#224

FT85DB ESC - flipsky.net/co...
VX4 REMOTE - flipsky.net/co...
Music by WOMA - One on One
INSTA - / kamijuins
E-mail - [e-mail]
Videos
1. Remote firmware update (1.2 and 1.2.1 update methods are the same.) - • Flispsky Remote Contro...
2. Flipsky Dual ESC FT85BD DIY Eskateboard Tutorial - • Flipsky Dual ESC FT85B...
3. Flipsky Dual ESC FT85BD DIY ESK8 and Parameters Settings via Remote VX4 Detailed Tutorial - • Flipsky Dual ESC FT85B...
4. Flipsky Dual ESC FT85BD Firmware V1.2 Settings Tutorial - • Flipsky Dual ESC FT85B...
Flisky products discount code: KAMI
Discount products list:
-FLIPSKY FT85BD Dual ESC With Aluminum Case NON-VESC For Electric Skateboard / Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics
-Brushless Motor Sensorless Amphibious Fully Waterproof motor 65161 120KV | 100KV 6000W for Efoil | Ejet boards | Ebike
-Flipsky FSESC 75450 84V High Current 450A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot /Surfboard AGV Robot
-Flipsky FSESC 75350 84V High Current 350A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot/Surfboard AGV Robot
-Flipsky FSESC 75300 84V High Current 350A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot/Surfboard AGV Robot
-Flipsky 75100 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller
-Flipsky 75100 Pro With Aluminum PCB Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller
-Flipsky 75100 V2.0 With Aluminum PB With Power Key Switch Button Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller
-Flipsky 75200 Pro 84V High Current With Aluminum PCB Based on VESC For Fighting Robot Surfboard AGV Robot
-Flipsky 75200 Pro V2.0 With Aluminum CB Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller
-Flipsky BLDC Belt Motor Battle Hardened 6354 140KV 190KV 2450W for Electric Skateboard
-Flipsky Sensored Outrunner Brushless DC Motor Battle hardened 7070 110KV 4200V
-Flash Deals LCD Screen Remote VX4 for Electric skateboard | Ebike | Eboat compatible with VESC
-Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For foil | Esurf | ESK8
-Flipsky 16.3* CNC New Upgrade RKP Trucks For DIY Electric Skateboard | Longboard | Esk8
2.4Ghz Remote VX1 Pro for DIY electric skateboard

[@KAMiJUINs]

If you want to try the easiest and simplest ESC and remote installation with powerful performance and a variety of features... please tune in. And I think It might be a game changer for the DIY scene. Flipsky products discount code: KAMI (For discountable products, refer to the description box.) 강력한 성능과 다양한 기능을 활용해 볼 수 있으면서, 가장 쉽고 간단한 ESC와 리모트를 설치해보고 싶다면... 자세히 시청해주세요. 아마도 이조합이 DIY씬에 게임체인저가 될수도 있을것 같습니다. 플립스카이 할인코드: KAMI (할인이되는 제품들의 리스트는 설명란에서 확인하실수 있습니다.)

[@Brennen_Nisporic]

Nothing I love more than a great diy build. Sometimes it’s fun just to experiment with different wheels battery remotes ect. Keep up the great videos

[@KAMiJUINs]

Thank you for saying that and watching :)

[@just_golds]

Great video again KAMi,your the best e-skate content creator out there all without talking but actions speak louder than words in my book,and like your no gimmick videos.....Funnily enough only this week I was looking at these on Ali-express and I'm interested in buying parts to put my own DIY together and this looks almost plug and play after you've got all the parts.Ideal for me I think. So basically if my Hadean had the room I could swap out the ESC with this flipsky one and probably get more out of it 🤔 again great video 👍

[@KAMiJUINs]

Thank you for saying that and watching too :)

[@skfunk4550]

I might have to get it just to try it on my velar. seems like a very good option for someone who understands nothing to vesc tool. thanks for this

[@just_golds]

