Ruger LC9s EC9s Trigger Spring Kit - Ruger LC9s Accessories | Ruger EC9s Accessories by M*CARBO!

[@darrellmusselwhite6948]

One of the best detailed instruction videos I've ever watched.

[@BaldKeagle]

I'm trying to help a friend with his EC9s, he took it apart and couldn't figure out where an "extra" spring/pin went and it ended up being the safety spring. This helped a lot, thank you

[@davidg8431]

Excellent video. With that said, I believe the 4 1/2 lb trigger pull the LC9 & EC9S come stock with are plenty light enough for a sub compact concealed carry firearm.

[@billboucher9497]

This is the best disassembly/reassembly directions I've seen for my EDC. I carry in my front pants pocket with a DeSantis Nemesis holster, and when cleaning off 3 months of dust I wanted to be sure there was no pocket lint in there with the striker. I looked -everywhere-, and finally found enough info to brute force through it. Then found this video "by mistake". Thank You! (Bookmarked, Liked and Subscribed.)

[@poelpro]

Would not have been able to do this without the detailed instructions. Perfectly laid out. Thank you!

[@cecilkintner4674]

I became aware of MCARBO several months ago. Since then I have ordered several of his kits. CZ75 PCR, SCCY, M&P both in full size and shield. His videos are the best. But when I took the time to view the " about me" video and the video for Mike Simpson's wife, it brought me to tears! Take the time to see these and you will understand! Thank you Chris for your service to our great country! My latest order in on the way including tee shirts for myself and my daughter. We will wear them will pride and share our experience with everyone we can! Thanks again Chris, Cecil Kintner, a supporter for life!

[@accelmemory]

had the trigger bar pop out on me while disassembly, and was completely lost until I watched the vid. You're a lifesaver

[@MCARBO]

Glad we could help!

[@clutchcargo1239]

My LC9S Pro pulled an average of 4lbs out of the box, and after about a thousand rounds, now pulls a 3lb average on my digital Lyman. These are nice little shooters. I like that you make all these cool upgrade parts.

[@jolietjarhead]

I just completed this upgrade. Awesome instructions. Issues I encountered had nothing to do with your instructions. 1. I found that my punch was NOT 1/16 when it did not fit to pull the pin for the striker bar safety. I used a pointy thin piece of metal to remove it. 2. Putting the cove back on the back I missed the multiple references to the "Striker Bar Sleeve" and only looked at the video (12:54) and ASSUMED I should push on the middle if the sleeve vs the edge. Once I figured that out I was golden. I am not a gunsmith by any means of the imagination but I am mechanically inclined. It felt great doing my own upgrade. I ended up purchasing a punch set and block from you and patiently waiting for the items to complete the upgrade. The punch set I received from you was correctly sized for 1/16th ! Can't wait to go to the range!

[@andycommanderify]

Just had to do a detail-strip project for class. This came in absolutely clutch. Thanks for the great video!

[@Tapered3414]

This pistol EC9s is good, the only drawback was in those extra pounds on the trigger, I finally finished the job and I am very grateful for this excellent video that shows us in detail everything to do, thanks!

[@douggrunberg]

Thank you! I just ordered my spring kit.

[@isaacragan9559]

Bought your spring kit and upgraded my wife's lc9s. Now she's driving tacs. Thanks for the great product!

[@Cautionary_Tale_Harris]

Wow I just bought an EC9s yesterday. I've been subscribed for several months so it's crazy to see this pop up in my feed.

[@stoneblue1795]

Very well detailed.... MCARBO has cool aftermarket parts too!

[@bubbabaker6244]

Gunsmithing is still alive and well. Great camera work also. You could probably make Buco in documentries.

[@clutions]

Awesome vid! You definitely have a future!

[@67volksrodder]

Great video. Looks so easy to do.

[@nancybryson5488]

Well, I believe I now have my Ph.D. in EC9s. Blessings upon you.

[@btyhntr]

Outstanding video. Very informative and detailed.

[@Leofitz77]

I just finished installing this kit on my Ruger LC9s. The most challenging part was getting the plastic back plate off. Despite pushing down the small button near the striker assembly and pumping the safety plunger it didn't want to come off. After prying with a small screwdriver it finally came off. This is one of my EDC guns and I think the lighter trigger pull will help improve my accuracy with it. The LC9s has two safeties on it, so I think it will still be safe to carry with the lighter trigger. The Help folks at M*Carbo replied very quickly to a couple questions I had while installing it. Thanks to them...

[@kenmcnulty7018]

Awesome video!

[@marktelep5856]

Mine is 2.7 pounds! I put it in a brand-new EC9s pistol!!!!!! It shot 50 rounds perfectly!!!!!

[@NoClueHowTo]

Excellent video, thank you.

[@tomtruesdale6901]

Installed this kit in my EC9s back in January and it was as easy as Chris showed. One thing I will say is that you should do this over a white towel which would make finding the little tiny parts easier to find when you drop them instead of dropping them on the multi colored dark rug under the table. Don't ask how I know ;-). The trigger pull on my pistol as about 4 1/2 pounds before and under 3 after the spring kit. I really like the pistol but HATE the sights. Ending up painting them so my old eyes could see them. Grand job M*CARBO on this kit

[@nickdelaigle2166]

Does this upgrade shorten the trigger travel?

