JX35/QX60 - LED Interior Light Upgrade

If you have the Infiniti JX35 or an early QX60, you likely have the old standard yellow light bulbs. But upgrading to some nice, bright LEDs is an easy and rewarding upgrade to your car. Check it out now!
Required bulbs
-vanity mirrors - 6614 x2
-map lights - BA9S (it has worked for some people, but not for me, if it doesn't, you can use a 194 bulb like I used in the video) x2
-front foot well lights - 194 x2
-door jam lights - 194 x2
-passenger dome lights - 194 x2
-trunk light - 3175 x1
Looking for some equipment? Get it here
Trim Tool Kit - amzn.to/2Qg868c
194 standard bulb - amzn.to/3aNIUzt
194 LED - amzn.to/3aMgwO1
6614 LED - amzn.to/2RvMaGK
BA9S standard - amzn.to/33yM8n0
BA9S LED - amzn.to/3mpntdq
3175 standard - amzn.to/3c4zroa
3175 LED - amzn.to/3hsBALi
Disclaimer
I assume no liability for property or vehicular damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with any and all tools, including but not limited to electrical tools, power tools, pneumatic tools, any lifting apparatus, including jacks, jack stands, and automotive lifts, manual tools, chemicals, lubricants, and any other instruments used within the video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of all above mentioned tools or equipment, or any other items mentioned above, and all information contained in this video is the sole responsibility of the user and not myself or Nexus Auto. Caution is advised and any practices by the viewer is at user discretion. Any tool or part recommendations or links are given for informational purposes only and it should be assumed to be bought at your own risk. I or Nexus Auto assumes no liability for any damages, premature part failures, or incorrect parts made from purchases made online, including but not limited to tools, parts, instruments, jacks, chemicals, lubricants, etc.

[@rtucker1004]

Great video. One additional step that I added - use silver HVAC tape to line the inside of the map light housing. It creates a reflector surface to direct more light down towards the cabin. Tuck a piece in there before sticking it permanently to make sure you like the result. Kitchen tin foil will also work, but it will fall onto the bulb after a few hundred miles.

[@NexusAuto]

That really clever...I like that idea. I think I may...borrow...that idea from you! Lol. What were your results like? Glad to hear the video was helpful too! Appreciate the feedback!

[@CHMPro]

ThankYou. Success. I now have led lights all installed. Your videos are gold to me because I have am ex35 and everything is similar.

[@NexusAuto]

Awesome news. Glad to hear it worked out well with the EX. I never compared the models, so was not sure on compatibility. Looks like it all worked out!

[@charleycfs1262]

Awesome video😊 very easy to install the bulbs with these instructions!!

[@NexusAuto]

Awesome! Thanks for the great feedback!

[@zerinathe]

Thank you for putting this video together. For the map lights in my JX35 I tried couple of different BA9S bulbs and couldn't get them working. I ended up doing what you suggested how you used 194s with pins. Thanks again for your video.

[@NexusAuto]

Great, glad to hear the video was helpful. I had the same problem, but I had others who tried the BA9S and it worked. Not sure what happened lol. But I am happy to hear the video was helpful

[@volodymyrnyc2616]

I have the same problem with front map bulbs, what do I have to do??? Which bulbs exactly are working???

[@volodymyrnyc2616]

@@NexusAuto can you tell what brend did you use???? Thank you

[@NexusAuto]

@@volodymyrnyc2616 the video shows what to do. I used 194 LEDs and wrapped them around the light terminals. Please do it at your own discretion, as I don't want you to damage anything. I can't tell you the brand, as the brand I bought it no longer sold. But Amazon is a good place to look. Check for 194 LED bulbs, and get good quality ones (read the reviews). I assume you already tried the BA9S bulbs, so this is your next bet. Hope this info helps

[@Ja3R0cK]

Very helpful, appreciate the tutorial. Thank you!

[@NexusAuto]

No problem. Glad it helped out!

