JVR Timer Setup Model : HM40P

Programming the timer in this video.
I use the same schedule everyday of the week so my program is very simple. Each day of the week can have its own schedule if desired.
JVR Auto Door : amzn.to/47jojQ0
We participate in affiliate programs including the amazon affiliate program. If you purchase products using our links we may earn a commission.

[@CasperFLSTC]

TY for this. It is easy but so easy to forget :) This is my "Go To" video to remember how to do this!!

[@BruceBarton-y1s]

This video covers ALL of the buttons and how they work. Made my setup a piece of cake ! Thank you for a very informative and correct video ! The button labeled "week" had me confused until the video showed me the "week" button really means "day".

[@deanngreen3991]

You make it look easy!!!! I’ll try mine again !!! Thank you!!

[@staceybaker8292]

Thank you for your video. The instructions from the factory were a bit confusing. Your demonstration is excellent!! I use it every time I have to change time, etc. Thanks again!!!

[@kennethmorgan1249]

Clear, concise, and steady camera work. Excellent video!

[@bobkluck9691]

Thanks VERY MUCH, clear and to the point!!

[@shandaheacock]

Thank you!

[@geriyoung5584]

Thank you so much! I lost my manual and couldn’t remember how to change it.

[@galeanda]

Same with us. We lost it and had to reset after a major power failure and rewiring. And I really appreciated the photos at the end to remind me what's what.

[@MrJonasWhite]

Thank you sooo much! We lost the instructions on how to set the schedule.

[@debbiemorgan5319]

When I was trying to lengthen the door closed I get an err message and the door doesn’t open the next morning nor the next evening. Do I n ed to reset each time I make a time adjustment?

[@projectswithjw]

A reset every time is not necessary. I've found that sometimes when editing that the selected day is wrong. Like open Monday and close Tuesday would cause an error because each day needs two functions to happen.

[@04DynaGlyde]

👍🏻👍🏻👍🏻THANK YOU! I'm certainly going to try this, because I apparently did something wrong the first time.

[@projectswithjw]

I thought the instructions were terrible. Still working well after 8 months and below 0° Temps lately. Hope it works well for you.

[@04DynaGlyde]

Well, when I pushed the reset button the screen went blank. So I'm charging it again just to be on the safe side. Maybe the cold zapped the battery even though I charged the battery last week. I don't understand what's going on, does anyone know why the screen was fine until I reset it? And still nothing, just a blank screen.

[@MakerBreakerFixer]

Simple and informative!

[@projectswithjw]

Thanks for stopping by! I get a lot more sleep since I've added the auto door. 7pm is staying up late for me. My days start at 1am. 😴

[@shalong2438]

I go through the settings everything is just like yours but my light don’t come on? It don’t open can you tell me the problem maybe??

[@projectswithjw]

The light will be on when the door command is to open in either manual operation or in schedule mode. You also need the power supply to the unit to be good. The power supply may be bad. The internal battery will not turn on the red light. Are you seeing the word open on screen?

[@projectswithjw]

The power cord and the servo cord may be plugged into the wrong sockets at the controller

[@GeorgeHall-z8q]

Lockman Gateway

[@thejungleexplorer]

Good job. Thanks

[@tigar0485]

I pushed reset but the timer just went blank. Unplugged and plugged it in. Nothing. Now what?

[@projectswithjw]

I've never seen this issue happen. My best guess is the internal battery died. Do you have the door and controller power cables swapped?

[@littleoldsheshop]

I cannot get it to work for me even following these instructions, I’m not sure what I could be doing wrong

[@projectswithjw]

I thought the instruction book was terribly confusing. I was hoping this would be more helpful. What is not working correctly for you?

[@littleoldsheshop]

@@projectswithjw this was much easier to understand and very helpful, I’m not sure why it isn’t working for me. I have followed it step by step twice and still when the time comes for it to open or close it doesn’t do anything. I have double checked to make sure I have it in auto on mode and that I have the time correctly set to am/pm and in the 12hr mode.

[@projectswithjw]

@@littleoldsheshop Does the actuator work manually? There is also a setting call random that I read about in the manual that causes unpredictable behavior. I never could figure out a way to activate it so I didn't show it. Pressing the Reset and starting over was how it said to get out of that mode.

[@GryphonRonas]

@@projectswithjw Why on Earth would they put a random function on a door??? That's ridiculous.

[@GlennCollins-u9l]

Llewellyn Radial

[@BrandonMurphy-c6y]

Rippin Plains

[@ClementTammy-p7r]

Blick Lake

[@FerdiTerim-p4o]

Heathcote Ridge

[@MatthewVoss-j5k]

Cartwright Rapid

[@GryphonRonas]

The one I just received (and will be dropping off for return tomorrow) doesn't have the timer, everything is through the app. Since this one appears to work, this is the one you want. The app driven door is garbage

[@BettyWoodin-h7t]

Cruickshank Island

[@ClarenceLong-j6s]

Ethelyn Ranch

[@ShirleyWooten-i7e]

Towne Vista

[@EnaCapes-x4m]

Vella Landing

[@MinAcey-l4h]

Conn Crescent

[@DonaldPenaloza-g8u]

Norene Lane

[@LloydBella-x1p]

Joanie Route

[@TitusManor-q7s]

Adelbert Stravenue

[@MaryWhite-u6i]

Madelyn Glen

[@AlanGoodin-y5d]

Nicolette Forge

[@ConradCeleste-t6z]

Spencer Spring

[@HanHysmith-x7n]

Hayes Brooks

[@MarvinDavis-l4q]

Mary Road

[@MonroeGissing-b3g]

Hermann Tunnel

[@TobyGrainey-v9o]

Russel Fall

[@JenniferNichols-d6j]

Isabella Lake

[@MichalHalm-y4t]

Domenick Ways

[@DarrylRodrigeuz-i4x]

Cristopher Cove

[@MadalineRenee-c4p]

Gilda Ramp

[@BirdJeremy-n3b]

Donnelly Ville

[@DelResendes-k5w]

Turner Mission

[@MichelleBruce-u4v]

Considine Parkway

[@JoannaWilliams-o6y]

Morissette Fields

[@순둥-f8s]

Gabriel Burgs

[@EmeraldMonks-s7t]

Baumbach Well

[@HermanAlcantara-x3t]

Werner Plains

[@JonathanHamer-v1n]

Kshlerin Turnpike

[@ReneeVanleeuwen-p9w]

Brady Track

[@MarkThomas-c3d]

Casper Branch

[@HobertBradon-p1k]

Judah Prairie

[@LavernLara-y7d]

Maymie Parks

[@StevenMiller-t7q]

Schaefer Parkways

[@RosaCoakley-e6k]

Hellen Valleys

[@MaxwellHermosura-k6y]

Finn Track

[@JamesMcIntosh-u1l]

Francisco Center

[@CortezBrinker-m5g]

Gusikowski Causeway

[@RobinColes-l9f]

Leannon Port

[@ElroyBayliff-i9b]

Maida Valleys

[@DevinStrotz-m5k]

Bogan Springs

[@EmilyWalker-w8e]

Cremin Parks

[@jadechantalbossuat6110]

François

[@HalifaxKristin-u4y]

Mann Creek

[@WilliamStahr-y5c]

McClure Heights

[@WalkerBack-d4q]

Roberts Viaduct

[@norbertmittermaier7738]

In deutsch

[@BryanQuinn-y7m]

Lavada Extension

[@DeidreWhitley-e8t]

Damian Locks