K&N air filter cleaning and recharging

[@vegasdavetv]

A NOTATION - you can spray it from either side, I saw a test years back that showed it did not matter. Its cotton which absorbs through regardless which way its sprayed. yes directions will say to spray from intake side, that would be side where the dirt and bugs are gathered. if it makes you feel better do it that way, but there really is no difference AS LONG AS YOU DONT DROWN IT with fluid. just coat it and be done. thanks

[@jeffjackson9679]

That would make sense as your MAF sensor is right after the airfilter and any excess oil can mess it up.

[@stevensam9786]

Do you think blow dryer would help the drying process

[@nighthawk0077]

@@stevensam9786 perhaps, but KN says specifically do not use one. Let it dry naturally

[@manuelmartinez2722]

What if you drowned it with the oil spray what can I do to fix it ?

[@jandelahoussaye9834]

If you drown it in oil start back at step one and reclean/oil it the correct way

[@raymondsmith7477]

I use a K&N filter myself, and I gotta say, it’s one of the best preventative maintenance investments I’ve made for my Jeep, noticing a significant difference in fuel economy. I was even told to clean every 50,000 miles, but I personally prefer to clean it once a year regardless of mileage considering all the filth it accumulates over time. I actually got mine drying as I’m writing this

[@michaelstanton7010]

First time cleaning mine. How long does it take to dry? I'm at about 10hrs so far.

[@vegasdavetv]

by morning if in a warm place

[@jamalkishan8631]

exactly how much difference in fuel economy

[@jeanpeng2629]

Long time user here. You can dry this filter with hair drier on cold setting after cleaning and blow it if you’d like after oiling to remove any excess residue. Put it on a shop towel or rag to get oil soaked. Hope it helps.

[@brandonlance4life]

interesting that is TRUE really

[@johnl9135]

Thanks for the video very helpful. Good thing I'd saved my old filter because I know one day I will need to recharge this K&N filter and I will need time for it to dry up and recoat it.

[@buddysteve5543]

I bought 2 of them just so I can rotate them without having to find time to dry and be stranded until done. I love these air filters!!

[@TakeThis_L]

My car takes two lmao

[@bongodave13]

I kept my original (still clean) filter so I could let the K&N dry completely for a day before oiling it and putting it back in.

[@joec2174]

Buy two and alternate when changing to clean.

[@Butch1982]

Or buy cheapest paper one...drive few days and replace with your newly oiled K&N. Buying 2 K&N makes economically no sense.

[@joec2174]

@@Butch1982 depends on if your engine was calibrated with the k-n air filter.

[@whifflingtit9240]

@@Butch1982 I just went to a junk yard yesterday and pulled 2 lightly used K&N filters out of the wrecked cars there for $3 each. I have 3 now, including the one that came in my car when I bought it. Tell me how that makes no economical sense.

[@jakethomas_419]

@@whifflingtit9240 They are implying if you buy a new filter…

[@hunterspangler8955]

Lmao no, but one and the cheapest paper filter possible you won’t use the paper filter but like 24 hours at a time every 50 thousand miles or less

[@madmonkey8141]

I clean mine every 6,000 miles Every other oil change Arizona is pretty dusty, especially with all the construction going on in the valley.

[@Raaj_In]

Very good demonstration of cleaning this K& N air filter .. I’ve just bought one and this video has boosted my morale .. thank you for your taking your time for your accurate EXPLANATION .. WELL DONE 👍 .. GOD BLESS YOU ..

[@vegasdavetv]

thanks for your comment on this

[@carlplz00001]

Awww 😍

[@aekuterbach1]

Please emphasize that it has to be bone dry before oil and Never over oil. Good video!

[@AzuarARazak]

Just installed the K&N yesterday for my Proton.. need another one for alternate use.. TQ sir for the tips & instructions 👍👍👍

[@vegasdavetv]

thanks for your comment

[@PCPAyLOAD]

Not to mention gas milage. A good 02 mixture is really important to maintain good gas milage which a lot of people don't even know about. With these gas prices now every penny counts. I have a fully K&N intake and filter system on my Jeep and its given me a noticable bump in gas mileage. Keeping the filter clean makes a real difference.

