JVC native 4K settings you might have missed

[@DavidSusiloUnscripted]

Please like, share and subscribe Buy me a coffee by clicking the link below www.buymeacoffee.com/DSUnscripted

[@ChateauLeCoak]

Great information. I have a JVC-NX7 and a Panasonic UBP-9000, and your videos have helped me in adjusting everything. You've gained a new subscribers. Thank u.

[@brad3d]

Thanks for the video. The 2.2 vs 2.4 Gamms is more of a preference than a rule. A quick search on the topic shows more prefer 2.2, unless the video is "just right" for 2.4.

[@Audiovont]

What it means 2.2 and 2.4?

[@JimBob1937]

@@Audiovont They're set points for a non-linear curve correction for output brightness. Human eyes don't perceive brightness increase in a straight line (a 1 unit brightness increase isn't perceived as a 1 unit of brightness increase). So a gamma curve is applied, and this affects how the brightness is adjusted per the source material. However, one thing most people get wrong, is that the gamma set point varies with your environment, display brightness, and material. So it can vary a tad and isn't a perfect recommendation, though something between 2.2 and 2.4 is usually good.

[@DarrinBentley]

Clear, concise, and to the point! TY!

[@DavidSusiloUnscripted]

Thank you for the compliments. Kindly subscribe to support my channel.

[@bond2k3]

Do you know if it's possible to switch the memory settings (zoom) without seeing the onscreen menu? It always bothers me, because first I need to select the memory setting and wait a couple of seconds until it's done and then I have to press the memory settings button again to close the menu.

[@DavidSusiloUnscripted]

I bought the older version of JVC remote that has 3 direct access to the memory settings. I just use that for my 3 most used settings: 16:9, 2.4:1, and 1.9:1

[@bond2k3]

@@DavidSusiloUnscripted Awesome. And that switches directly to the format without showing any OSD?

[@DavidSusiloUnscripted]

@@bond2k3 it will still show “loading memory” OSD but it skips the need to go into and out of menu

[@mrenrique90210]

David do you have any recomendable setting for JVC nx7 paired with Ub9000 Panasonic UHD player

[@DavidSusiloUnscripted]

This video is it. It’s done when I used NX7 and UB9000

[@ashontayowens8010]

excellent video thank you so much

[@reznone6900]

Hi I have one of the Panasonic ub9000 connected to mine, I saw in picture mode you used Frame Adapt HDR instead of Pana_PQ. What is the difference seeing both Panasonic and Jvc came together to come up with that mode?

[@DavidSusiloUnscripted]

I find the Frame Adapt is more pleasing to the eyes than Pana PQ so I just keep using the Frame Adapt.

[@arthurlipscomb]

Thank you! Will these same settings work with the NZ7? If you are using a Panasonic player is it best still to go with Frame Adapt HDR or switch over and use Pana_PQ?

[@DavidSusiloUnscripted]

NO. I don’t know yet what the settings for the new NZ series yet. For your second question, based on my personal tests, the frame adapt HDR is still slightly better than Optimizer + Pana PQ setting.

[@frankr9307]

@@DavidSusiloUnscripted Hi David are meaning the auto ( 5 steps ) which is better than the optimiser ?

[@DavidSusiloUnscripted]

@@frankr9307 auto is simply easier to setup. If you don’t really know what you prefer, just use auto

[@Movieman2099]

Do you turn everything off In the motion control settings? I have everything off.

[@DavidSusiloUnscripted]

I turn everything off. I don’t like adding interpolated frame.

[@Movieman2099]

Thank you for the feedback. One other question. Is Theater Optimizer a “must use” option? I never used it on my NX5 but now have an NX7. I thought the picture looked really good without using it on my NX5. I’m testing it on my NX7 and have it set to low, like you mentioned. I notice a smidge brighter picture but nothing that would say “oh, now that’s a 100% better.” Compared to turning the optimizer off. Just wondering your thoughts on that.

[@DavidSusiloUnscripted]

@@Movieman2099 I highly recommend using it if you don’t professionally calibrate it and/or if you use multiple lens memories.

[@Movieman2099]

@@DavidSusiloUnscripted thank for the feedback.

[@GGHTPC]

My menu 3.52 firmware looks a bit different. I don’t see any Gamma settings or picture mode Natural. Appreciate your to the point videos.

[@DavidSusiloUnscripted]

Which projector model number you are using?

[@UnLogitech85]

and when you re done.....you click set and then you re done. you forgot to say it.

[@tonybaldassarre4978]

I have a dla 3000. I have 3d movies on my plex that is on a fire cube. Unfortunately they do not play just see split screen. Works properly on a bluray player. Need help

[@DavidSusiloUnscripted]

You have to have the dongle plugged in and when playing you need to set 3D mode to Side by Side

[@Tomsmoviereviews]

Just a question please with the 4K HDMI cable for picture that needs to run between the projector HDMI 1 port directly to the HDMI 1 port on the 4k player is that correct.

[@DavidSusiloUnscripted]

Yes. Or you can pass it through your 4K receiver

[@briano8000]

what about (jvc dla x7000) 🥺

[@DavidSusiloUnscripted]

No. This video is only for the native 4K projectors of JVC.

[@briano8000]

damn 🥺