Yeah me neither but what a great product to start to understand what all those different parameters mean.And if its as good as it looks there with more than enough power it looks as long as you've got a good battery,motors and good gearing.... I bet you could leave most boards standing! Depending on what deathwish settings you want out of it.😂 I definitely would love to approach the 50mph mark with the right set up.🤔

[@hellcatmd7635]

This looks more difficult to program compared to vesc,in my opinion .vesc you just plug to computer and all settings are there

[@KAMiJUINs]

I thought the same thing as you. Thank you for watching as always bro :)

[@_Zer0202]

I'm late but I never miss my brother's appointment, good review bro 💪 😎 👍 👌

[@KAMiJUINs]

HaHa, I appreciate that bro :) Thank you as always!

[@Cdenham2221]

Just placed my order using your discount code. Thanks!

[@KAMiJUINs]

Thanks :) Hope you enjoy your build !

[@eBoard3R]

*Always surprising me with the song choices bro!* 🤟🏽⚡️⚡️🤟🏽 Another mini movie 👏🏽👏🏽 Kami is right, that horn was loud 😂 Your knowledge, and ability to then build these artisticly still boggles my mind 🔥 Ahh the Gold TSG Pass... I saw pics of the Pass 2.0 in gold... your original TSG Pass looks better. That horn 😂 gives me a heart attack lol. I think I want one! Some people in East London just step in front into bike lanes and the road without lookin.

[@KAMiJUINs]

Thank you bro :) It was almost like a car horn in real life. If you use it, the other person might get angry or can fall in surprise lol. I saw that too... something sleek and neat looked gone.

[@hyun-87]

12V는 2A까지 지원을 하기때문에 전력(24w)을 너무 당겨 쓰지 않게 조심해야 합니다.

[@KAMiJUINs]

네~ 정보 감사합니다.

[@WEEBNOVELSANDSERIES-hm4tp]

so satisfying

[@KAMiJUINs]

Thank you for watching :)

[@africans1968]

When I change the parameters on the remote it doesn't backup. Any suggestions? Thanks for your videos like always 🎉

[@KAMiJUINs]

Parameters are meaningful to the extent that they activate the motor setting, and it seems more accurate to do the exact numerical input in the ESC Setup part.

[@paulr3556]

Hello, awesome review n demo video as always. Quick question, how does reverse work? No having to click any of the two buttons first? Is it if you hold brakes on for a certain amount of time?, and how, does it know when motors are at full stop? Otherwise if you go down a hill and keep brakes on for that time frame, it will kick into reverse while you still going forward? And potentially throw you off? I plan to use this combo to replace Ownboard original carbon AT remote n ESC (It has newer ESC with remote with screen display.) It's a only a 10s board, so after setting ESC to 10s via remote, can I use the 60amp motor max and 120amp battery current max settings on the stock Ownboard battery?, or should I drop it to the 50A motor max n 100A battery current max? Thanks in advance.😊

[@KAMiJUINs]

Hello, thank you for watching my videos. In the case of reverse, if you keep pulling the remote throttle, the board will brake and then reverse according to the set reaction time for reverse operation. (It does not move backward immediately after stopping. You can set the interval seconds.) In the case of hills, it depends on the slope, but if the slope is large, you may not be able to reverse. If the slope is gentle, you will be able to move backward after stopping, but the backward speed will be slower than on flat ground. To determine the output amps of your ESC, you need to know the type of cells and configuration of the battery pack you are using. With that, you can find the maximum discharge rate and the amount of available current accordingly.

[@paulr3556]

Also what what be the max battery amps for an Ownboard Carbon AT using stock battery of 10s4p. Probably not very strong, way less than 90amps? Guessing this part is important, as it could draw too much from battery, and damage battery?? Should I drop it?

[@paulr3556]

Hello again, I have installed this combo in a Ownboard Carbon AT on stock 10s. Works well. I want to build a 12s battery in a box mounted where your one is. Apart from changing cell number in first menu, do I need to redo anything else, like set up ESC again. In other words, can I swap between 10s and 12s easily? Just cell number change? Cheers again 😊

[@KAMiJUINs]

Hello~ :) The battery in the video is of 14S configuration. Changing the ESC settings from 10S to 12S is very simple. All you have to do is change the voltage in the remote settings.