[@seawallbreeze9616]

Instead of using a screwdriver with a cloth I use a plastic knife and it works great without having to worry about damaging or scratching anything

[@NexusAuto]

Awesome, great tip! Thanks for sharing. Love seeing how people get creative with things you wouldn't otherwise think of!

[@tiskeith01]

Great video. I must be getting old or something but I switched them out to leds and actually didn't like it. It was too bright with that 6000k white. I went back the soft yellow halogen. Just my personal preference. Hard to believe there is something such as too much light

[@NexusAuto]

Nah, I have seen lots of people young and old love LEDs, and others don't. Like you said, it's a personal preference. I love them, but some people get into my car and feel like a small sun is in their eyes LOL.

[@orlandomoreno348]

2 x Cool White LED Ba9s 47830 Interior Map Dome Vanity Mirror Light Bulbs on eBay for the map lights

[@coolguycoolcar]

Correct bulbs for Dome lights BA9S but make sure you buy the non polarized ones. Regular ones don't work. My car is 2020 Infiniti QX 60

[@NexusAuto]

Well, damn. I've tried a few different ones, but never thought to try non polarized ones...never even searched for it. It's so obvious! Sometimes it's a good idea to take a step back and look for the simplest solution! I found some non polarized ones and ordered them. Great tip, thanks!

[@coolguycoolcar]

@NexusAuto what's interesting is that bulb manufacturers don't show these bulbs in their catalogs ( led or not) Your video was very helpful 👍 thank you

[@Miracles895]

Great video I have an jx35 I'm looking to changed all my light to led I need to knw what kinda led I needed thnx

[@NexusAuto]

Hi Jeff. Here is the required bulbs. I have also just added it to the description for the video, in case you need it for future reference -vanity mirrors - '6614' x2 -front map lights - BA9S (it has worked for some people, but not for me, if it doesn't, you can use a 194 bulb like I used in the video) x2 -front foot well lights - 194 x2 -door jam lights - 194 x2 -passenger dome lights - 194 x2 -trunk light - 3175 x1 total bulbs required 6614 - 2 3175 - 1 Ba9S - 2 (but as mentioned, these may not work) 194 - 6 for sure, 8 if you need them for the front map lights as well. Hope this helps

[@Miracles895]

@@NexusAuto now I need this light for the back trunk cause my jx35 I look on ebay none of them fit

[@Miracles895]

@@NexusAuto I have found some of them but now all fit my jx35

[@NexusAuto]

@@Miracles895 perfect. the trunk should be the 3175, with that one, you should be able to get the job done. I love it, one of the best upgrades I did!

[@sorry2belate]

Thanks Ive made it

[@NexusAuto]

No problem. Thanks for watching.

[@tomasdemello1589]

Any videos on how to change the globe box light? I want to replace the stock to a LED one on my 2017 QX60. Thank you!

[@NexusAuto]

Unfortunately, I don't have one on the glove box at this time. I believe it's the only blub upgrade video I haven't done yet. I plan to make it this year, but haven't gotten to it yet

[@msgirl01]

Thank you!!!

[@NexusAuto]

No problem at all.

[@cabenlongest7509]

You think you could make one of these for the Grand Prix, that is if they have changeable bulbs

[@NexusAuto]

Caben Longest i actually have a video for this lol. It's an older one though, and quite a bit rougher than my current stuff. And only covers the roof/dome lights. But check it out. kzbin.info/www/bejne/lXK8mWtpgZl-naM. I may look at updating it covering all lights and better filming

[@mjunaidshaikh]

Thanks for the video. I have a 2016 QX60. For the map lights, you mentioned you used a 194 bulb and also wrapped a pin around it. Can you tell me what type of pin you used and how you did it?