[@paultroye7990]

Bought a truck was cleaning it noticed I had a K&N air filter never owned one really appreciated your video was very clean-cut direct to the point thank you for your time

[@vegasdavetv]

thank you Paul for your comment and best to you on the truck.

[@jtpro]

Good how to video. What's messed up is I've been using and promoting k&n air filter for years I've installed them on several different vehicles I've have an O2 Silverado and a 06 Cadillac DTS. I recently joined a forum for the Cadillac because it's a new to me vehicle and way out of my understanding or comfort zone for knowing how to do everything on it so to speak. A member posted a video that was very informative about how not to use k&n filters that they don't give you the best air flow. It was done by an independent source that wasn't paid by anybody. I had already invested in the air filter and something I didn't know was that k&n came out with a cabin air filter and I replaced my car's cabin air filter with it. It really hasn't changed my gas mileage per se and it definitely did not go down and like it was mentioned having a reusable air filter minus the upfront expense really saves you money in the long run.

[@aquarius8063]

Yeah, love the K&N filters. I use on my 2018 Challenger Scat Pack. I bought an extra one and when I get an oil change I swop out with a clean one. Clean and Recharge the dirty one, wrap in plastic wrap and sit it on the shelf, ready to go for next time.

[@Dizzyphan]

Another tip is in addition to using the cleaning solution I also soaked this in a bucket of water and Dawn dishsoap. This did a great job of loosening the dirt before using the hose to rinse.

[@ajwillay6888]

That is absolutely excellent idea that I didn't think about with saving the paper filter... Thanks so much for this

[@vegasdavetv]

appreciate your comment

[@roberthillsjr.3729]

You did a very through video of the whole process. I just bought a new K&N filter for my new Tundra 4.6 , for I know the outcome. I did it on my old Tundra, bigger engine and it gives the engine , like a new tonic. It does work and that is a fact. Thank you for showing this video for I was not sure of cleaning the filter after use. Again, thank you for the video.

[@vegasdavetv]

thank you for your comment on this. much appreciated

[@bigfootswatching9986]

Careful with over oiling it.....It will mess up your Mass Air Flow sensors.....That's the only Issues with these products.

[@Ffsdevgj]

I just purchased this air filter for a GM aveo… I will see how it works, I have read some many great reviews about this product… we will see. Thanks!

[@jeffmorrow1095]

Great video, I've had the K & N in my Tacoma for awhile, however I didn't use enough oil, so I recharged, using more, but not too much and wow, what a HUGE difference. Well done Sir.

[@vegasdavetv]

much appreciated comment

[@ralphcintron6195]

yeap i didnt think about saving the old one

[@ddanster91]

Hi always spray the oil on the intake side as you don't want to get any oil on your sensors to or you could get check engines lights or engine codes Remember do not over oil the filter hope this was helpful

[@chrisdik5311]

In the video it was the correct side or not?

[@ddanster91]

I believe it was the wrong side he sprayed

[@MountainMan7.62x39]

Hey thanks man, I appreciate the time you spent doing this.

[@vegasdavetv]

thank you for your comment my friend

[@danielmcgrath9369]

@@vegasdavetv My bike rev's freely and faster with new K&N,thanks everyone.Good Filters.

[@roboutdoors_21]

Great vid man. Did this today to my jeep. You are absolutely right about changing the filter out sooner. After about a good 15 - 20,000 miles mine was super dirty. I'm on and off road.

[@vegasdavetv]

very nice, thanks for your comment my friend

[@snakeone007]

Seemed like you over oiled it a bit but you got the idea 👍🏼

[@rduncan00]

Make sure not to over spray the oil cause you do not want to cause issues with the fuel sensor. Those things can be a pain to replace.

[@turbsifc1974]

Not fuel sensor. MAF(Mass Airflow) sensor, which can be cheap or expensive depending on the application.