[@randyburleson8273]

Awesome video

[@user-kp1ei7mn3x]

This is an excellent instructional video.

[@douglasferris]

Thanks very much for the excellent video!! I would have certainly botched this spring install. I am at 3.3 lbs. and the reset is much shorter!!

[@kenbridges8131]

Thank you. very good instruction. also took the mag safety off to. and love the trigger pull too!!!

[@Mr.MattP.E.]

Awesome video. Hey so the EC9S captured spring and guide rod assembly are not replaceable correct? My wife hates the pullback on the EC9s slide. Could your company please make a version of the spring assembly which can be disassembled? If the LC9s and LC9s Pro don't have them either then you could be filling a huge gap in the market. Thank you!

[@nimbly1693]

I just bought an EC9s, what y'all can make next is an extended magazine release.

[@jamesbales4077]

My factory trigger is measuring 6-7 lbs 😮 I have my MCARBO kit on the way. I look forward to the weight reduction!

[@jamesbales4077]

I just got my spring kit today and put it in. Trigger pull is now at 4.5lbs. A massive improvement. Thanks for the great product and great video, as usual.

[@RJ-sr5dv]

Excellent tutorial

[@ANONM60D]

Everything fell off when i pulled out the slide and trigger assembly together. Then i found this video to help me reassemble it. Now, it feels like the safety is on permanently, even when set to fire.

[@donaldanderson7410]

Would this work in a Max9? Not that the Max9 trigger is terrible. Another thing, on any split trigger, is there a way to install a washer (shim) between the trigger and safety? I was thinking of fabricating some washers made of sheet plastic, but they have to be paper thin.

[@georgespadaccini1608]

what a great detailed video

[@OaknShield]

@MCARBO at 1:13 how in the world you made that slide stop to close? I’ve always got to slingshot it cause for the life of me i cant get it to go down with or without ammo. Also will this springs work with a GallowayPrecision trigger?

[@MCARBO]

You may have a burr on your slide stop. It should work with their trigger.

[@OaknShield]

MCARBO thank you sir 👍🏼

[@Justin-LaFleur]

Will this work with the Aegis Short Stroke Trigger?

[@TheGuncollector87]

Could you show how to replace the safety?

[@TheFlyingZulu]

I'm looking for something that takes out a lot of the trigger pull in a EC9S...

[@davidsomerset8411]

I assume this works with the LC9s Pro??????

[@harveybeekerthegreysquirre8262]

Anything in the works for the Ruger American pistols

[@stephenaddair]

Does it take up any of the reset? I don't mind the 4 pound pull but I hate how far the trigger reset is

[@opp.3]

Yo bro could you help me because I put everything together and the trigger is like suck on safety

[@jozsamarika]

George Hegedus I purchased the trigger kit and i reassembled the gun. Worked fine except the trigger would not pull. To make things short i think the pin that goes into the trigger and the torsional spring was not installed all the way in so i think the trigger stock short . I cannot remove the slide. My question ? Can i push the pin from bottom and is room fore it .I hope after remove the slide i can reinstall the pin all the way as it should be. I hope you can help. Thank You

[@jozsamarika]

PS. I have fixed it. 7/6/2021

[@abrahamcuevas1582]

@@jozsamarika how I have the same problem the trigger won’t pull

[@davidsomerset8411]

Any answer does this work with LC9s Pro???????????

[@rubenmurray5751]

Yes Sir! It works!!!!

[@whitedk57]

I also have the LC9s Pro. Used to have the regular LC9 with the mag and external safeties. I prefer the LC9s Pro because I don't want to worry about the safety when the feces hits the auto-oscillator. The pull on my original LC9 was ridiculously long. The Pro is better, but still seems a little hard to pull. I might have to try this spring kit!

[@802tactical7]

How the heck u get the trigger safety out its way smaller then 1/16....

[@pspgamerserjio]

Lol this would be too complicated for me to do especially since I don't have the tools yet 🙃

[@haroldjohnson2041]

why, is it a target pistol. so it dose not hit the primer as hard. so the g u n is not as reliable as before.

[@zenadventurer69]

I think a heavier pull kit would be more useful. A lot of folks think the LC9s is already too light for EDC. I happen to be one of them…the only thing that makes this gun even ownable is the manual safety (as with Glocks, the trigger safety is a placebo).

[@brodygoose7281]

Nerd

[@Critical-Defense]

Why would you need a heavier trigger with a manual external safety? Makes no sense.

[@sammyprestwood3182]

Why didn't you remove the magazine safety while you had it apart removing magazine safety will give it an amazing trigger plus who needs a magazine safety anyway plus the guns just as safe as a Ruger LC9 pro I removed my magazine release safety catch because it's really useless

[@MCARBO]

Removing most magazine safeties does make the trigger better but we wanted to keep the gun in it's normal configuration for the install video.

[@Rumpleskin]

Do you have alot of side play? I remember that folks complained about loose clearances. I want a semi pro. Where I carry I appreciate the safety.

[@johnnyroastbeef3048]

That Ruger is a pain in the ass. I wouldn't mess with nothing for a difference in one pound trigger pull. I'll stick with my glock and my Sig.