Boht Aache majne aapke videos Dekh Kar 100 pcs 3 din mai kaga diya Thank You So Much Aapi Video Boht UseFull Hai Thank you
@smartphonerepairwi7752 жыл бұрын
Outstanding video to you sir! I have problem with same issue on door. This fixed my issue.
@mhtyler5 жыл бұрын
well done, and nice touch showing a mistake like in real life...who does that? lol.
@PJSinohin7 жыл бұрын
thanks for also sharing the common mistake. good tutorial.
@Kalaakaar-in6 жыл бұрын
Thanks :)
@yougu74466 жыл бұрын
PJ Sinohin vvvvvvv
@BestAccessDoors7 жыл бұрын
Fantastic explanation! Can't wait for your next video on this topic!
@Kalaakaar-in7 жыл бұрын
Thank you!
@highlonesomehillbilly4 жыл бұрын
Excellent pace on video. Concise narration. Exactly what I needed. Thank you, from new home owner.
@rafaelfaria56392 жыл бұрын
Veri good, Teatcher, congratulations
@lifescomplexities10465 жыл бұрын
Simple and easy to understand tutorial. Well done.👍
@emmyemmanuel2 жыл бұрын
Thanks so much and before watching this video was a nightmare and I couldnt install it by myself & now I fixed it; it also works well
@hermanblackie14757 жыл бұрын
Tx. U saved me money and my marriage. We could not figure the thing out. One view and it was sorted
@Kalaakaar-in7 жыл бұрын
Ha ha ha!!
@mason43456 жыл бұрын
You’ve got bigger problems if a self closing door tutorial saved your marriage...
@kernow626 жыл бұрын
The arm that is attached to the frame should be at 90 degrees for this type of mount. I suspect that you didn't measure anything according to the directions in the box. The distance from the center of the hinge pin to the first hole of the closer and subsequently to the first hole of the shoe is specific and if not correct can make the door not open fully, open too much or take too much force to open the door. Also the distance of the closer to the top of the door is quite specific so the arm doesn't hit the door.
@kironbose74856 жыл бұрын
Very basic the guy has no clue about it & 99 percent door closer user do not see the manual which confirms the 90 degree angle !
@Timbo_slice892 жыл бұрын
Appreciate it smart guys...maybe yall can come out with videos on how to put doors in.
@biswajitsonowal81362 жыл бұрын
Pp
@monalisadas69192 жыл бұрын
Hey Jim, my main door of the house is quite heavy and we have installed a door closer on it. We have also installed a door magnet as a future possibility of keeping the door in open position. But with door closer, the door magnet is not able to hold the door. Any suggestions for installation?
@kernow622 жыл бұрын
@@monalisadas6919 If the magnet is installed correctly it should hold the door in the open position. However you could install a "hold open" door closer arm on the existing door closer instead of the magnet. That would be a better solution unless the magnet is tied into a fire alarm and releases to shut the door electrically.
@kujursameer865 жыл бұрын
The arm attached to the door frame should be perpendicular to it for maximum efficiency.
@romanullahdurrani37363 жыл бұрын
Great...to see you did wrong delebratly...and then done right...i am sure now one fix it wrong after watching this vedio...Thanx
@marcusmartin57585 жыл бұрын
This guy teaching how to put door closer doesnt know how to put door closer the right way. But it works.
@market_trader_13453 жыл бұрын
Very helpful, Thank you !
@sanjeevLambasuchitaChahar3 жыл бұрын
Ok
@sunilindian77143 жыл бұрын
Good
@wallykaspars97005 жыл бұрын
I can almost understand the spoken language. Thanks for the subtitles.
@shadancrystal11872 жыл бұрын
It can be use both side ? Right and left door?
@sannevoets8852 жыл бұрын
Thanks for sharing!
@Kalaakaar-in2 жыл бұрын
Thanks for watching!
@momintanveer12583 жыл бұрын
Is it supposed to be a door closer or can it work alternatively. That's stopping the door from closing automatically
@victoriorinescu9925 Жыл бұрын
Can it be installed vertically? To a door that opens 180 degrees from top to bottom?
@Kalaakaar-in Жыл бұрын
Nope
@Roycekok6 жыл бұрын
We learned from you sir.Thanks.
@RiomaRey6 жыл бұрын
ouuuu I see ... my worker put the door closer in the wrong side ... LOL.... Nice video Ty!!
@Doplegend_4542 жыл бұрын
Does it work as a stopper too?
@Mycikang2 жыл бұрын
This is extremely superb
@irfantaha82426 жыл бұрын
sir thanks for the good explanation and good method of fitting
@Kalaakaar-in6 жыл бұрын
Thank you!
@MyImmaculateQueen6 жыл бұрын
Thanks for uploading
@wangsobo3 жыл бұрын
Good video friend
@kannan-kannan-16562 жыл бұрын
Very helpful thank you
@Kalaakaar-in2 жыл бұрын
So glad!