[@DeltasAdventures]

Thanks! Had a KN on for a year now, just had to clean and recharge it. Nice Jeep btw, 2016 JK here. 😊

[@EnkinduGamer]

I recently bought a used 08 Santa Fe GLS, and I was replacing the engine filter with a new economy one when I decided to look up the part number for the old one. Sure enough, it's a K&N AF5833. I almost threw it out! It's very very dirty. I'm not sure if it can still be reused, but I'm going to try cleaning and recharging it. If it works, I'll have the economy one to use while the K&N is drying. Thanks so much for the tips!

[@EnkinduGamer]

Ah, it has Made in China on the filter. I guess it's a fake.

[@zigwil153]

The one caveat... while the filter will last forever K&N's special cleaner does not. 🤨. It's changes the cost dynamic when considering throwaways. (For the record, I use K&N's in our three cars. I think they are simply better)

[@guitarguy3221]

I'm getting typical chevy p0300 random misfire on the highway after my 5.3 swap. One thing I noticed was my new k&n looks dry white like your example. Doubt there's adequate oil on there which could let bugs and dirt shoot all up inside the motor at highway speed. I'm going to oil the outside of my cone to prevent it getting to the Maf. Theres also the question of cone filter vs k&n drop in - since most vehicles have a stock cold air system with how the ducting directs air to the filter

[@slit4659]

I have one of these KN Filters on my Dodge.....I also bought a Cheap filter to throw into my Truck while my KN is Drying..... Sometimes I'm not going anywhere and have time to let the KN Dry......If I have to go Somewhere I just throw the Cheap filter in And Change the Filters Later...

[@nunya7319]

TY for the info. Just got a 2020 Titan Pro X, replacing the factory filter with a K&N. Great vid. Definitely helpful.

[@TechCrazy]

The amount you have to spray they last for like what two cleanings? Plus, you might want to do a final rinse with distilled water. Salts and minerals in the water will eventually clog the pores.

[@Dizzyphan]

Yeah.....last time I sprayed oil on both sides. The oil on the top side ended up messing with my intake and I ended up paying a shop to clean my intake and throttle body. This time before I sprayed the oil while the filter was drying, I took a rag and cleaned all the black gunk from the bottom of the air box. I'm now only spraying the underside of the filter and went lighter this time.

[@cesarross9874]

Great and well explained video.. thanks..

[@lightfreak]

Thanks 👍👍👍. My filters drying as in typing this😁😁😁😁😁. THANK U AND STAY SAFE😁

[@victorbarrera3144]

Exelente i just did that right now waching your video and mine work exelent thank you brother

[@FastLifeHemi]

I use a pressure washer to cleam my kn filter.. I just dont hit the trigger i let it get a hard mist and that rinses it out the best... Ive been doin it for years on same filter no issues

[@christopherholden6414]

Was pondering the same dang thing. Wouldn't hurt a single bit.....

[@chrsshears4528]

I buy my K&M filters out of the junkyard… I have 5 Explorer S/Ts so my hobby is getting parts before I need them…in fla you can walk around the junkyards and pull your own parts….so while looking for like new alternators for $30 each…I open the air filter filter box and once in a while …bingo…..brakes..ball joints seats get it before I need it….I also spray wd40 cleaner on the filter..and dove dish soap…then transmission fluid….I also hand water spray hard..don’t know why everybody says just light rinse…and after. Cleaning clean side out. I do dirty side out to get debris stuck and then clean side out again..I don’t think it really matters

[@ercumentdirice8328]

Great video with details and all essential tips. Keeping the paper filter is the way I go and let the oil set for a few days. Getting extra less used kn filters from junk yard is also a good idea (a comment here). Thanks for sharing this.

[@patrickanthony3632]

Did you mean you let the oil set for a few hours, maybe?

[@vegasdavetv]

about 10 minutes

[@ercumentdirice8328]

While the paper filter is on, I just leave the KN out for 1-2 days. Just to make sure if there is some excess oil on one part by mistake I can get that of the filter. I am not in a rush to put the KN in. Of course you can put it back after 10-20 minutes like a lot of people do.