[@NexusAuto]

Junaid Shaikh no problem. Glad it helped. I didn't actually wrap a pin around it, but actually wrapped the pins of the 194 led itself. If you look at the 194 bulb, it has 2 pins that come out and wraps around the bottom. I just pulled these pins straight (carefully) and then wrapped those around

[@mjunaidshaikh]

Nexus Auto Thanks! Looks like the bulb I have does not have any pins that I can pull out. Here is the link of what I bought www.amazon.ca/dp/B071LHP5WP/ref=cm_sw_r_em_apa_i_2umcBbZWHGYDM

[@NexusAuto]

Junaid Shaikh you would be right there. Those look like very high quality bulbs 194 LEDs, but they won't work unfortunately. Here is an example of one that would work 8 T10 168 194 W5W Car White 5 LED 5050 SMD Bulb Side Wedge Light Lamp www.amazon.ca/dp/B00CBQY8MC/ref=cm_sw_r_cp_apa_i_70mcBbQFPWT0W

[@mjunaidshaikh]

Nexus Auto Thanks for your quick responses! I will get the bulb you have mentioned and try it out.

[@NexusAuto]

Junaid Shaikh no problem. Let me know how it goes

[@michaelvanjaarsveld302]

Do you have a video or link on how to replace the HID headlights with LED headlights?

[@NexusAuto]

Unfortunately, I do not have one on the how to change the headlight, or the difference in going with an LED vs the stock HIDs. I do have a video on how to replace the small daytime running light, and it follows the same process, but I have not put that video out yet. It is still unedited. I may do one on the LEDs, but it is not on the radar just yet.

[@Kayshee.]

2825 (silver star from auto zone works fine) for qx60

[@NexusAuto]

Thanks for the tip!

[@Miracles895]

Any led part# I'm charging all my interior light to led in my jx35

[@pt2005web]

Thanks for the video. I purchased the LEDs suggested in your links to Amazon. All are working except the BA9/BAS9 map lights. They fit but no lights. I tried the 194 trick and saw some smoke coming out so I put the original back and try to purchase another set of BA9/BAS9 from another seller to see if that helps. I have 2019 QX60

[@NexusAuto]

I'm having the same problem...I tried 2 sets, and neither worked. But I've seen others who had success. I'm about to try a 3rd set in a few days

[@MrSquishticles]

Thanks for vid, so I installed the dome lights same way as you, however when i tried to get the pin to go around the back, a spark came out and now all the interior lights are not turning on, liftgate, footwell, illuminated kick plates, passenger door lights, dome lights, courtesy doorhandle lights and door puddle lights however all the exterior lights and glove box light are working any solution?

[@NexusAuto]

I would start with checking the interior lighting fuse. 9 times out of 10, that is the problem.

[@MrSquishticles]

@@NexusAuto Do you know which fuse box it is? I looked at the one on the left side of the steering wheel however nothing shows what is labeled as Interior lighting, also by checking the fuse do I replace it or just take it out and put it back in? Appreciate the response and assistance!

[@CHMPro]

@@MrSquishticles I heard there's 3 fuse locations on ex35. Not sure about other models.

[@zerinathe]

@@MrSquishticles it's the interior fuse box, 1st from top on the right hand side 10A, you have a spear one in the box that you can use

[@Evo_Spec]

Does the fade in / fade out (dimming) still work with LEDs? I know it sounds silly but if it stops working then I'd rather stay with halogens.

[@NexusAuto]

That's not silly at all. They actually sell LED bulbs that are dimmable. They cost a little more, but they work great.

[@larryjamesparkerjr.4791]

I tried that where the map lights or (front seat dome lights) are above the center console with Sylvania 194 , and they lit up , then thought i may had heard them flicker out. Before I got them adjusted to a secure and tight position, they bulb burned out. Luckily I got a refund on those set of 2. lol

[@NexusAuto]

Lol nice! Hey, it happens. At least you got the refund on them! Did you try another set?

[@jcfit_3608]

my dude do you know how to replace the gear shift bulb

[@NexusAuto]

I never checked, unfortunately. I believe it is not a regular bulb, but an LED soldered in. I am not 100% sure. I made a video a little while ago on upgrading the shift console, where the gear shift bulb is. The video will help on how to remove the shift console, and give you an idea of what it looks like underneath. kzbin.info/www/bejne/e57ae3dme9x1Y9E Hope this helps

[@eagle___empire3175]

The map light has to be a reverse polarity bulb. I had to find this out by buying multiple bulbs. The correct bulb I should say.