@98jos6 жыл бұрын
Thank you so much i love India 🇮🇳 ♥️😻
@p0k7lm4 жыл бұрын
very helpful , tnx !🔩🔧🔨
@joseferdinanddesales97925 жыл бұрын
Well done instructional video
@Kalaakaar-in5 жыл бұрын
Thank you
@thahiraabdulla423 жыл бұрын
After fixing , the door is so stiff. Any adjustments
@mbingz69844 жыл бұрын
Let's say i want to lighten the force required to open the door (inward pull, hinge on the right). Do i move the machine towards the hinge or what?
@kernow622 жыл бұрын
You can usually adjust the power spring on the end of the closer counterclockwise to make the door easier to open. Some inexpensive closers do not have this adjustment.
@surfscab4 жыл бұрын
mine works great but the spring creaks when opening ... any idea why and what i can adjust ? Thanks
@RajKumar-yj3fm3 жыл бұрын
Royal Company ka keha pe mile ga ji price kyaa hai sonipat haryana
@honestview6 жыл бұрын
1:45... you also placed the hinge upside down.
@Kalaakaar-in6 жыл бұрын
It was because of the space constraint. But thanks for noticing.
@honestview6 жыл бұрын
;) it just doesnt work upside down, it hits the side of the hydraulic system... p.s. a lot of systems have regulatory arms where you would not run into problem like yours: example image: 4.imimg.com/data4/VE/YV/MY-3634223/door-closure-500x500.jpg
@kamalkishor91822 күн бұрын
Nice trick
@lijosebastian18287 жыл бұрын
how can we adjust the pressure while opening the door... I I have the same (royal) I feel very hard to open the door...please reply me
@Kalaakaar-in7 жыл бұрын
According to the manual adjusting the screw on the side will get it done. But in my experience, you should remove the nut that holds the door to the mechanism. Then close the door. Wait for sometime to let the spring inside the mechanism fully unwind. Then attach it back to the door.
@kernow626 жыл бұрын
That is incorrect. If the door closer has a power adjustment (some cheaper ones do not) then it is a spring tension screw located on the opposite end to the sweep and latch adjustment screws on these imports.
@courtexhibits3 жыл бұрын
I know this reply is old but these models with the offset pivot on the main housing all, even to this day, are difficult to open. The angles have little to no effect. The ones currently on Amazon are also difficult to open. EVEN WHEN YOU USE THE ENCLOSED TEMPLATE TO DRILL THE HOLES AND MOUNT THE BRACKET AND BODY IT WILL STILL BE HARD TO OPEN. If anyone reads this my advise is to spend a few more dollars and get one from Grainger or a model that Grainger sells. It's just a piss poor design. Shame because the material/metal is quality stuff.
@sureshrg65042 жыл бұрын
Nice work bro
@ashrafismail40495 жыл бұрын
I am sorry to say this is not the proper way to do that. You mentioned the catalogue that came in the box and it shows the installation for left and right sided doors. You simply need to use the drawing to mark where to fix the 6 bolts. In your way a lot of adjust will be needed and most probably will not work, but using the catalogue no adjust will be needed.
@Kalaakaar-in5 жыл бұрын
I did not have to adjust. It worked by itself
@AKandSONScollection2 жыл бұрын
How to keep the door opened for the daytime?
@thatsaucyperson22034 жыл бұрын
Amazing fidio, fankyou for the anazimg tutorial.
@arnavanuj3 жыл бұрын
Very good
@rominhawk39497 жыл бұрын
Good video and presentation. Thank you.
@Kalaakaar-in6 жыл бұрын
Thanks :)
@najmikhannajmi22242 жыл бұрын
Than.kyou very much..
@hilarybower6432 жыл бұрын
thank you!
@wladned4395 Жыл бұрын
Attention! The 90 degree angle is incorrect! Such an angle should not be at the lever, but at the thrust!
@Kalaakaar-in Жыл бұрын
Thank you for the information
@sunilrock62772 жыл бұрын
Thanks very useful
@port3d6 жыл бұрын
common mistake was really helpful. thanks
@Kalaakaar-in6 жыл бұрын
I am glad you liked it.
@munavvarkhan24094 жыл бұрын
Very nice
@evergreenking61173 жыл бұрын
Does it also require lubrication?
@sudharsans78345 жыл бұрын
Sir it will use for plastic door
@Anonymous-mz4fn2 жыл бұрын
My mom, sis always leave my room door open thats the reason i want one door closer 😂
@sudiptodas00014 жыл бұрын
Can it be installed on the opposite side of the door?
@Emagick773 жыл бұрын
It has to always be installed on whatever side the henges are....
@firozsiddiqui91624 жыл бұрын
Good video
@michaellovetere51227 жыл бұрын
What's the model number or product moniker of this particular Royal door closer? Thanks..........
@rehaanabdulraffi60586 жыл бұрын
Michael LoVetere ,,hai sir u should need int'l brand: DORMA, md:23.
@Kalaakaar-in6 жыл бұрын
Just check at your local hardware store. Anything is fine.
@saifukadavath76955 жыл бұрын
while opening my door, arms are coming little down and toching door...i think something is wrong...how can i repair it..??
@martins93417 жыл бұрын
Thank you for the video. Is it the closure or door hinges squeaking.