[@patrickanthony3632]

​@@ercumentdirice8328 Do you notice any difference in performance after switching back from paper to K&N?! Heard the difference is not really noticeable, and that would be my only reason of trying it out!

[@ernestomendez2682]

Does it take a few hours for the both drying process? From opening the hood, removing the old, replacing with a new paper, to closing the the hood takes about 10 minutes. Is it worth the extra time? Should I have a temporary paper one to run errands while the filter thoroughly dries before recharging?

[@jaysusu8623]

Question: Do I have to turn the filter over and spray the oil again on both sides in the end?

[@derekrobinson2366]

I’m so confused, multiple videos on KZbin is showing people oiling either the clean side or dirty side and I do not understand which side to do now. I just ended up oiling the dirty side!

[@nebo23]

Why do you need to recharge? a very new concept to me as i've been using the disposable filters and just started looking into using one of these k&N filters... Great Video!

[@singular9]

Let mine dry for 2 hours in wind/sun in 85° F temperature. It always seems were because the wire mesh is cold regardless

[@TheMovement85]

I know this video is old, so idk if anyone will see this, but you dont need their cleaner its basicly just a mild degreaser. Just mix some dawn dish soap with water, and it's basically the same thing. No the dishsoap wont damage anything at all its a very gentle degreaser

[@ricvanwinkle1665]

Please use a mini portable fan for 10 bucks and dry it in low speed. It will be dry in a few hours instead of waiting days bro.

[@roughcutretrospect7235]

Nice came out good. My filter.ismout in sun drying now, though i would watch this to see your spraying technique. cool videos! Thanks!

[@vegasdavetv]

thanks for your comment 👍

[@ddm62571]

Cool video but I think you saturated the filter a little too much with the oil. Just needs a little covering.

[@arrow_head24]

DO NOT OVER OIL-SPRAY YOUR AIR FILTER. I had a lot of oil sitting in the throttle body. I cleaned it out. And check engine light disappeared.

[@roger4375]

This seems like a LOT of trouble to have the privilege of buying a K&N air filter. The filter is expensive, the cleaning solution and oil is an added expense, you still need a paper filter to be able to use your vehicle and the entire process from removing the dirty filter to cleaning it and reinstalling it can span a couple of days. The entire garden hose thing wouldn’t work where I live in the north where it snows and freezes. I’d rather just buy a cheaper one and toss it when it gets dirty rather than go through all this mess. Sorry I’m not a buyer. The video was excellent though and well thought out. Thanks.

[@vegasdavetv]

I understand that fully, even see your point. appreciate the post

[@jeffgroves4533]

Lol you can just use a indoor sink at home🤣

[@RaymondRAYCE]

​@@jeffgroves4533 subzero. Pipes froze over m8

[@BlackSaiyan_]

You missed the point on the Filter sir it saves you money overall, how much depends kinda how much you drive I know they should be good for 200,000 miles but i still would replace anything at 100,000 you get a cheap kit for like 20 more dollars all together you spent 70 maybe 80 maybe less depending where you live. And as a man you should have simple tools like something to at the minimum get a car battery or to get a alternator off because don’t tell me you spend extra money on a tow for something that simple you already said you didn’t like the added expenses. It does save money it does take time but I mean what doesn’t if you really feel that way then be proactive and get a paper one before you take out the KN and I personally don’t change mine for 7,000 miles and it’s usually never dirty or caused my car any problems. I’m not mechanic but I do know how to do the simple things for free rather than keep spending money

[@mrcrazysrt]

This filter lasts up to 2 million miles you are insane it you think you not saving money by doing this

[@sleepe361]

I just use dawn dish soap and hot water and soak it in a bucket as no it comes clean pretty good!👍

[@crazymc3909]

sleepe361 you don’t use hot water that possible can damage it

[@hereandnow8578]

In my cast iron, I have some left over grease from breakfast, can I use bacon fat to oil up my K&N filter i'd hate to let it go to waste

[@bigfootswatching9986]

@@hereandnow8578 Yes please use it for your Filters....don't waste it!! lol

[@bigfootswatching9986]

Go back to sleep....Sleepe. Follow the Instructions, and just don't over oil it!

