K-head Co2 laser lens head upgrade from American Photonics

100% made in the USA lens and head

[@alb673]

Thanks for explaining that lens diameter does nothing... I was wandering why the different diameters

[@btomas225]

The video assumes that the viewer knows the purpose of this upgrade. I do mostly cutting, in fact that's all I do. I do not engrave. What's missing from this video is the purpose and advantage to the upgrade. Why should I upgrade and what do I do with the adjustable focus lens? Does this option eliminate the need to adjust the bed height? Does this setup provide meaningful functionality to someone like me that only does cutting?

[@americanphotonics9120]

This video was made to be used inside my website. There are 5 advantages of my lens system. the lens is glued.1- it is held in the best possible way to prevent crystal stress.2- it is extremely easy to clean.3- you can't put it in backwards.4- you cant damage it taking it in and out ot clean it. 5- the tolerances i maintain on this assembly means you never have to do a ramp test. and it also does the adjustable focus, and aceptes my alignment tool, and is 100% made in the USA, and I make the best optics in the world! american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser

[@mattltownsend18]

Just received my adjustable head for my k40. Could not be more happy with the quality. However i am trying to set some standards for how high the head should be above the work surface. I am cutting 3mm acrylic mostly. Any recommendations?

[@champagneellison]

my stock focus tool measures at 50.8mm start there and if that doesnt work for you, do a ramp test

[@mikeg.540]

Where I can order this upgrades?

[@americanphotonics9120]

american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser/products/copy-of-k40-16mm-lens-stem-adapter

[@americanphotonics9120]

if you need the adapter for the K head. american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser/products/copy-of-k-series-co2-laser-head-adaptor-16mm-diameter-lens-tube-with-znse-focus-lens-with-or-without-alignment-tool?variant=32069846695997

[@sharzanco]

How i know my laser head type C or K i have no idea! can i send you photo for my head and can advise me