a lot, would be cool to see his helmet or any Republic Commando helmet made tbh

[@liamcopeland9095]

This was an awesome video. I am a huge fan of your work! Thanks for your inspiration!

[@redvenator2945]

I've played bt2, best star wars game ever

[@TheRecollector7594]

I remember the post you made on this and I have been waiting soooo looong thank you!!!!!

[@Raamad]

Not gonna lie I do miss the Big Baby intro. Nice work as always brother !

[@markgeorge2200]

Wow that looks epic! I love the green!

[@Jeerin_]

I have an idea for the top of the helmet. You should put a hole on the other half of the circle on the other part and the put a small square on the other half circle on the top part of the helmet this way it’s easier to get a perfect fit between the parts. I know I might not have explained this well

[@boredomstudios5464]

And these deserve millions of veiws

[@MrJackben32]

i absolutely love the old jet troopers, and i adore this build!! great job man!

[@brycerussell9113]

I have decided to create my own helmet and armor of Mandalorians and I am planning on buying some of your files to create my own shark ark trooper, and you making armor will really help me and I also use the Coruscant guard. Thank you so much for creating these videos.

[@Pawe-mx9wc]

Oh shit, this is masterpiece. SW Battlefront 2 Original love forever

[@ChazzerB31491]

It's still a work of art

[@redvenator2945]

Woah, i loved those guys!

[@slickpachuco7145]

I remember playing it a lot back then when I was like a little kid we had the original Xbox in the PlayStation 2 at the time because we didn't have that Xbox 360 or that PlayStation 3 but I do remember playing this game a lot because by far it was like one of my favorites and besides you get to play as a clone and stuff like that from Star Wars f****** badass

[@HawpuhGaming]

Which I had half the talent to do anything like that. Always wanted my own armor. It’s so cool!

[@char...3332]

This is cool

[@theterribleclaw4285]

I just got a Phase 2 Clone helmet I want mine to look like a Phase 2 Alpha Class ARC Trooper from the Republic comics.

[@thaty-wingguy9711]

OG was so Danm good!

[@frankiefrankie937]

This man is an artist!

[@Crono099]

Best game fps. ...... Loved the pistol upgrade as its could unload a full clip in 2-3 seconds and take out a fresh droid a shield and all with amp to spare

[@paper-cutprojects8840]

Looks great!

[@Jester0153]

I had an idea that maybe you're keen to. Could you print like small squares and show the difference in the effort like, only use Bondo on one, filler primer only on another, then both? and possibly show the difference in sanding like wet or dry sanding and what effects it has on prints? having one solid video for it might be helpful to newcomers (like me) who are curious why you would wet sand vs not.

[@commandergeokam2868]

The helmet is stunning keep up your amazing job

[@owenslipps2087]

The helmets you make are amazing the one that would be amazing is a bad batch and fives

[@Seth_Lekas]

Congrats in 70k subs

[@NinjaSoldierbviewssecondsago]

Dope helmet keep up the great work bro 👍

[@IrregularGuyYT]

I loved playing OG Battlefront 2, you should have narrated the steps like the 501st journalist. XD Great video!

[@TheRecollector7594]

Finally!!!!!!!!!!!!!!!!!!!!!!!

[@ArcTrooper-]

Great video been waiting for this video keep up the good work

[@timovanzonneveld4087]

Already love it

[@gleamaroonie3037]

You should try making Tech’s helmet from bad batch 😁 Love the vids btw.

[@nialltan]

Love the videos, keep it up! I think you should make obi wan's helmet when he's disguised as bounty hunter Hardeen in TCW

[@milesc0249]

You should make either a Jesse, Kix, or Hardcase helmet

[@lukewarman2248]

I know you get a million suggestions for what to do next, but I still really want to see either Jesse or someone like Commander Doom or Thorn. Anyway love your videos, I am currently working on the Ahsoka helmet from season 7. It's my first one so it has definitely been a learning experience for me, but I can't wait to finish it

[@cole_bole4609]

Looks great

[@hollowedgamer416]

I hope when you say From Mando, you mean the Tank Trooper helmet. I have a project in mind and I know your 3D files would not disappoint.