[@carlplz00001]

Then so, While you there take the extra virgin olive oil and spray the N&N filter too, aaaand done.

[@virgomonkey68]

Cheers mate..good demo..did mine today following your steps and all good..not that hard...whats better is if you have a cold air intake in ss chev over there...you can go to town on cleaning the radiator and condensor coil...once you have rhythm and got the gear.....it will get routine..oh also those little stubborn bug bits that get caught...i put on top of clothes line and sun lights it up and gently picked them out with a angled oring pick...easy.

[@vegasdavetv]

thanks for your comment

[@RenegadeAntonio]

I noticed when I pulled my filter out that the side you sprayed with oil is the outside, the other side sits facing in and pulls air bland is where the dirt collects. does it matter which side you spray ?

[@vegasdavetv]

no

[@dominik-jean]

Pretty sure it should be sprayed on the air intake side.

[@chrislim7976]

Spray oil lightly on the intake side. The caution is overspraying both sides and potentially lighting up your MAF sensor.

[@chrislim7976]

@@SlikLizrd Relax, Chuck. I'm sure KN doesn't recommend dousing the filter in oil. Everyone please stop at once and listen to Chuck.

[@randylee81]

Road trips to visit my brother in the dusty HOT desert Southwest, a K&N filter is the way to go as it also improves the cooling to the engine due to the higher flow of air into the headers. BTW I make sure to remove that plastic cover over the engine bay as well.

[@thehegt]

Dear sir , do K&N air filter damage the engine ? If you left it out to the sun without anything cover it dust will get on the clean side is that gonna be a problem ?

[@ART224]

When I clean and dry mine, I always have some red left over in various places from the old oil. Is this normal? I can never get all the red out from the old oil.

[@AmyHarrison125]

We had K&N in my hubby’s autocrossing car and my Honda. They rocked. Great demo!

[@vegasdavetv]

thank you amy

[@tedmarakas2626]

Very nice and informative video even though it could be half as long.

[@Burntshocker]

Do they come oiled? Or do you have to oil them for first time installation?

[@vegasdavetv]

they come oiled

[@boakaa1233]

@@vegasdavetvso if I live in Florida how many miles each time should I clean?? And you only spray oil not on intake side right?

[@TheIzzjacob]

Thanks brother. Exactly what I was looking for

[@rossevans1774]

That was maybe a little too much oil applied to that clean filter.

[@dailycivicmods]

Did this on my prl filter today took a bit longer than expected due to drying but the car is sitting and will dry overnight

[@LixyHuanggono]

Is it correct that I should spray the oil evenly on the smaller side (the dirty side). How can I tell if I overspray the filter and how to avoid it? Thank you

[@vegasdavetv]

a quick spray across covering all of the filter us good, don't over spray. it should show reddish on filter as color

[@vanthipham8992]

I saw you recharged clean side, is that right way? It should be recharged dirty side?!?!

[@vanthipham8992]

@@vegasdavetv thanks for your feedback.

[@vanthipham8992]

@@vegasdavetv my moto use air filter as contrariwise (air filter is cylinder, air from out site go into cylinder...) any issue if I use K&N filter? Two side of KnN air filter as same?

[@francestevincedalman1624]

I guess if you're using spray, its better to spray oil from the clean side. Otherwise wipe oil from the intake side.

[@brianhamilton2236]

Youre supposed to only oil the "dirty" side. As far as I know.

[@brianhamilton2236]

@@SlikLizrd nope. You put the cleaner on the dirty side. And you hose thru the clean side.

[@Stoneybrownbear]

This video was really helpful. Thank you.

[@Stoneybrownbear]

Do you have to spray both sides of a flat air filter?

[@vegasdavetv]

just a lite spray to coat, not soaking wet

[@Stoneybrownbear]

@@vegasdavetv much appreciated.

[@Mickcotton]

Thank You So Much 😊Cleaning mine right now

[@oscarflores9719]

Does anybody know if I have oil both sides of the filter or does it matter?