[@NexusAuto]

Awesome! I tried a multitude of bulbs and couldn't get it to work, and ultimately I had to settle for the 194 peanut bulb. do you recall which bulb number ultimately worked out for you?

[@eagle___empire3175]

Well on my 2013 the stock is what they call a mini bulb I believe a #67. So I looked up on amazon #67 LED reverse polarity bulb and it works

[@NexusAuto]

This is good to know. I will give that bulb a try. My manual did not show a bulb number for that one, and when I pulled the bulb, it only said A12v8wk. Nothing else in the base or written on the bulb. I will definitely give a 67 LED a try and see how it works. Thanks for leaving the feedback. If it works out for me, your post will get pinned!

[@dann952]

Just figured this out myself and was about to post it! After installing the LEDs and them not working, I tested them on a 9V battery, and bingo, discovered that the polarity in the car must be reversed. You need to find a bulb with positive terminal on the side and negative at the tip.

[@NexusAuto]

Thanks for coming in and leaving some feedback. Although someone did beat you to it, I still think its awesome to do so. All this helps the viewers out. the 9v battery was clever. Thanks again for watching!

[@amgguy2145]

Do you have a video on how to replace the license plate light?

[@NexusAuto]

AMG Guy yes I do...kinda. it is actually already filmed, but I still have to edit it together. I should have it out soon.

[@amgguy2145]

Nexus Auto thank you. Please put a link when you’re done editing it. I got the whole led kit for my QX60 and just not sure how to install the license plate light.

[@NexusAuto]

AMG Guy sounds good. I had the video set to go out a bit later on, but I'll move it ahead on my schedule and tag the link when it's up. Thanks for watching! Stay tuned

[@amgguy2145]

Nexus Auto do you have problems with the backup camera at night not bright enough to see what’s far behind you?

[@NexusAuto]

AMG Guy it's definitely not the best back up camera for sure. It's not very good with handling low light situations. I did swap out to LED reverse lights which helped a bit, but it's still not great

[@concepcionbenavidez9518]

Hello, I was changing my interior light JX35 followed your video. I tried to install a dome LED light that did not fit, it’s a flat looking LED, not round like the one I took out. Now none of the interior lights will turn on. I checked the fuses below the steering wheel and the fuses are good. Do you know any other parts I should check/troubleshooting? Thank you for you time and videos.

[@NexusAuto]

Hello. I am sorry to hear this has happened...that is frustrating for sure. First, let me ask, is it all the lights, as just the roof lights? Or all lights, like even the dashboard lights and cluster lights?

[@concepcionbenavidez9518]

Nexus Auto it is all the interior lights dome, and doors. All dash lights and panel are perfectly fine.

[@NexusAuto]

@@concepcionbenavidez9518 Ok that is a good sign. I know this may seem like a stupid thing to say, but did you double check the switched to make sure it can turn on? It is simple, I know, but sometimes it is the simple things. I just want to cover all bases. The first thing I would do is replace the fuse anyways. I have seen many times where a fuse looked perfectly fine, no issues/burn marks/breaks. I still replaced the fuse and fixed the issue. This has happened on a few cars, so it is very possible. If you have replaced the fuse and the issue persists, disconnect the battery and leave the car for half an hour. Remember to write down any settings that are important (radio, audio settings, etc) as this may completely reset the settings in the car. After 1/2 hr, hook up the battery and check the lights. The idea here is that when the light caused a short, it could have told the BCM that there was an error and it shut off the lights to protect the cars. Disconnecting the battery and hooking it back up can reset that system. Give these 3 things a try, and let me know how it goes.

[@gees4442]

Concepcion Benavidez Same thing happened to me it’s def the 10 amp red fuse box where your left leg would be kinda hard to get to. I changed it and all my light came back on

[@enriquejesus4855]

What kind of pins do you have to put in the dome lights?

[@NexusAuto]

For the front ones?