[@JariSiemens]

Considering it takes 20S, This is very interesting product.

[@KAMiJUINs]

Yeah, i agree. I also couldn't believe the price considering ESC's SPAC. I think Vesc's royalties were very expensive lol :)

[@JariSiemens]

@@KAMiJUINs One Question about this kit, Are the lights worth it? Like is the range usable on them?

[@blazbohnec]

Any idea if we could flash custom firmware via stlink to get it to work with VESC tool. Flipsky tool is terrible, no lisp, no field weakening, no anything, its just too basic for wide range of potential buyers, I wish I could use VESC tool with it and not this no brainer fliptool.

[@worachart111]

Nice setup

[@KAMiJUINs]

Thanks bro :)

[@outsidehydro]

Hi, I remember a while back, you made a project using 2 10s batteries in parallel. With this product being able to handle 20s, would it make more sense to put the batteries in series for a 2 battery project? Would it make any difference for torque and speed?

[@KAMiJUINs]

If you configure it as a series 20s, the motor rotation speed increases according to the increased voltage, so you can increase both torque and top speed depending on how you configure the gear ratio. Also, if you configure it as a parallel 10s, you can use twice the discharge rate compared to the series. A setting with a high discharge rate is relatively advantageous for a setting that requires strong torque. (Since the discharge rate of lithium-ion cell batteries is relatively low, even if it is a 20s voltage, it is meaningless as 1P. And you need to check whether the motors you will use support the 20s voltage.)

[@esk8Kyle]

Really interesting product at that price... It looks very similar to spintend vesc but flipsky just put its own software on top. Did u test it at full 100a per motor?

[@KAMiJUINs]

I tested it with a battery pack with a total discharge rate of 180A. And I set a total of 120A for the current. This was really powerful for a street type E-board. And I think 100A per motor would be fine if you went over to an off-road board. And I've tried both of those ESCs, but I felt like this and the Spindend ESC were on a completely different level. This was because the tool program was fully built into the remote. Thanks :)

[@Michaelajacksonfilms]

Thank you

[@KAMiJUINs]

Thank you for watching too :)

[@pablotope3070]

Kami, great video. I am having trouble getting my vx4 remote to get my motors working. I can pair the remote but motors won't spin. Went into VESC tool to make sure on uart but nothing and not spinning. Not sure what else to do. Any help super appreciated. I have a maker x dv 4 esc.

[@KAMiJUINs]

-First, make sure all the wires are well connected. -And check the ESC type and control type in the settings of the VX4 remote. -If it still doesn't work, you should proceed with refaring. -If all of the above methods do not work either, use VESCtool to reset all settings. I don't think it's a motor failure.

[@pablotope3070]

@@KAMiJUINs much thank and super appreciated!

[@zfgesk8]

Puppy was not impressed with the horn :) This is a game changer for DIY esk8, cant belive it took this long for someone to attempt to remove VESC.

[@KAMiJUINs]

My dog is scared and just doesn't like loud sound lol :) In fact, I didn't expect this detailed setting to be possible with the remote until I tried it. I was just surprised

[@BlownMacTruck]

I don’t get it. There are Hobbywing and Ling Yi ESCs if you don’t want to get a VESC-based controller. Though I’m not even sure why you would need or want a closed-source alternative to a freely available open-source design.

[@zfgesk8]

@@BlownMacTruck Are they esk8 specific, commercially available, can they handle high current, can you run motor detection through your handheld controller?

[@BlownMacTruck]

@@zfgesk8No, but you can run motor detection on a VESC-based controller with your phone, which is basically the size of a remote.

[@zfgesk8]

@@BlownMacTruck I Agree, although VESC is bloatware and not esk8 specific. It's great if you intend to squeeze every bit of performance from your VESC-based ESC and you're a DIY junkie. However for the %99.5 of folks getting into DIY esk8, VEST is just overkill and a hurdle. I see us getting closer and closer to RC car-style setup - possibly even using a programming card like Hobbywing already does.