[@RoadTrippinforlife]

As always, thanks for taking the time to share this. Im am sure it will help people out. Like me in the future ( one day ) Have a great day brother! thumbs up

[@sphinx5101]

Are u sure u can put it in direct sunlight to try hot strong hun

[@sl5981]

What does the oil do, and what will happen if you dont put the oil on it?

[@mrthingy7921]

Do u add the oil to just one side of the filter or both sides? If just the one side, then which side is it, the side that faces up when it is placed back in the filter housing?

[@chinomeehan9061]

Apply to dirty side

[@yorlik6820]

Didnt this guy recharge from the wrong side?

[@vegasdavetv]

either side will work

[@rveasna22]

Yes he did

[@vegasdavetv]

it doesn't matter what side you charge from as long as you don't drown it in fluid.

[@manuelleos1007]

You can do it from either side. The cotton pleats will absorb the oil either way. I've run 1 for 170k with no issues.

[@vegasdavetv]

thank you, agree fully

[@lazomaniac]

How many times can you clean and reuse these filters?

[@vegasdavetv]

many times

[@Dav1072]

Thanks for the info! Had mone in the car for 18 months and done 12000 miles so due a clean. I thought you only cleaned and recharged the dirty side?

[@vegasdavetv]

it's like a pair of cotton Jean's, shirt, etc. both sides are fine, ik instructions will say dirty side, but both sides with be coated either way. the key is to coat it, not saturate it in oil reapply.

[@Dav1072]

@@vegasdavetv Thank you very much. Great video once again

[@Fajitaman69]

You only spray the oil on one side?

[@Jelsick]

Very informative. Thanks.

[@deezyfosho]

Thx for that. I'm glad to see how it's properly done. I sprayed both sides n didn't realize to only clean one side instead of washing off both. I know now.

[@Chanmantroop10]

kn instructions aren't clear on whether to oil both sides or one. it just says to cover the pleats. I'd assume it meant both sides too...

[@RolandoKiskisol]

I bought a k&n new cabin and air filter intake filter do I need to put those spray before installation?

[@vegasdavetv]

not sure on cabin, it should come pre lubed

[@Breezy-uz1eo]

Really good detailed video!!!!

[@vegasdavetv]

thanks for your comment 👍

[@Gfalkh.57]

And i recommended a small container during the cleaning to collect the abundance from the cleaning process ;)

[@1king911]

Which side do spray oil? Does it matter?

[@vegasdavetv]

don't matter really, just don't overspray

[@lawrencecoore2021]

Need some advice if you have the time to respond sir. I have the same K@N air filter in a 2012 Hyundai Genesis 4.6l. However i bought the car as flood damage and i got to replace the motor due to been Hydro lock. Would you recommend having the filter been replaced or just get the cleaner kit and clean it .

[@vegasdavetv]

replace it absolutely 💯 👌

[@christopherholden6414]

@@vegasdavetv , Most Definite Replacement....

[@rudymontes5050]

Can you use these panel filters without the recharge spray

[@vegasdavetv]

no

[@rudymontes5050]

Ok thanks Vegas Dave.

[@ronrotan7389]

thanks for the dyi vlog.

[@scotte.4624]

Shiiiit.... I've been cleaning my air filter out every oil change LOL!

[@blakenelson4045]

Good job

[@Utsusemi]

Im certain dish soap + water bath would suffice for cleaning then applying some air filter oil after it dries. About to do a first time clean myself.. been researching extensively. That spray bottle cleaner is most certainly a marketing gimmick

[@Chanmantroop10]

the cleaner and oil is also so bad for your health. the warning labels all over it is scary.

[@williampennjr.4448]

I've had 3 cars lasting about ten years each and I never changed the air filter more than 4 times on them. Being that I paid only about $8 for each filter on average I dont see how paying $65 for one would be worth it. If you really want to say money buy as many disposable filters for your car that you think you will need. Its funny how filter prices double every 5 years after you buy the car.