[@Jjeysonjr567]

Hi! I own a 2014 Infiniti QX60 Would you put the link of all the interior led lights please..

[@NexusAuto]

Hey Jeyson, Sorry, I dont normally post links to the bulbs as 1. I dont want to endorse any company in particular, or any bulb, in case they go bad or are terrible, and 2. Companies always go and change their links, so the link can end up becoming a dead link. However, if you just search up the bulbs, you can find them on Amazon, Ebay, online car stores, and local parts stores. All the bulbs are mentioned in the video.

[@jeffbrown5331]

These ones on Amazon pop in without issue: Carr Lighting 400LM Super Bright 3030 5-SMD BA9 BA9S 53 57 1895 64111 LED Car Light Bulb 12V 24V 6000K Xenon White

[@jeffbrown5331]

For the map lights

[@justinarnold7840]

Yep! I put these in my 2014 Infiniti QX60 and they worked with no problems!

[@barcawinabali]

Can you tell me how many 194 do I need for this car and how many bulbs of other kinds?

[@NexusAuto]

If I remember, you need eight 194s, two lights for the vanity mirrors(6614), and one light for the trunk (3175). The video has all the details to confirm though.

[@seawallbreeze9616]

Hey it looks like I shorted out a fuse and can't find where it's located. I checked under the steering wheel which I did find the box but all the fuses seems fine and I also do not see an option for interior lights . Any help would he great

[@NexusAuto]

Hello, sorry for the late reply. Before moving forward with anything else, I want to make sure the right fuse is checked. It is the top right fuse in the interior fuse box, called 'room'. If you havent got the issue fix already, check this fuse and try one a replacement one, just in case.

[@seawallbreeze9616]

Thanks for that , i went back the next day and figured it out . It was weird that interior lights would be called "room lamps" but i got it changed , it was the upper right red 10A fuse. I have since ordered some new LED's that are compatible with my 2018 QX60. Keep up the great work with the videos

[@NexusAuto]

@@seawallbreeze9616 Awesome, glad you got it figured out. I also think it is hilarious to call it 'room' lights. Every other company calls it interior lights, as it should. A weird naming choice lol. Glad to hear once again and thanks for taking the time to comment. I always appreciate the great feedback!

[@theandroidroot1238]

Hi, my dashboard light isn't on at nighttime I can't see any button I checked all the settings, and side buttons, but I don't know why that light is not working. Do you know if there is a light in there for dashboard buttons for night driving?

[@NexusAuto]

I had this happen to me once. Check in the interior fuse box, and there is a breaker switch. It is white, near the middle and sticks out. Pull it out, and wait 10 seconds, and push it back in. It should hopefully reset the dash lights. But be advised, it will reset some other settings, including things like the trip meter.,

[@theandroidroot1238]

@@NexusAuto Now I got another problem on my 2018 QX60 base model My older LCD screen was cracked, so I bought another LCD panel I put the new one in and my LCD was working fine and then this morning I took the new LCD out because my front bezel wasn't aligned properly once I took the new LCD out and then put back everything and since then my LCD is not powering up any more there's no screen no sound nothing, so I thought maybe the new LCD is not good, so I put my old one back and on the old one I'm not getting any power either. There is no display or startup logo. I checked all the cables, two three times, I also unplug AC, and Radio unit and I left just the LCD panel in to see if it works, but nothing. I don't know what causing it I check all the possible fuses and I did not see any of those bad so right now I'm just confused why my LCD screen is not powering up and none of front buttons working like AC, Fan, Radio, if I press eject it will eject the CD out that mean its getting power also I can put vehicle in hazard mode and other than those two buttons none of others aren't working I don't know if someone has any idea or knowledge what could be wrong with it and I will really appreciate it thank you

[@NexusAuto]

@@theandroidroot1238 unfortunately, I could not answer that without being there to test it. Funny thing, I would still say to pull the breaker. It may reset the system (again, it will reset all your general settings as well). Otherwise, I can only say to remove the LCD screen and make sure there is not a bent connector pin or anything like that. I have not removed the screen, so I am not sure what the connector looks like, but checking it would be where I would have started. Can you put on the things like the radio? Do you get audio, just no screen picture?