[@proghostzgamecreed6555]

3:28 Reminded me of Delta -07 "Sev"

[@logiescrappychannel8646]

I’m attempting to make a phase 2 clone trooper helmet right now wish me luck! Nice video

[@johnkris5522]

Mad fire, Recommendation) Gar Saxon Mandalorian helmet (when Darth Maul ruled Mandalore)

[@MandoStudios]

AWESOME!!!

[@renascitur7051]

This is actually the unit I spammed in battlefront back then lol

[@KingJake-om7yq]

I just got a 3D printer, I’m super excited to make stuff like this!!!$

[@USNSCCNJROTC2012]

Next helmet recommendation: Phase 2 Captain Fordo! From OG clone wars cartoon.

[@alexisprojects]

Masking tape before painters tape. I'm going to have to try that.

[@Tyr-qz2lo]

Since you're dipping into the original BF 2, maybe the imperial Dark Trooper?

[@joshstudios7426]

u deserve way more subs and veiws man

[@damiangroen9408]

might be late for tip but maybe you can paint the visor with a transparent color

[@ryzer_red]

Old BF2 is still my favorite star wars game. They need to remaster it asap.

[@theeggman1199]

I hope someone makes a 3d filament similar to kevlar so it gives some protection

[@carrotking0013]

Can you do the Gar Saxon helmet from the seventh season of the Clone Wars. Also for the visor, you could use lighting gels from a theatre light.

[@sophusvainosoerensen2283]

It would be awesome if you could make the tank trooper helmet, from the mandalorian. This video was awesome. I also loved playing battlefront 2 splitscreen on my ps2 when I was younger.

[@moritzpollich8252]

I put the stripes on backwards so they curve to the front.

[@StormEnder]

Awesome job as always!! Please do Boba Fett's helmet with the new paint-job from the Mandalorian

[@krbrickfilms]

OMGG IS THE JET TROOPER

[@imperialbread6321]

Can you do a tutorial for the TIE Pilot helmet next?

[@eugeneborissow]

:0 bout to order my second raw 3d print for this helmet lol

[@oldboi4072]

You should make more storm trooper helmets. Like a tie fighter pilot

[@TheRecollector7594]

Thank you!!!!!!!!!!!!!!!!

[@jensrehnfeldt6866]

This is so awsome

[@bongofett6992]

Awesome

[@borbleborb4586]

Reccomendation: the Urban Fighter commando!

[@fortnutz]

This is amaaaazinnnngggg

[@jnthnwllmn6499]

I would love too see you do Commander Gree Helmet!!!

[@jimijamjr_3060]

i know you prefer the clone wars era, but the mandalorian imperial supercommandos from rebels have a very unique look

[@catching.rainbows]

Every time me puts on the mask for the bondo he reminds me of a death trooper

[@TofuCowMoo]

Great video!

[@sef8989]

amazing.

[@limon_pie1000]

Original trilogy Storm Trooper with extra heavy accessories maybe?

[@madcowrebel4216]

OG BFII... man I feel old

[@shaungraves8357]

For it's time it was a work of art? It's still a work of art now this game was the greatest.

[@DJdegroot]

It looks great, I am still trying to find courage for the hours of printing. A question if you weather it with orange paint does it look like the sands of geonosis

[@ij20man35]

This is damn awesome.

[@slickpachuco7145]

The galactic Marino it always like it when I had the chance to get it

[@stevenallmanguitar]

I’m getting a 3d printer this weekend and will be printing a helmet then

[@apathysyoungerbrotheryoung7507]

What kind of filament are you getting?

[@stevenallmanguitar]

Apathy’s younger brother Younger brother apathy I’m getting pla

[@jacobgruber388]

To anyone who lives in the north: where do you go for painting and other steps that require air filtration during the freezing winter?

[@StyrofoamTumor]

Jacob X a lot of people use garages. That way you can just open the door when you’re done. Not great for the heat bill, but you do what you can up here

[@eyemem5080]

Good game nice helmet