KAHR CM9, CM40, PM9, PM40, CW9 and CW40 Trigger Spring Kit for KAHR CM9 Accessories by M*CARBO

[@MCARBO]

WATCH OUR KAHR CM9/CW9/PM9 STAINLESS STEEL STRIKER GUIDE VIDEO! kzbin.info/www/bejne/foiri2SerJKYb9E

[@moveabledo]

I didnt buy this product, but once again MCarbo has the best takedown and assembly video on the interwebz. Awesome!

[@tramonehodges5306]

Just received my spring kit and stainless steel striker guide rod and completed install with the help of this video. I have the best trigger pull now on my Kahr CW40. Much needed since this is my edc.

[@bobsherrill2672]

I installed mine in my Kahr PM9 on Tuesday and went to the range on Wednesday. 200 rounds of 4 different ammo brands with ZERO malfunctions of any kind. The lighter smoother trigger helped my accuracy a lot. Looking forward to a shorter trigger pull.

[@tontonton9824]

its been 2 years since.how about today? does it still reliable?

[@jamesdewer]

One of the first, quality, compact nines with Glock reliability for hundreds less. I've never had any failiure, of any kind. Just love my cw9 bone stock with at least 1000rds of handloads, I'm getting ready to install a new spring kit. Thanks for making this video.

[@dankydgaf]

Thanks bro. Never really taken any of my pistols apart that far, but this guide made it very very easy. Thoroughly happy with the result! 💯

[@CMBDIA]

Oh nice! You're in clearwater. I'm in Orlando. I'm a big fan of Kahrs and will be picking up the striker guide and this spring kits for all of my kahrs. I have like 4 in this kahr series.

[@slowassmiata]

Just received my spring kit, install was easy , trigger feels great

[@mrwayne5158]

I installed it but my Kahr cw9 is having light primer strikes now and is nonfunctional. It sucks cause i threw away the factory spring kit.

[@localgunguy4992]

ALWAYS keep your stock parts.

[@mrwayne5158]

@@localgunguy4992 Definitely noted since then. Also I found out later that the gun just needed to be cleaned in order for the light spring to correctly strike the firing pin. Unfortunately this is a liability so I'd definitely keep a stock trigger on small guns for now due to reliability.

[@z.s.e.m.]

​@@mrwayne5158I had the same problem, installed it, trigger felt great, went to the range, light primer strikes 👎. Back to factory springs, might try Galloway's spring kit down the road and see if that does what I need it to do.

[@boss94ways51]

​@@z.s.e.m.i might just go with the steel pin from galloway and get rid of that plastic rod

[@z.s.e.m.]

​@@boss94ways51did that as well, extra peace of mind

[@MizeryScratcher]

i did this to my ruger ec9s using his video and it was a breeze! and added aegis short stroke trigger with the vid no prob. awsome pistol now!

[@rogermarshall8991]

Got my baby Daughter a C.W. 9 years ago. If that guide rod is available in stainless, I'm in. I need to order the spring kit for her. Great video 👍👍

[@MCARBO]

Thanks Brother! Glad to hear it.

[@clarencecouch6755]

@@MCARBO I second a stainless striker guide rod

[@kirkwd8829]

What about testing Chris, in terms of light primer strikes? I will be using this for a PM9. As always, appreciate your time.

[@MCARBO]

Christopher Dunton No issues with light strikes from commonly available ammo. Magtech, Federal

[@kirkwd8829]

@@MCARBO Appreciate the update and report.

[@ironhorse127]

Light primer strikes would be my only concern also.

[@TheAceBase]

As far as reliable goes.. how reliable would this be..

[@tomasr7224]

Oh man that was tuff but i did it I have this cw9 bronze model also. That back plate was almost impossible for me but I got it done 😅. The trigger feels amazing and smooth now just gotta range test it now.

[@ElvisFreshley31]

Just did this with a small Phillips screwdriver...besides the springs flying everywhere on me it was a breeze...

[@LatestHour]

I carry a K40 but don't feel the weight of the trigger as much because I'm holding a heavier pistol. As long as this doesn't change the smoothness of the trigger I'll look into it someday.

[@qqkk5581]

If the striker spring tension is reduced does that not reduce the force that the striker would strike the cartridge primer?

[@bobg1685]

The thinking is that the OEM is a VERY strong spring with a tension that is overkill, so a spring with slightly less tension will improve the trigger pull while still having plenty of tension to ensure good primer strikes.

[@Roboticdoughbull3k]

I'm guessing not, but can I use this for my cm45? That's my question..