[@theandroidroot1238]

@@NexusAuto for night driving light there was a 5amp fuse blown by driver's side fuse box I found that one and replaced it now night driving lights are on but still no display, also I found that I can't lock, unlock driver's door with FOB as I could earlier. There has to be a relay or fuse for all, which I couldn't find it, since I checked all of them manually. I took the battery off for the whole night as it was suggested online.

[@NexusAuto]

@@theandroidroot1238 did disconnecting the battery work for you? Or is all these issues continuing after the battery disconnect?

[@Aguilar2313]

Could you send me the link for the 194 map lights? I’m having a hard time finding those

[@NexusAuto]

I purchased them off of Amazon. not supporting this seller or these bulbs directly, just posting for the example. www.amazon.com/AMAZENAR-30-Pack-White-Replacement-Stock/dp/B0182FMWKU/ref=sr_1_6?ie=UTF8&qid=1539617788&sr=8-6&keywords=194+led hope this helps

[@Aguilar2313]

Nexus Auto thanks for your help.

[@NexusAuto]

no problem.

[@Aguilar2313]

Nexus Auto unfortunately it didn’t work or I’m doing it wrong :/

[@NexusAuto]

oh damn, that sucks. Have you tried a different 194? (sometimes the bulb could be a dud). Also , have you tried both side? LEDs are polarity-sensitive.

[@soktheaseng5173]

My lights doesn't come on when the doors is open. It does come on individual and all when button is press. Any idea?

[@NexusAuto]

There is a specific button on the roof console that allows the lights to come on and off when the door is open. If you go to 5:49 on the video, you will see it. It is a light button with the car door open. Make sure that the button is not pressed, if I remember correctly. Try the button and see if that fixes the issue.

[@Dretexashustler247]

This led light is for the map light 2 x Cool White LED Ba9s 47830 Interior Map Dome Vanity Mirror Light Bulbs

[@NexusAuto]

Its weird. That's the exact bulbs I pulled out, and the same LED I put in. And they didn't work. I just tried a different set of BA9S bulbs this year....still didn't work. Some like yourself had the BA9S work, while others did not. I have a theory that some early JX35s had reversed polarities wires into those map lights, and it was changed mid 2013 and have been like that ever since. But I haven't tested that yet. But thanks for commenting. Do you have a link to the ones you used?

[@Dretexashustler247]

@@NexusAuto yea because I tried to do what you did and I blew a fuse and there was a led out there but I had to do a lot of research and found it on eBay

[@chicagoguntimes]

Would you mind letting me know what fuse it is for interior lights ?

[@NexusAuto]

If I remember correctly, it's in the interior fuse box. Fuse 1, which is a 10amp fuse

[@chicagoguntimes]

@Nexus Auto Thanks sir 🙏

[@NexusAuto]

@@chicagoguntimes no problem at all!

[@blzzake]

Will this work for a 2015 QX60?

[@NexusAuto]

It should work. I am unaware of any interior lighting changes made during the production years, so this should still apply.

[@brendacalderon9445]

Folded around how? I wish you would of showed how

[@NexusAuto]

Sorry, what do you mean folded around? Do you have the timestamp where I mention that?

[@SAVTUNES]

AMAZON SELL THE PERFECT MAP LIGHTS', WORKED PERFECT $10 FOR 2

[@NexusAuto]

do you recall the bulb part number, or have the link for the purchase? Would love to have it posted for other viewers.

[@Miracles895]

I may need to have this links pls

[@justinarnold7840]

Phinlion 400LM Super Bright 3030 5-SMD BA9 BA9S 53 57 1895 64111 LED Car Light Bulb 12V 24V 6000K Xenon White

[@svt283]

Those nails came in handy

[@NexusAuto]

Meh, anyone can do what I did, even with short nails. I should know...I have done it with short nails too. But great to see your manicurist skills are up to par. Not many people come to a car video and notice someones nails LOL :P

[@msrm550]

انت مذهل

[@NexusAuto]

Thank you for your comments. Appreciate it.