[@RNYJ05ET]

Hello, can you tell the price of this skateboard for the total shipment in France 🇫🇷. How much does it cost thank you😊😊

[@KAMiJUINs]

Do you mean the board or the parts? I will leave the link to the parts that I used. Maybe you should ask them Deck, Truck, Bettery with the box omniesk8.com/products/omni-esk8-electric-skateboard-carbon-deck omniesk8.com/products/omni-esk8-double-kingpin-precision-cnc-truck-diy-electric-skateboard omniesk8.com/products/top-mounted-battery-pack ESC, Remote flipsky.net/collections/non-vesc/products/flipsky-ft85bd-esc-with-aluminum-case-non-vesc-for-electric-skateboard-scooter-ebike-speed-controller-electric-motorcycle-robotics flipsky.net/collections/remote/products/screen-remote-vx4-pro-for-electric-skateboard-ebike-eboat-compatible-with-vesc Wheel set www.icloudwheel.com/collections/cloudwheels/products/cloudwheel-hydro-100mm-urban-all-terrain-off-road-electric-skateboard-wheels?variant=44238180614382 Gear drive kit acedeckboards.com/products/element-2-in-1-gear-drive-kit

[@asdsdasdasda8040]

Hey, great showcase of the product. Got me interested. Do you think it would be easily possible to fit it into Meepo Hurricane with the P42A 12S4P.

[@KAMiJUINs]

The battery specifications seem to be enough to use this ESC. But I think the key will be whether it will fit in the ESC space of the hurricane and whether the motor connectors can be easily replaced.

[@asdsdasdasda8040]

Thank you for your answer and pointing that out. I noticed this is a bit bigger than some of the VESC based which are super small like DV4s which is under 100mm. Also the hurricanes lately have been shipping with the 9-Pin connector, would probably need old style hurricane with the 3 bullet connectors and sensor wire.@@KAMiJUINs

[@jamesmac7040]

What lights are they and how do you find them? How do you hook them up to your battery?

[@KAMiJUINs]

Lights are optional when purchasing an ESC. Also, as described in the video, the lights are directly connected to the ESC. (If you watched the video carefully, you could see that both are well described.)

[@kessil8088]

Hello, is it possible to use this controller with the kugoo g1 scooter, which has 2 wheels of 1000-2000w each with a 52 volt battery?

[@KAMiJUINs]

I think it's possible :)The voltage is within the allowable value. It can be connected to two motors because it is a dual type.

[@Racule]

이런거 보면 진짜 전동보드 라는 취미도 쉬운게 아닌거 같단말이죠 ㅋㅋ

[@KAMiJUINs]

이정도면 엄청 쉬운편인것 같단말이죠ㅋ 시청감사합니다.~

[@thiagomnzs]

In therms of throttling, this is enough to off road? I lost my 75100 single esc recently

[@KAMiJUINs]

I think this is enough to replace 75100.

[@Bikelife-TEZ]

Been watching your videos for I while now I need your help can this fit in the acedeck ares x1 2wd belt drive board I'm on my second esc got this last esc about 3 weeks ago now this morning my boards not pairing I need to change from the acedeck esc to something else what's your take on this

[@KAMiJUINs]

It is expected that there will be no problem with using it due to the specifications. However, the question is whether this new ESC can be inserted into the original ESC space. (If it is a pairing problem, the remote control should also be replaced with VX4)

[@Bikelife-TEZ]

@KAMiJUINs yes its a pairing problem can the vx4 remote work with my acedeck esc

[@Cdenham2221]

I am thinking about getting this remote/ESC combo, but the website gives two options for the remote. 1. FOR VESC4( Focbox Unity) 2. For VESC6 or VESC75. Does anyone know which to buy?

[@pengchaolu4882]

1 FOR VESC4

[@Cdenham2221]

@@pengchaolu4882 I’m not sure what the difference is. This is my second build.