[@silverhorder1969]

President of Kahr? He looks like 25yrs old ! Lol damn we’re in trouble!

[@joseph395]

I’m having problems with a kahr k40 trigger not resetting, fires once and then not resetting, is their a chance this kit would help the problem?

[@rickcoloh9083]

Where did you find the dual spring guide rod and do they make it for the KHAR 40 cal? Thanks

[@paulruth83]

Does this fit a P9 or do you offer a lot for the P9? I'm definitely interested in the kit plus a stainless rod/pin.

[@pablobogarin7918]

Would this upgrade make my kahr ammo sensitive? I've never had an issue with my Pm9 and don't want to risk reliability.

[@markbolduc7353]

A stainless guide rod is a must. Hope you decide to produce one.

[@pigybak]

take a shot every time he says “alright”....

[@joeltowle2737]

How does it function with ammo? Any hick ups? Will this kit work with the .45acp?

[@Roboticdoughbull3k]

Doubtful, little off topic but I know a Crimson trace laser for cm cw9 or cm cw40 fits my cm45, but internally the spring rates will surely be different enough to matter I'm sure.

[@anthonyclaudio1189]

Is this trigger pak available for MK9?

[@ralphlargo7986]

Great video! I checked out your website, I dont see that the stainless steel striker guide will work for my K40. Do you think its compatible? Thanks!

[@MCARBO]

Yes Sir, it will work for the K40. Will update the website. Thank you for asking.

[@blazerbarrel2]

Will this work for the pm9 and pm40 pistols ?

[@MCARBO]

blazerbarrel2 Yes Sir it will work for the pm9 and pm40

[@scottgarvy]

How about for P9?

[@MrGattor33]

Ok so does this change the trigger draw length any as well?

[@MCARBO]

No, the Kahr pistols are a double action striker system and thus must be a long pull

[@MPGunther1]

Why doesn't Kahr polish the feed ramp?

[@MCARBO]

They are trying to keep the cost down so they can sell them for less.

[@bobg1685]

I have a K40 (thinking about getting the lighter and slightly smaller CW9) and I spent maybe five minutes polishing the feed ramp myself. Piece of cake with a Dremel and some Flitz.

[@joes.7536]

I have never owned a KAHR. But I do have a beretta Nano, And the similarities are high. I’m gonna have to say that Beretta copied this pistol when they built the nano to an extent. I personally would not change a striker spring on a carry pistol. But I support any American firearms company. Good luck to you.

[@AOMartialArts]

Looking to get this for my ST9. Compatibility??

[@AOMartialArts]

Just bought this trigger kit. Although I have a newer model ST9, this seemed to fit quite nicely. Install was simple enough, and now the trigger feels phenomenal!! Can't wait to hit steel to test reliability. If this is GO, my kahr will take 1st place in my EDC rotation over Walther PPS m2 and Bersa Thunder.

[@tiberiud1955]

does this kit work with P9 ?

[@MCARBO]

Tiberiu D This kit will work with CM9, PM9, CM40, PM40, P380, CW9, CW380, and CW40. I’ll see if we can get something going for the P9.

[@tiedyesandalguy5392]

Sold!

[@elvin995]

Will this work for th cw9?

[@MCARBO]

Elvin Ramos Yes Sir it will work for the CW9

[@stevencash9112]

My .40 came with a steel striker pin.🤷

[@RazorTube55]

2:39 - This is how you get a Mcarbo induced idiot slide scratch. Don't use this method of removing the extractor and extractor pins and spring. Remove from the back of the slide after removing the cover plate. Ask me (an idiot) how I know.

[@gunnutperk2331]

Did yall do any safety drop testing with the spring kit??? Also do yall have anything available for the Kahr CW380?

[@MCARBO]

GunNutPerk Yes sir drop tested and passed. This kit will work with the Kahr CM9, PM9, CM40, PM40, P380, CW9, CW380, and CW40

[@Roboticdoughbull3k]

@@MCARBO this wouldn't work for the cm45?

[@Roboticdoughbull3k]

Pricks

[@josephscott6642]

Y is nobody replying to the questions ????????

[@MCARBO]

Joe Ven What’s your question?

[@desiraysmine]

It’s light enough as it is don’t waste your money

[@slowassmiata]

Price is very affordable, sold

[@jamesheath831]

No lubrication of parts on assembly. Ridiculous.

[@davido6880]

Seems a bit complicated

[@donthit707]

🇺🇸✊✊✊✊✊🇺🇸🇺🇸

[@CHF-ut7pp]

Will this work on CW9 3.5 ?