FIX HACK DIY - Fix darkened LCD screen for remote, calculator displays

[@vijaydevan]

I love this video, I have a few aircond remotes that have the same issues.. thanks for the tip. I will try it out on one first 😃

[@johnsonlam8881]

Yeah. I have a few that needed to be fixed as well

[@alvinlum123]

I found that the quality of the screen depends on the silver paper. Reflective but matte is good. The purpose is to reflect light but not too shining. I have even used the inside of a milo powder package 😂.

[@melvin1727]

Thanks for the video tutorial. Mine didn’t have a screw in the middle hence I used a flat headed pryer tool and pry it from the side.. and also I didn’t have any left over silver paper (from Cheng Beng) so I used regular white A4 paper that works too.. cheers

[@KakiDIY]

Good tip. Thanks

[@ArmanZakariah]

May I ask, how did you stick it to the panel?

[@adizon2]

How do you stick the paper to the glass?

[@Schroeder9999]

Any silvered paper will do or was it some specialized material?

[@cyrillim4811]

Any white paper will do. I used a piece of tissue.

[@noelunson3996]

What was that silver paper? Is that a special material or any silver or foil paper will do?

[@KakiDIY]

Any will do.. We got it from the inner part of milk or drink boxes

[@poasun1971]

The silver paper. Is it aluminium foil?

[@KakiDIY]

Aluminum foil.... the inside of milk drink box.. it's just to help reflect lights

[@Ckh-m7u]

I have fixed with minimal steps.. i just use a white paper, and didn't clean the glue residue 😂 it works anyway

[@KamarulAzlanAhlengChai]

it would be nice if you peel off that polarise film aswell sir ^^

[@WeNeedSomeMusic]

Will it work on my nokia 😅

[@Maci9390]

Under the foil, the glue is extremely smelly. Is it toxic? Smells like toxic vinegar.

[@malfunction6993]

What the hell is silver paper?

[@melvin1727]

Hell notes silver from the center.. just use regular white paper; that works too..

[@alvinlum123]

@@melvin1727 Brilliant reply. Yeah the center of hell notes are silver 😂

[@minx6362]

Good tips, but i found it another way. Here's the solution! 1. Disperse the remote control. 2. Gently peel the white plastic on the screen without scratch the glue. 3. Cut the cans (coke, 100 plus) as the same size of the screen. 4. Place the cans as you had cut earlier on the glue side. 5. Put an extra layer as a spacer. 6. Assemble everything back and you're ready to go!

[@luisrodriguez8639]

Why all the electronic technicians have long ugly nails, I think I am the only one with short nails

[@368crv]

to dig boggers

[@KamarulAzlanAhlengChai]

easy to peel of any sticker or glue residue than by usiing sharp razor/knife that will harm the lens

[@luisrodriguez8639]

@@KamarulAzlanAhlengChai That is a turn off for a girl, I prefer to use a razor