[@KAMiJUINs]

You can use both. Instead, you should send an e-mail to their Servis team before purchasing to confirm that VX4 remote firmware 2.1.1 is upgraded.

[@Cdenham2221]

@@KAMiJUINs Thanks. I will.

[@ino9138]

which vx4 remote should I get? there are two type on the website, for vesc4 and vesc6

[@KAMiJUINs]

go to Vesc6 :)

[@mojoswifty360]

Would this work on a Propel Endeavor 2 GT?

[@KAMiJUINs]

If the space where the ESC used to be is enough, there is no reason not to use it.

[@AddWood]

Would this be good to replace with the Eovan silo esc?

[@KAMiJUINs]

I checked Eovan silo's battery specifications and the total discharge rate is 225A, which seems to be enough. I think it's possible. Then, depending on the type of connectors, some connectors may need to be replaced (ESC connector from battery, motor sensor connector, etc.)

[@MCMXCIX84]

모터에 3선을 제외한 커넥터도 하나 연결 하는거 같은데 다른 3선만 있는 모터는 사용 불가능한건가요?

[@KAMiJUINs]

설정에서 센서리스 모터 타입으로 설정한다면 사용이 가능합니다.

[@MCMXCIX84]

​@@KAMiJUINs 답변 감사드립니다. 모터 사양표를 보면 최대전력(A)값만 나오던데 모터에 사양에 따른 esc 선정 기준이 모터 A값에 1.5배 정도 높은 esc를 선택하는게 맞나요? 그리고 모터 최대전류가 188A짜리 듀얼로 쓴다면 지금 영상의 esc 모델은 연속전류는 200A고 피크 전류가 500A던데 사용이 가능 한건가요? 아는게 없어 많은 질문을 드리게 되었네요 ㅜ

[@onefootsbf]

Do you know how much current can it provide at 12V?

[@KAMiJUINs]

Do you mean the lights? If that's what it means, I'll have to ask them the details. I'll leave a comment here when I find out

[@onefootsbf]

Yeah, because if you want to use other lights (for example long led strips) you need to know how many amps can you draw from it. I checked their product page but didn't find out, just the 5V bec which can handle 1A. Thanks for the answer! Have a nice day!

[@KAMiJUINs]

12V supports up to 2A

[@onefootsbf]

@@KAMiJUINs Thank you!

[@paulr3556]

Please explain this "zero duty mode", you have set to release motor at 8:09 timestamp on your video, on this other video, he puts it on "keep output" what is this setting for please? kzbin.info/www/bejne/nXzCgGyNnaeDkMksi=IXP5yOse9G2qB-PC at timestamp 3:20. cheers. Also to cancel auto reverse on brakes after 0.5sec, can I disable this and only have reverse on double click of mode (LMH) button only? so no auto reverse, manual reverse I guess, like a ownboard remote? Can disable in the current, gear, brake, instead of reverse in there too? timestamp 8:47 in this video of yours above. Or would that disable the reverse switch on remote too? the double click trick for reverse. cheers again, love ya videos. Also what does gear stand for, I just noticed you have current, reverse n brake, no gear? what does gear do?

[@paulr3556]

As long as I have reverse switch set to "on" in the other main menu. UPDATE JUST TRIED IT, and current, gear, brake only selected, and reverse now only on double click on speed mode button, not the on/off switch, or I get a horn as loud as yours, haha.

[@ino9138]

Wow. Not based of vesc

[@KAMiJUINs]

Yeah, it is :) Thank you for watching

[@user-xj7cj4bx3n]

usually diy by Cami was pattern of beauty! but this lights... and especially horn very very ugly

[@KAMiJUINs]

It supports up to 12V 2A, so you can also apply the light you want accordingly :)

[@stephansmith300]

Ubox v2 clone

[@KAMiJUINs]

I don't think so, bro...

[@hyun-87]

UBOX = VESC mutant 이번 버전은 독자규격의 변속기입니다.