@Kalaakaar-in6 жыл бұрын
The hinges.
@lijosebastian18287 жыл бұрын
thank you sir
@Kalaakaar-in7 жыл бұрын
No Problem.
@alphasiera17575 жыл бұрын
will it work for steel doors?
@jarleriksson89346 жыл бұрын
very love wideo. when more are come? sir you
@RajendraPrasadh6 жыл бұрын
I upload two videos a week
@99137180497 жыл бұрын
In the door closer assembly the part which is installed on the frame..it should be of Aluminium or wood..? k it can also be applied on the wall diectly..?
@Kalaakaar-in6 жыл бұрын
It can be anything as long as you can drive a screw into it.
@chantroirieng5824 жыл бұрын
Thank you very
@thomasdressler99392 жыл бұрын
Now I got extra holes on my door frame exposed what are you gonna do about it I’m a customer and I’m questioning that…….
@dilipraju4054 жыл бұрын
What happens if we push the door hardly while closing
@anthonylimun31234 жыл бұрын
I need this because, I have siblings.
@fst17754 жыл бұрын
Lol
@MermaidEntertainment4 жыл бұрын
Nice
@islamhabib1985 жыл бұрын
Vare nice I do Work in dubai for Alumonimm gless and door Caluding
@prohladhalder80565 жыл бұрын
Thanks
@kaalmahakaal36934 жыл бұрын
What is price
@101090serg4 жыл бұрын
Thank you :)
@karimullabaig41706 жыл бұрын
What mechanism is used in this one..any one please reply me.
@Kalaakaar-in6 жыл бұрын
Mechanism??
@cherifnadineАй бұрын
Merci👍
@mrinal65093 жыл бұрын
How much it
@niihammond68936 жыл бұрын
thanks
@sendoh_ch2 жыл бұрын
Tq
@alejandrocarrasquel-fh7zj3 ай бұрын
Como ponerle precio o repararlos
@Kalaakaar-inАй бұрын
They are cheap. It’s better to replace it
@ParveshKumar-yg8lo2 жыл бұрын
This door closer is not good aluminum I bought 8dorcloser and all are creating noise when doror closes
@hannaareru84414 ай бұрын
Just grease it with WD
@ShekaranJagadeesan6 жыл бұрын
1:15 be sure to check the diagram!? Dude I'm watching this because i don't want to check the diagram! More over, i don't have a diagram!
@BimbusBucklenuts6 жыл бұрын
Shekaran Jag Google it. If you can't find a PDF online then that's on you for buying cheap no-name brands.
@ShekaranJagadeesan6 жыл бұрын
😂😂😂😂😂 i blame that on amazon for sending me cheap stuff
@shivajipanchal61483 жыл бұрын
Ok nice
@VIJAYvijay-el6ml3 жыл бұрын
How to adjust speed
@rahulathwal49435 жыл бұрын
नमस्ते , ऐसे तो थोडे ही दिन मे ढिला हो जाता है।
@blixtkrig5 жыл бұрын
Thank u come again
@patrickjohnson78016 жыл бұрын
You clearly don't do this for a living, by not putting a pre load on the arm you loose your proper Las couple of inches of power, remove the arm from the closer, rotate the arm parallel to the door, take a wrench on the bottom of the closer and turn it to put a little bit of a load on the arm , by have the arm pointing out will some what work except for the last few inches.
@Kalaakaar-in6 жыл бұрын
Yes I dont. Figured it out as I went. Can you make a video and show me?
@patrickjohnson78016 жыл бұрын
Kalaakaar // Custom Fabrication Channel you betcha
@beeeeeee423337 жыл бұрын
nice
@Kalaakaar-in7 жыл бұрын
+LAST GAMER OF WORLD thank you
@roycesmith49235 жыл бұрын
How NOT to install a door closer. 😂
@alexhuerta84275 жыл бұрын
Exactly
@fatimavlog89865 жыл бұрын
Door closer h ya door opener. Hahahaha....
@Kalaakaar-in5 жыл бұрын
Why?
@trueparker5 жыл бұрын
It's called a fire door we have them all the time
@jayeshbari48344 жыл бұрын
How to you repair sir
@DoctorYo15 жыл бұрын
That intro is terrible. Glad I had my speakers turned up so loud at 3 a.m. Thanks.
The closer arm needs to be connected to the body in a position that is diagonal from the body instead of perpendicular. So that when you connect the closer arm to the door frame, you have to fight the spring tension of the arm a little bit to get it to screw into the door frame. Once it's connected, the arm should be almost perpendicular to the door. I use this description to make it easier to understand that you're putting load on the arm so that it has pressure even when the door is closed. You are connecting the arm to the body in an offset position, then winding it only a bit, then you screw it to the door frame with that resistance. I use the adjustment screw on the arm by loosening it, extending the arm, screwing the arm into the frame, push the elbow of the arm until it is mostly perpendicular to the door in the closed position, then tightening the adjustment screw down so that the arm doesn't extend when i let go of it. The goal is to have a door that shuts and latches entirely, rather than the door that closes almost all of the way until the arm relaxes and it stays cracked open.