[@Roguesheepdog]

I live in the desert and had to change my filter every other oil change. So I swapped out for K & N and since my car is a high performance car I noticed the difference right way my gas mileage went on approximately 5 miles per gallon because the engine Could breathe finally. I have had my filter for approximately 3 years now an have only cleaned or "recharged" it twice. and I could not believe The things that would have been sucked into my engine if I did not have this filter and how poorly my gas mileage would have gotten on a paper filter. My car takes 2 air filters so it was definitely a upgrade in my experience. And on a dino test to my surprise I did gain 10 more hp.😁

[@chrislim7976]

A KN filter itself is actually a better filter than an $8 disposal filter. The material allows more air flow while still trapping dirt. Not having to replace them is only a bonus.

[@Groaznic]

Holy shit my man sounds just like Denzel Washington!

[@RonaldDavisEncouraging4Christ]

Thanks for helpful tips.

[@isaactaylor5168]

Does it matter if I may leave a few light spots when spraying oil on the filter?

[@vegasdavetv]

needs to be fully covered lightly

[@brianreviewsthings1626]

How important is it to oil it? Can’t the oil affect the mass air flow sensor?

[@chrislim7976]

He should be applying a light coat of oil on the intake side only.

[@dickjackson25]

@@chrislim7976is that the bottom of the filter when placed in?? The dirty side?

[@963hz]

vegasdavetv hey Man great video! I'm 100% ready to clean my filter. And I have the extra paper filter for the drying process. Are you from Las Vegas? Just moved here myself.

[@vegasdavetv]

lived there 21 years but left in 2015, moved to Seattle for 4 years and recently to Orlando Florida

[@963hz]

vegasdavetv cool Man! It’s fun to move around. Thanks for the reply

[@Phishcactus]

i read some places that while you should re-oil / charge from the 'dirty' side, the oil will soak through and color both sides evenly red. i just re oiled mine after cleaning per the instructions in the k & n kit and only the side i sprayed (intake side / dirty side) is red, while the 'clean side' is whitish which it turned after cleaning. i think both sides were red out of the box / before cleaning (minus the dirt obstructing the red on the dirty side before cleaning) can anyone confirm / deny whether i should coat the dirty side in oil a 2nd time until the clean side is colored red via absorption?

[@Roguesheepdog]

Spray both sides just don't over do it but even if u do it's not going to hurt anything. Think about how much water that thing sucks up when it rains.

[@christopherholden6414]

@@Roguesheepdog , Most Definitely True....

[@K_N_44]

@Ben Jacobs yea i noticed the same thing...Air filter was pink/red both sides out of the box but now that i washed it and srayed the oil from the intake side ,the engine side isn't so much red. I think it depends on whether you cleaned the filter very good to become white before you re-oil it

[@1313neoos]

YOU SPRAY THE OIL TO THE WRONG SIDE THIS IS WHY MOST PEOPLE HAVE PROBLEMS WITH THE MAF SENSOR

[@aaatreeservice]

Don't put the K&N cone shape filters in the sun. If the rubber gets too hot it will shrink and won't back go on/stay on.

[@skytech_00]

I just freshly installed a k&n filter how long should I wait before washing and reapplying fresh oil how many miles should I wait. I live in Florida it's not very dusty what's the recommended length of time?

[@vegasdavetv]

30 to 40,000 miles

[@skytech_00]

@@vegasdavetv thank you for the response.

[@markanthony3275]

If in doubt...pull it out and check it against the sun or a trouble light.

[@PapiPerc]

Today I oiled both sides of my C43 engine air filters after cleaning and letting them dry.. should I start the process over and only oil the one side ??

[@vegasdavetv]

your good unless you soaked them

[@motorhead3153]

It's probably a good idea to use a brush nozzle on a vacuum to get most the loose crap off before wetting/cleaning

[@khairellanuar173]

Can k&n cleaner use to bmc air filter?

[@vegasdavetv]

not sure

[@JohnBraman413]

how often should you clean and recharge them?

[@vegasdavetv]

depends on the environment you run in, between 10 and 40 thousand miles