[@daddyo824]

Map lights use BA9s bulbs

[@NexusAuto]

Indeed. I mentioned it in my description and in the video. Just for whatever reason, the BA9S LED would not work for me. No idea why

[@daddyo824]

@@NexusAuto Ahh, should've listened to the entire video. Non polarity sensitive bulbs may work, link below www.superbrightleds.com/moreinfo/ba9s-ba7s/ba9s-led-bulb-1-led-ba9s-retrofit-car/3/10557/?gclid=EAIaIQobChMIiIaQod7y5QIVD56fCh2ivQ3bEAQYDyABEgLJhfD_BwE

[@Analyzer52]

The bulb is a A12v8wk led

[@NexusAuto]

Are you talking about the front map light?

[@Analyzer52]

Read it off the side of the orginal bulb and then ordered the ones above

[@DONYRCN26]

Just finished doing the backup lights and license plate LED bulbs upgrade, work perfectly. I was upgrading the interior lights, did the trunk, middle seats and got stuck with the dome lights: got a LED upgrade pack from Amazon, but the dome lights are a 2 piece set that connects in order for them to work. My issue now is that I removed the OEM lights and was trying to fit the new ones and it was impossible to twist the pins to make them fit securely and now my interior lights won't work even after reinstalling the OEM bulbs...any ideas??

[@DONYRCN26]

Also, could you list which bulb exactly and the brand you're using for the dome lights as I've looked up 194 LED bulbs and can't find the ones with the 2 pins to go up there.

[@NexusAuto]

That does suck. It is strange, trying to work on those interior lights...especially the dome. Even I had to use a workaround to make the bulb work. I think the fuse may have blown. The positive and negative may have come into contact, and popped the fuse. i would check that first. Let me know how it goes.

[@DONYRCN26]

Yeah, I'll check when I get home and here's a bulb I found on Amazon for the dome lights that has very good reviews and seems to work without any problems (just ordered them) Phinlion 400LM Super Bright 3030 5-SMD BA9 BA9S 53 57 1895 64111 LED Car Light Bulb 12V 24V 6000K Xenon White www.amazon.com/dp/B077TKVY26/ref=cm_sw_r_cp_apa_i_hQQGCb33WS8HH

[@DONYRCN26]

Size is T4W LED bulb

[@NexusAuto]

Awesome, thanks for heads-up. Once you get your lights checked, let me know how this bulb works out. I see others on the link had used the bulb with success. I want to find a proper solution, so this looks like the way to go. As we discussed before, so much misinformation out there. Thanks for the tip!

[@karlkings5258]

Are dimmable?

[@NexusAuto]

Some are, some aren't. When buying, make sure to get ones that can dim

[@xaod1ng58]

After I change the map light, all the interior lights went off. What should i do next?

[@NexusAuto]

Check the interior fuse. Sounds like 2 contacts touched and could have blown a fuse. I would start there first.

[@wilsonvidal9655]

iBrightstar Newest 12-24V Super Bright BA9 BA9S 53 57 1895 64111 LED Bulbs For Car Interior Dome Map Door Courtesy License Plate Lights, Xenon White www.amazon.com/dp/B07H2CFSY3/ref=cm_sw_r_cp_api_i_0yoJFbFK2Y9HR That's the bulb I got to work with my interior map light. Ba9s led NON polarity and much brighter than the 194 bulb hack you did.

[@NexusAuto]

Absolutely. I noted that bulb in my description. For whatever reason, when I installed the BA9S bulb, it wouldn't even work. Tried a few and no luck, but when I bench tested the bulbs they were fine. Really annoying lol. Thanks for the link. I do want the proper bulb in there

[@thecarsectionthecarsection6420]

Who's the one dislike lol

[@NexusAuto]

LOL right? I want to know who the one is! But thanks for the compliment :)